{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E06004M5WB","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E06004M5WB","canonicalUrl":"https://aoctrl.com/schneider/LC1E06004M5WB","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E06004M5WB","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control contactor, 4-pole (4 NO), 16 A rated operational current in AC-1, 220 V AC 50 Hz coil, screw clamp terminals, IP20.","salesMarkdown":"It carries a rated operational current of 16 A at up to 440 V in AC-1 utilisation category, with a 220 V AC 50 Hz control coil. The 4 NO pole configuration means all four contacts are normally open, making it a straight fit for switching a resistive load bank or heater circuit where no auxiliary contacts are needed. The AC-1 category per IEC 60947-4-1 means the contacts are rated for making and breaking currents at unity power factor, so the thermal capacity of the contacts governs the rating, not the arc-quenching capability needed for motor starting. For motor loads you would need an AC-3 rated contactor; this part is specified for resistive loads only. The 220 V AC 50 Hz coil is a wide-range AC control circuit, with a pickup range of 0.7 to 1.25 Uc and a dropout range of 0.3 to 0.6 Uc across -5 to 55 °C. That means it reliably pulls in at 154 V and drops out below 132 V, giving a clean margin for brownout conditions on the control transformer. Mounts on either a DIN rail or a plate, with a 45 mm width footprint that fits standard 4-module spacing on a DIN rail. The IP20 finger-safe enclosure is fine for enclosed panels but not for washdown environments. Screw clamp terminals accept 1 to 4 mm² flexible or solid wire on the power circuit, and 1 to 4 mm² on the control circuit — standard for panel wiring with ferrule or direct termination. Certified to EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents. The TH protective treatment per IEC 60068-2-30 means the contactor is treated for tropical humidity environments — useful if the panel ships to a coastal or high-humidity site.","metaTitle":"Schneider Electric LC1E06004M5WB Easy TeSys Contactor, 16A A","metaDescription":"Schneider Electric LC1E06004M5WB Easy TeSys contactor. 4-pole, 16A rated operational current (AC-1), 220V AC 50Hz coil. Current production. Ships from stock.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"80 mm","Range":"Easy TeSys","Width":"45 mm","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Operating time":"12...22 ms on closing 4...19 ms on opening","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Heat dissipation":"2...3 W for control circuit","Mounting support":"Plate DIN rail","Pollution degree":"3","Range of product":"Easy TeSys Control","Average impedance":"2.5 mOhm - Ith 16 A 50 Hz for power circuit","Device short name":"LC1E","Poles description":"4P","Tightening torque":"Power circuit: 1.2 N.m Control circuit: 1.2 N.m","Inrush power in VA":"95 VA 50 Hz cos phi 0.75 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 50 Hz wide range","Overvoltage category":"III","Protective treatment":"TH conforming to IEC 60068-2-30","Utilisation category":"AC-1","Contactor application":"Resistive load","Electrical durability":"150000 cycles AC-1","Mechanical durability":"10000000 cycles","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms)","Associated fuse rating":"12 A gG at <= 690 V coordination type 1 for power circuit","Maximum operating rate":"1800 cyc/h 60 °C","Connections - terminals":"Power circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 2 1...2.5 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 2 1...2.5 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: solid Power circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: solid Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: solid Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: solid","IP degree of protection":"IP20 conforming to IEC 60529","Rated breaking capacity":"48 A at 440 V for power circuit conforming to IEC 60947","Pole contact composition":"4 NO","Product or component type":"Contactor","Irms rated making capacity":"60 A at 440 V AC for power circuit conforming to IEC 60947-4-1","Power dissipation per pole":"1 W AC-1","[Uc] control circuit voltage":"220 V AC 50 Hz","Auxiliary contact composition":"Without","[Ui] rated insulation voltage":"690 V conforming to IEC 60947-4-1","Control circuit voltage limits":"0.3...0.6 Uc (-5...55 °C):drop-out 50 Hz 0.7...1.25 Uc (-5...55 °C):operational 50 Hz","[Ie] rated operational current":"16 A (at <55 °C) at <= 440 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: <= 690 V AC 50/60 Hz","Hold-in power consumption in VA":"8.3 VA 50 Hz cos phi 0.3 (at 20 °C)","[Uimp] rated impulse withstand voltage":"6 kV conforming to IEC 60947","[Icw] rated short-time withstand current":"80 A 40 °C - 10 s for power circuit 45 A 40 °C - 60 s for power circuit 20 A 40 °C - 600 s for power circuit","[Ith] conventional free air thermal current":"16 A (at 55 °C) for power circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/595b382aa2eff350d6c5166a2c16d760.pdf","sourceUrl":"https://www.se.com/in/en/product/LC1E06004M5WB/easy-tesys-contactor-4p-ctr-16a-ac14no220v-50hz-wb/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E06004M5WB/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"Rated operational current is 16 A in AC-1 at up to 440 V, with a 220 V AC 50 Hz control coil. It is a 4-pole contactor with 4 NO contacts, rated insulation voltage of 690 V, and mechanical durability of 10 million cycles."},{"question":"What is the mounting footprint?","answer":"Width is 45 mm, depth 80 mm, height 74 mm. It mounts on DIN rail or plate, fitting a standard 4-module DIN rail slot."},{"question":"What compliance standards does it meet?","answer":"Certified to EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T 14048 series. It also carries TH protective treatment per IEC 60068-2-30 for tropical environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E06004M5WB","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E06004M5WB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}