{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILS2K853TC1F0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILS2K853TC1F0","canonicalUrl":"https://aoctrl.com/schneider/ILS2K853TC1F0","factsUrl":"https://aoctrl.com/api/mcp/products/ILS2K853TC1F0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Lexium integrated drive ILS2K853TC1F0, 3-phase stepper motor, 6 poles, 4.5 Nm torque, Ethernet/IP, RS485 Modbus TCP, 24 V DC, IP41, flange mount, CE.","salesMarkdown":"## Overview The ILS2K853TC1F0 is a Schneider Lexium integrated drive combining a 3-phase stepper motor and drive electronics in one package, order code ILS2K853TC1F0. It delivers 4.5 Nm of holding torque from a 6-pole motor, runs on a 24 V DC supply, and carries an IP41 rating for cabinet-mount applications. On-board Ethernet/IP and RS485 Modbus TCP communication eliminate the need for a separate motion controller in many point-to-point indexing and positioning tasks. The integrated drive accepts step/direction or fieldbus commands and closes the position loop using an index pulse feedback. The 4.5 Nm torque rating defines the maximum holding torque available at standstill; the drive can sustain 200 rpm at 24 V and 400 rpm at 48 V, making it suited for moderate-speed indexing rather than high-speed continuous rotation. Position accuracy is specified at +/- 6 arc minutes, which corresponds to roughly 20000 points per turn resolution — adequate for pick-and-place, labelling, and light assembly axes where sub-degree repeatability is required. The rotor inertia of 3.5 kg.cm² influences acceleration and settling time; a higher-inertia load will require longer move profiles. Protection circuits cover overload, short circuit of the output voltage, and Safe Torque Off, allowing the drive to be integrated into safety-rated stop circuits without an external contactor. ## Applications Lexium integrated drives of this class are specified in packaging machinery, small assembly stations, labelling systems, and medical device handling equipment where a compact motor-drive combination saves panel space and reduces wiring compared to a separate drive and motor. The ILS2K853TC1F0 carries CE marking and is designed to EN/IEC 61800-3 (second environment) and EN/IEC 50178, EN 50347, and IEC 60072-1 standards. No official lifecycle status (active, NRND, or discontinued) is listed in the available documentation; an RFQ is the recommended path to confirm current production status and lead time.","metaTitle":"Schneider ILS2K853TC1F0 Lexium Integrated Stepper Drive, 6 poles, 4.5 Nm","metaDescription":"Schneider Lexium integrated drive ILS2K853TC1F0: 3-phase stepper motor, 6 poles, 4.5 Nm torque, Ethernet/IP, 24 V DC, IP41, CE marked.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Unclassified"],"specifications":{"Phase":"Single phase","Length":"9.7 in (247.3 mm)","Marking":"CE","Category":"18288-LEXIUM INTEGRATED DRIVES II","Shaft end":"Untapped","Standards":"EN/IEC 50178 EN 50347 EN 61800-3:2001, second environment IEC 60072-1 EN 61800-3 : 2001-02 IEC 61800-3, Ed 2 EN/IEC 61800-3","Motor Type":"3-phase stepper motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Index pulse","Gear box type":"Without","Holding brake":"With","Nominal speed":"200 rpm 24 V 400 rpm 48 V","Rotor inertia":"3.5 kg.cm²","Accuracy error":"+/- 6 arc min","Holding torque":"53.1 lbf.in (6 N.m) holding brake 39.8 lbf.in (4.5 N.m)","Nominal torque":"39.8 lbf.in (4.5 N.m)","Shaft diameter":"0.6 in (14 mm)","Protection Type":"Overload of output voltage Short circuit of the output voltage Safe torque off","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILS","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"3.3 in (85 mm)","Peak stall torque":"39.8 lbf.in (4.5 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"125, 250, 500 kbauds","Brake release time":"40 ms","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Brake pull-in power":"22 W","Current consumption":"6000 mA maximum continuous","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55 V","Associated fuse rating":"16 A","Brake application time":"20 ms","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"170 N tensile force) 30 N force pressure)","Number of motor stacks":"3","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet/IP, Integrated","Continuous stall torque":"39.8 lbf.in (4.5 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"110 N","Mounting holes diameter":"0.3 in (6.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Maximum mechanical speed":"3000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"20000 points/turn","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"3.9 in (99 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,485.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1648d1e9648964867ba17c2d26fda83b.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ILS2K853TC1F0/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILS2K853TC1F0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILS2K853TC1F0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}