{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LADN13P","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LADN13P","canonicalUrl":"https://aoctrl.com/schneider/LADN13P","factsUrl":"https://aoctrl.com/api/mcp/products/LADN13P","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Deca LADN13P auxiliary contact block, 1 NO + 3 NC, front mounting, screw clamp terminals, IP20.","salesMarkdown":"It provides instantaneous contact operation for control-circuit feedback, interlocking, or status indication. The screw clamp terminals accept 1 to 2.5 mm² flexible or rigid wire, with a tightening torque of 1.7 N.m using a flat, Philips, or Pozidriv No. 2 screwdriver. Rated operational current (Ie) is 6 A at 120 V AC-15, which covers typical solenoid and contactor coil loads in control circuits. At 690 V AC-15 it drops to 1.04 A — the AC-15 category (IEC 60947-5-1) governs electromagnetic loads, so this is the rating that matters for switching contactor coils, not the higher thermal current. For DC control circuits, it handles 0.55 A at 125 V DC-13 and 0.1 A at 600 V DC-13. The conventional free-air thermal current (Ith) is 10 A at 60 °C, but that's a resistive-load benchmark — don't use it to size for inductive loads. Minimum switching capability is 5 mA at 17 V, so it can handle low-energy PLC-level signals without contact wetting issues. Rated insulation voltage (Ui) is 690 V per IEC 60947-5-1, and 600 V per UL/CSA. IP20 protection means it's suitable for enclosed panel mounting only — no washdown or dust-tight rating. Dimensions are 44 mm wide, 48 mm high, and 42 mm deep — it clips onto the front of a TeSys D or TeSys F contactor without adding DIN-rail width. The front-mount position means it occupies the space above the contactor's main poles, so check clearance above the contactor in the enclosure layout. Operating altitude is rated to 3000 m without derating. Protection against the external GG fuse is specified at 10 A — this is the maximum fuse rating for short-circuit protection on the control circuit feeding this block. Permissible short-time ratings: 100 A for 1 s, 120 A for 500 ms, 140 A for 100 ms at 60 °C, which covers inrush from multiple contactor coils. Making capacity is 140 A AC and 250 A DC per IEC 60947-5-1. Certified to EN/IEC 60947-5-1, GB/T 14048.5, EN 50012, UL 60947-5-1, CSA C22.2 No 60947-5-1, and meets glow-wire requirements of IEC 60335-1 Clause 30.2 and IEC 60335-2-40 Annex JJ for appliance applications. Protective treatment is TH per IEC 60068 for tropical environments. Insulation resistance exceeds 10 MOhm.","metaTitle":"Schneider Electric LADN13P TeSys Deca Auxiliary Contact Bloc","metaDescription":"Schneider Electric LADN13P TeSys Deca auxiliary contact block, 1NO+3NC, front mount, screw clamp terminals. Obsolete — sourced to order against RFQ. IEC/UL/CSA certified.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Motor Control Accessories"],"specifications":{"Depth":"42 mm","Range":"TeSys","Width":"44 mm","Height":"48 mm","Standards":"EN/IEC 60947-5-1 GB/T 14048.5 EN 50012 UL 60947-5-1 CSA C22.2 No 60947-5-1 IEC 60335-1:Clause 30.2 IEC 60335-2-40:Annex JJ UL 60335-2-40:Annex JJ","Product name":"TeSys Deca","Protection type":"GG fuse 10 A","lifecycle_stage":"current","Non-overlap time":"1.5 ms on de-energisation no overlap between NC and NO contact 1.5 ms on energisation no overlap between NC and NO contact","Device short name":"LADN","Mounting location":"Front","Tightening torque":"1.7 N.m - with screwdriver flat Ø 6 mm 1.7 N.m - with screwdriver Philips No 2 1.7 N.m - with screwdriver pozidriv No 2","Contacts operation":"Instantaneous","Operating altitude":"3000 m","Protective treatment":"TH conforming to IEC 60068","Insulation resistance":"> 10 MOhm","Mechanical durability":"30 Mcycles","Connections - terminals":"Screw clamp terminals 1 cable(s) 1...2.5 mm²flexible with cable end Screw clamp terminals 1 cable(s) 1...2.5 mm²flexible without cable end Screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Screw clamp terminals 2 cable(s) 1...2.5 mm²flexible without cable end Screw clamp terminals 1 cable(s) 1...2.5 mm²rigid Screw clamp terminals 2 cable(s) 1...2.5 mm²rigid","IP degree of protection":"IP20 conforming to IEC 60529","Pole contact composition":"1 NO + 3 NC","Minimum switching current":"5 mA","Minimum switching voltage":"17 V","Product or component type":"Auxiliary contact block","Irms rated making capacity":"140 A AC conforming to IEC 60947-5-1 250 A DC conforming to IEC 60947-5-1","Environmental characteristic":"Normal environment","Permissible short-time rating":"100 A 60 °C 1 s 120 A 60 °C 500 ms 140 A 60 °C 100 ms","[Ui] rated insulation voltage":"690 V conforming to IEC 60947-5-1 600 V conforming to UL 60947-5-1 600 V conforming to CSA C22.2 No 60947-5-1","[Ie] rated operational current":"6 A at 120 V AC-15 1.04 A at 690 V AC-15 0.55 A at 125 V DC-13 0.1 A at 600 V DC-13","[Ue] rated operational voltage":"690 V AC 25...400 Hz","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-5...60 °C","[Ith] conventional free air thermal current":"10 A (at 60 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/99c35f4aae632849f0d15d5c6d724a1b.pdf","sourceUrl":"https://www.se.com/nl/en/product/LADN13P/auxiliary-contact-block-tesys-deca-1no+3nc-front-mounting-screw-clamp-terminals-en-50012/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LADN13P/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings I need to check for fit?","answer":"The operational current (Ie) for AC-15 inductive loads is 6 A at 120 V and 1.04 A at 690 V. For DC-13, it's 0.55 A at 125 V and 0.1 A at 600 V. The conventional thermal current (Ith) is 10 A. Minimum switching is 5 mA at 17 V. Mechanical durability is 30 million cycles."},{"question":"What compliance certifications does the LADN13P carry?","answer":"It is certified to IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, EN 50012, and GB/T 14048.5. It also meets glow-wire requirements of IEC 60335-1 and IEC 60335-2-40 Annex JJ."},{"question":"What is the physical size of the LADN13P?","answer":"Width is 44 mm, height is 48 mm, depth is 42 mm. It mounts on the front of a TeSys D or TeSys F contactor."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LADN13P","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LADN13P when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}