{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E0910B6","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E0910B6","canonicalUrl":"https://aoctrl.com/schneider/LC1E0910B6","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E0910B6","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control LC1E0910B6, obsolete 3-pole contactor, 9 A AC-3/AC-3e at ≤440 V, 24 V AC 60 Hz coil, 1 NO auxiliary contact, plate/DIN-rail mount.","salesMarkdown":"The Schneider Electric LC1E0910B6 is a 3-pole contactor from the Easy TeSys Control range, rated for 9 A in AC-3 and AC-3e utilisation categories at up to 440 V, with a 24 V AC 60 Hz coil and one normally open auxiliary contact. It's built for motor control and resistive load switching in control panels, mounting to either a plate or a DIN rail. The 9 A AC-3 rating is the motor-switching current at 440 V — the figure that decides whether this contactor handles your motor load. AC-3 covers starting and stopping of squirrel-cage motors, where the contacts close on inrush and break the running current. The same contactor also carries an AC-1 rating for resistive loads, so it can switch heaters or lighting banks at a higher current (the exact AC-1 value is not listed here, but the utilisation category is confirmed). The 24 V AC coil at 60 Hz is a fixed-frequency coil — if your panel runs 50 Hz, the coil impedance changes and the pickup/dropout voltages shift. The part is specified for 60 Hz only, so verify coil compatibility before dropping it into a 50 Hz circuit. The non-overlap time of 1.5 ms on both energisation and de-energisation, guaranteed between NC and NO contacts, means the contactor breaks before make — critical for interlocking circuits where you cannot allow momentary shorting across power legs. Mounting is straightforward: 45 mm width on a DIN rail or plate, with an operating altitude of 3000 m without derating. The IP2X finger protection means it's safe for open-panel mounting where accidental contact is possible, but not for washdown environments. ## Lifecycle Reality — This Part Is Obsolete The LC1E0910B6 is marked obsolete by Schneider Electric. There is no official successor order code listed in the available records, so a direct drop-in replacement from the same brand is not confirmed. The contactor carries compliance with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the corresponding GB/T standards for the Chinese market. It also meets EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for appliance applications. Fire resistance is tested to 850 °C per IEC 60695-2-1. Protective treatment is TH (pollution degree 3) per IEC 60068-2-30, suitable for humid environments.","metaTitle":"Schneider LC1E0910B6 Easy TeSys Contactor, 9A AC-3, 24V AC C","metaDescription":"Obsolete Schneider LC1E0910B6 Easy TeSys Control contactor, 3P, 9A AC-3/AC-3e at 440V, 24V AC 60Hz coil, 1NO aux. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"80 mm","Range":"Easy TeSys","Width":"45 mm","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"3P","Operating altitude":"3000 m without derating","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068-2-30","Utilisation category":"AC-3 AC-3e AC-1","Contactor application":"Motor control Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ac5b81e49e08c0ebf34bbd7456fbc0bc.pdf","sourceUrl":"https://www.se.com/vn/en/product/LC1E0910B6/contactoreasy-tesys-controllc1e3p3noac3-ac3e440v9a24v-ac-coil60hz1no-auxiliary-contact/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E0910B6/alternatives.json"},"ai":{"faq":[{"question":"What are the key dimensions for panel layout?","answer":"The LC1E0910B6 measures 45 mm wide, 74 mm high, and 80 mm deep. It mounts on a DIN rail or directly to a plate."},{"question":"What compliance documentation does Schneider provide for this part?","answer":"The contactor is certified to EN/IEC 60947-1, -4-1, -5-1, and the corresponding GB/T standards. It also meets EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for appliance use. Fire resistance is rated at 850 °C per IEC 60695-2-1, and protective treatment is TH (pollution degree 3) per IEC 60068-2-30."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E0910B6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E0910B6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}