{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E12008Q7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E12008Q7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E12008Q7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E12008Q7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E12008Q7IN, 4P (2NO+2NC) contactor, AC-1 32A at ≤415V, 380V coil.","salesMarkdown":"It's rated for AC-1 utilisation category at 32 A with a maximum operational voltage of 415 V, and carries a 380 V coil. This puts it squarely in resistive-load switching — heaters, lighting banks, non-inductive elements — not motor starting. It's built to EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents, so it was designed for global panel builds where those standards are the baseline. Mounts on DIN rail or plate. IP2X finger protection — fine inside a locked cabinet, not for open-panel washdown areas. Rated for operation up to 3000 m altitude and ambient temps from -20 to 70 °C at the coil, with storage down to -60 °C. The AC-1 rating of 32 A is the continuous resistive current the main poles can carry and break. If you're switching motor loads (AC-3), this contactor is not the right tool — the make-and-break on inductive inrush would exceed its design. Stick to resistive or slightly inductive loads like power-factor correction capacitor banks (with appropriate derating). Mechanical robustness is specified: 1.5 Gn vibration tolerance with contacts closed, 3 Gn when open; shock rated to 10 Gn closed, 7 Gn open. That's enough for most industrial panel environments but not for direct mounting on a high-vibration machine frame without additional damping.","metaTitle":"Schneider LC1E12008Q7IN Easy TeSys Contactor, 32A, 4P","metaDescription":"Obsolete Schneider LC1E12008Q7IN Easy TeSys Control contactor. 4P (2NO+2NC), AC-1 rated 32A at ≤415V. Sourced to order against RFQ. Standards EN/IEC 60947.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"80 mm","Range":"Easy TeSys","Width":"45 mm","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"DIN rail Plate","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a96fada2cc8ca689c084cb95fb937e28.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E12008Q7IN/contactoreasy-tesys-controllc1e4p2no+2ncac1415v32a380v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E12008Q7IN/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"4-pole (2NO+2NC), AC-1 utilisation category rated 32 A at ≤415 V, with a 380 V coil. Standards: EN/IEC 60947-1, 60947-4-1, 60947-5-1."},{"question":"What is the physical size of the LC1E12008Q7IN?","answer":"Width 45 mm, height 74 mm, depth 80 mm. Mounts on DIN rail or plate."},{"question":"What compliance documentation exists for this part?","answer":"It meets EN/IEC 60947-1, 60947-4-1, 60947-5-1 and Chinese GB/T 14048.1, 14048.4, 14048.5. Fire resistance tested to 850 °C per IEC 60695-2-1. Protective treatment TH (pollution degree 3) per IEC 60068."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E12008Q7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E12008Q7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}