{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"ILS2P853TC1A0","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"ILS2P853TC1A0","canonicalUrl":"https://aoctrl.com/schneider/ILS2P853TC1A0","factsUrl":"https://aoctrl.com/api/mcp/products/ILS2P853TC1A0","rawCanonicalId":null},"summary":{"shortDescription":"Schneider ILS2P853TC1A0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview It delivers 4.5 N.m (39.8 lbf.in) holding torque on a 6-pole single-phase 24 V DC supply, with IP41 enclosure protection for cabinet-mount applications. Rated shock resistance is 150 m/s² over 1000 shocks per EN/IEC 60068-2-29, and the unit carries CE marking with compliance to EN 61800-3 and EN/IEC 50178. The integrated drive eliminates the separate drive cabinet by embedding the stepper controller and power stage directly on the motor frame. Holding torque of 4.5 N.m determines the load the motor can stop and hold at standstill — sufficient for direct-drive indexing on small rotary tables or belt-driven linear axes without a gearbox. Rotor inertia of 3.3 kg.cm² sets the acceleration capability; lower inertia allows faster start-stop cycles. Feedback is via an index pulse (one pulse per revolution), adequate for open-loop stepper positioning where the drive counts steps from a known home. The RS485 Modbus TCP interface supports 9.6, 19.2, and 38.4 kbaud for parameterization and basic motion commands. Protection includes safe torque off, output short-circuit, and output overload monitoring — the drive shuts down before winding damage occurs. Natural convection cooling keeps the design simple; no fan means no airborne debris ingress in dusty environments. ## Applications This integrated drive stepper motor is specified for point-to-point motion in packaging, labeling, pick-and-place, and small assembly machines where space is tight and a separate drive would complicate the panel layout. The Ethernet Powerlink interface allows synchronization with other drives and controllers on the same network for coordinated multi-axis moves. The ILS2P853TC1A0 carries CE marking and complies with EN 61800-3 (second environment), EN 50347, EN/IEC 61800-3, EN/IEC 50178, IEC 60072-1, and IEC 61800-3 Ed 2. No lifecycle status (active/obsolete) is listed in the available evidence; sourcing is handled via RFQ to confirm current lead time and availability.","metaTitle":"Schneider ILS2P853TC1A0 Lexium Integrated Drive Stepper Motor","metaDescription":"Schneider Lexium ILS2P853TC1A0 integrated drive stepper motor: 4.5 N.m torque, 6 poles, 24 V DC, IP41, Ethernet Powerlink, CE.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Unclassified"],"specifications":{"Phase":"Single phase","Length":"7.9 in (200.6 mm)","Marking":"CE","Category":"18288 - LEXIUM INTEGRATED DRIVES II","Shaft end":"Untapped","Standards":"EN 61800-3:2001, second environment EN 50347 EN 61800-3 : 2001-02 EN/IEC 61800-3 EN/IEC 50178 IEC 60072-1 IEC 61800-3, Ed 2","Motor Type":"3-phase stepper motor","Network type":"DC","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Winding type":"High speed of rotation and medium torque","Feedback type":"Index pulse","Gear box type":"Without","Holding brake":"Without","Nominal speed":"200 rpm 24 V 400 rpm 48 V","Rotor inertia":"3.3 kg.cm²","Accuracy error":"+/- 6 arc min","Holding torque":"39.8 lbf.in (4.5 N.m)","Nominal torque":"39.8 lbf.in (4.5 N.m)","Shaft diameter":"0.6 in (14 mm)","Protection Type":"Safe torque off Short circuit of the output voltage Overload of output voltage","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"Flange","Range of Product":"Lexium integrated drive","Shock resistance":"150 m/s² 1000 shocks EN/IEC 60068-2-29","Device short name":"ILS","Input/output type":"4 signals (each be used as input or output)","Motor flange size":"3.3 in (85 mm)","Peak stall torque":"39.8 lbf.in (4.5 N.m)","Relative humidity":"15...85 % without condensation","Transmission Rate":"100 Mbits","Operating altitude":"<= 3280.84 ft (1000 m) without derating","Current consumption":"6000 mA maximum continuous","Vibration resistance":"20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6","Centring collar depth":"0.08 in (2 mm)","Electrical Connection":"Industrial connector","Nbr. of units in pkg.":"1","Number of motor poles":"6","Service life in hours":"20000 h bearing","Supply voltage limits":"18...55 V","Associated fuse rating":"16 A","Discrete input current":"10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface","Maximum axial force Fa":"170 N tensile force) 30 N force pressure)","Number of motor stacks":"3","Commissioning interface":"RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)","Communication interface":"Ethernet Powerlink, Integrated","Continuous stall torque":"39.8 lbf.in (4.5 N.m)","Discrete output voltage":"23...25 V","IP degree of protection":"IP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5","Maximum radial force Fr":"110 N","Mounting holes diameter":"0.3 in (6.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Maximum mechanical speed":"3000 rpm","Number of mounting holes":"4","Maximum switching current":"100 mA per output 200 mA total","Product or Component Type":"Motion integrated drive","Speed feedback resolution":"20000 points/turn","[Us] rated supply voltage":"24 V 48 V","Voltage state 0 guaranteed":"-3...4.5 V","Voltage state 1 guaranteed":"15...30 V","Ambient Air Temperature for Storage":"-13...158 °F (-25...70 °C)","Ambient air temperature for operation":"104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)","Circle diameter of the mounting holes":"3.9 in (99 mm)","Permissible ambient air temperature around the device":"221 °F (105 °C) power amplifier 230 °F (110 °C) motor"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,994.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1d60521dfb28c3cdeb2259f01a2fb842.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/ILS2P853TC1A0/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/ILS2P853TC1A0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/ILS2P853TC1A0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}