{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILS2K853PB1F0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILS2K853PB1F0","canonicalUrl":"https://aoctrl.com/schneider/ILS2K853PB1F0","factsUrl":"https://aoctrl.com/api/mcp/products/ILS2K853PB1F0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider ILS2K853PB1F0 Square D Intg Stepper 24 48V Ethernet Ip Brk — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview The ILS2K853PB1F0 is a Schneider Lexium integrated drive — a 3-phase stepper motor with on-board drive electronics, order code ILS2K853PB1F0. It delivers 6 N.m holding torque from a 24-48 V DC supply, communicates via integrated Ethernet/IP, and includes a holding brake. Rated IP41 with a 150 m/s² shock tolerance per IEC 60068-2-29, it mounts on a flange and suits single-phase supply. This unit integrates a 3-phase stepper motor, drive, and feedback into one package — no separate drive cabinet or cabling between motor and amplifier. The 6 N.m torque (53.1 lbf.in) covers positioning axes on packaging, labeling, and pick-and-place machines where holding torque at standstill matters. Accuracy is rated at +/- 6 arc min, adequate for most indexing applications without external encoder feedback. Ethernet/IP is built in, so the drive connects directly to a PLC or motion controller over standard industrial Ethernet — no fieldbus gateway needed. The RS485 port supports Modbus RTU at 9.6, 19.2, and 38.4 kbaud for legacy daisy-chain setups. Rotor inertia is 3.5 kg.cm², and the holding brake engages when power is removed, holding the load on a vertical axis without a separate brake resistor. Protection circuits cover safe torque off, output short circuit, and output overload — the drive shuts down before damaging the windings. The 150 m/s² shock rating (1000 shocks per IEC 60068-2-29) means it survives repeated impacts on a moving gantry or conveyor-mounted application without mechanical failure. ## Applications Lexium integrated drives of this class are specified for distributed motion axes in packaging lines, material handling, textile machinery, and assembly stations — anywhere a compact, single-cable stepper solution replaces a traditional motor-plus-drive pair. The holding brake makes it suitable for vertical loads on pick-and-place gantries or conveyor diverters. The ILS2K853PB1F0 is an active Schneider product within the Lexium integrated drive range. No end-of-life notification or last-time-buy date has been issued. Sourcing is through standard distribution channels; confirm lead time on the RFQ. ## Pricing & sourcing The ILS2K853PB1F0 is an active integrated drive normally sourced to order; confirm current lead time and minimum order on the quote.","metaTitle":"Schneider ILS2K853PB1F0 Lexium Integrated Stepper, 24-48V, Ethernet/IP","metaDescription":"Schneider Lexium ILS2K853PB1F0 integrated stepper motor: 6 N.m torque, 24-48 V DC, Ethernet/IP, IP41, 150 m/s² shock rating, holding brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Unclassified"],"specifications":{"Phase":"Single phase","Length":"9.7 in (247.3 mm)","Marking":"CE","Category":"US1PC5618288","Shaft end":"Untapped","Standards":"IEC 61800-3 IEC 61800-3, Ed 2 IEC 60072-1 EN 61800-3:2001, second environment IEC 50178 EN 61800-3 : 2001-02 IEC 50347","Motor Type":"3-phase stepper motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Winding type":"Medium speed of rotation and medium torque","Feedback type":"Index pulse","Gear box type":"Without","Holding brake":"With","Nominal speed":"100 rpm 24 V 200 rpm 48 V","Rotor inertia":"3.5 kg.cm²","Accuracy error":"+/- 6 arc min","Holding torque":"53.1 lbf.in (6 N.m) holding brake 53.1 lbf.in (6 N.m)","Nominal torque":"53.1 lbf.in (6 N.m)","Shaft diameter":"0.6 in (14 mm)","Protection Type":"Safe torque off Short circuit of the output voltage Overload of output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks IEC 60068-2-29","Device short name":"ILS","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"3.3 in (85 mm)","Peak stall torque":"53.1 lbf.in (6 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"125, 250, 500 kbauds","Brake release time":"40 ms","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Brake pull-in power":"22 W","Current consumption":"5000 mA maximum continuous","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55 V","Associated fuse rating":"16 A","Brake application time":"20 ms","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"170 N tensile force) 30 N force pressure)","Number of motor stacks":"3","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet/IP, Integrated","Continuous stall torque":"53.1 lbf.in (6 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"110 N","Mounting holes diameter":"0.3 in (6.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Maximum mechanical speed":"2000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"20000 points/turn","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"3.9 in (99 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,320.00 – $3,070.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d6bab6cdc999d41a07c73e45ef8e3553.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ILS2K853PB1F0/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILS2K853PB1F0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILS2K853PB1F0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}