{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILS2D851PC1F0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILS2D851PC1F0","canonicalUrl":"https://aoctrl.com/schneider/ILS2D851PC1F0","factsUrl":"https://aoctrl.com/api/mcp/products/ILS2D851PC1F0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider ILS2D851PC1F0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview The ILS2D851PC1F0 is a Schneider Lexium integrated drive combining a 3-phase stepper motor and drive electronics in a single housing, order code ILS2D851PC1F0. It is a 6-pole, single-phase unit rated for 48 V DC supply, delivering 2 N.m of holding torque with an IP41 enclosure for in-cabinet mounting. The module carries CE marking and is built to EN 61800-3:2001 second environment standards, with a shock rating of 150 m/s² per EN/IEC 60068-2-29. The ILS2D851PC1F0 integrates a 3-phase stepper motor and its drive controller into one package, eliminating separate cabling and panel space for a drive module. The 6-pole winding is configured for medium speed and medium torque applications, with a holding torque of 2 N.m and rotor inertia of 1.3 kg.cm². On-board DeviceNet communication handles network control and feedback, while an RS485 Modbus RTU interface at 9.6, 19.2 or 38.4 kbauds provides a secondary serial link for configuration or daisy-chaining. The feedback type is an index pulse, giving a resolution of 20000 points per turn for positioning tasks. Protection circuits include safe torque off, overload of output voltage, and short circuit of the output voltage. The drive is cooled by natural convection and operates on a 48 V DC bus with a power draw of 22.0 W. ## Applications Lexium integrated drives of this class are used in compact motion control applications where space is constrained and a separate drive and motor would not fit — typical in packaging, labeling, pick-and-place, and small conveyor indexing stations. The DeviceNet interface suits multi-axis systems already on a DeviceNet backbone, while the IP41 rating limits it to clean, dry cabinet environments. Within Schneider's Lexium integrated drive range, the ILS2D851PC1F0 sits as a 48 V DC, 6-pole stepper variant with DeviceNet — a configuration specified when the machine network is DeviceNet and the torque requirement is moderate (2 N.m). It competes with other integrated stepper drives in the same torque class but different network protocols (e.g., CANopen or EtherCAT variants). The CE marking and EN 61800-3 compliance make it suitable for European machinery directives.","metaTitle":"Schneider ILS2D851PC1F0 Lexium Integrated Drive, 6-pole, 48 V DC, DeviceNet","metaDescription":"Schneider Lexium ILS2D851PC1F0 integrated stepper drive: 6-pole, 48 V DC, 2 N.m torque, DeviceNet, IP41, CE marked. Shock rated 150 m/s² per EN/IEC 60068-2-29.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Unclassified"],"specifications":{"Phase":"Single phase","Length":"7.4 in (187.3 mm)","Marking":"CE","Category":"US1PC5618288","Shaft end":"Untapped","Standards":"EN 61800-3:2001, second environment EN/IEC 50178 EN 61800-3 : 2001-02 EN 50347 IEC 60072-1 EN/IEC 61800-3 IEC 61800-3, Ed 2","Motor Type":"3-phase stepper motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Winding type":"Medium speed of rotation and medium torque","Feedback type":"Index pulse","Gear box type":"Without","Holding brake":"With","Nominal speed":"300 rpm 24 V 600 rpm 48 V","Rotor inertia":"1.3 kg.cm²","Accuracy error":"+/- 6 arc min","Holding torque":"53.1 lbf.in (6 N.m) holding brake 17.7 lbf.in (2 N.m)","Nominal torque":"17.7 lbf.in (2 N.m)","Shaft diameter":"0.5 in (12 mm)","Protection Type":"Safe torque off Overload of output voltage Short circuit of the output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILS","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"3.3 in (85 mm)","Peak stall torque":"17.7 lbf.in (2 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"125, 250, 500 kbauds","Brake release time":"40 ms","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Brake pull-in power":"22 W","Current consumption":"5000 mA maximum continuous","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55 V","Associated fuse rating":"16 A","Brake application time":"20 ms","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"170 N tensile force) 30 N force pressure)","Number of motor stacks":"1","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"DeviceNet, Integrated","Continuous stall torque":"17.7 lbf.in (2 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"100 N","Mounting holes diameter":"0.3 in (6.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Maximum mechanical speed":"3000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"20000 points/turn","[Us] rated supply voltage":"48 V 24 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"3.9 in (99 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,992.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f1c36e1f9e2f76e558d989152e18325a.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ILS2D851PC1F0/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILS2D851PC1F0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILS2D851PC1F0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}