{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E1201F7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E1201F7","canonicalUrl":"https://aoctrl.com/schneider/LC1E1201F7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E1201F7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control LC1E1201F7, 3-pole contactor, 12 A AC-3/AC-3e at ≤440 V, 110 V AC coil 50/60 Hz, 1 NC auxiliary contact.","salesMarkdown":"It carries a 12 A rating in AC-3 and AC-3e utilisation categories at ≤440 V, which means it is sized for switching three-phase induction motors up to that current — the AC-3 category specifically covers starting and stopping squirrel-cage motors under full load. The 110 V AC coil operates on 50/60 Hz supplies, a common control voltage in industrial panels worldwide. This timing is critical when the contactor is used in safety circuits or reversing starters where a break-before-make sequence must be enforced to prevent phase-to-phase shorts. ## Standards, approvals, and environmental tolerance Protective treatment TH conforming to IEC 60068-2-30 means it is tested for damp heat, cyclic — suitable for non-condensing humid environments typical of many industrial sites. IP2X finger protection per IEC 60529 covers the front of the device — adequate for enclosed panels where accidental contact is prevented by the enclosure door. Mechanical robustness is specified for vibration: 1.5 Gn (5–300 Hz) with contacts open, 3 Gn with contacts closed. Shock resistance is 7 Gn for 11 ms open, 10 Gn for 11 ms closed. These figures confirm the contactor holds its state under moderate machine vibration — relevant when mounted on a panel attached to a running conveyor or compressor skid.","metaTitle":"Schneider LC1E1201F7 Easy TeSys Contactor, 12A AC-3, 110V AC","metaDescription":"Schneider Electric Easy TeSys Control LC1E1201F7 contactor. 3-pole, 12A AC-3/AC-3e at ≤440V, 110V AC 50/60Hz coil, 1NC aux. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"80 mm","Range":"Easy TeSys","Width":"45 mm","title":"LC1E1201F7","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ","description":"Contactor,Easy TeSys Control,LC1E,3P(3NO),AC-3/AC-3e,<=440V,12A,110V AC coil,50/60Hz,1NC auxiliary contact","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"DIN rail Plate","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"3P","Operating altitude":"3000 m without derating","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068-2-30","Utilisation category":"AC-3 AC-3e AC-1","Contactor application":"Motor control Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4cf7d868f021254ec6ca264e8da51882.pdf","sourceUrl":"https://www.se.com/hk/en/product/LC1E1201F7/contactoreasy-tesys-controllc1e3p3noac3-ac3e440v12a110v-ac-coil50-60hz1nc-auxiliary-contact/"},"ai":{"faq":[{"question":"What utilisation categories does this contactor support?","answer":"It is rated for AC-3 (squirrel-cage motor starting/stopping), AC-3e (enhanced AC-3 for energy-efficient motors), and AC-1 (resistive loads). The AC-3/AC-3e rating at 12 A and ≤440 V is the primary motor-switching spec; AC-1 carries a higher current rating for resistive loads like heaters."},{"question":"What is the coil voltage and frequency?","answer":"The coil is 110 V AC, 50/60 Hz. This is a common control voltage in North American and many international panels. Ensure the control transformer or supply matches this voltage; the contactor will not pull in reliably below about 85% of rated voltage."},{"question":"Does this contactor include an auxiliary contact block?","answer":"It comes with one built-in normally-closed (NC) auxiliary contact. The non-overlap time between NC and NO contacts is guaranteed at 1.5 ms on both energisation and de-energisation, which is important for interlocking in reversing or safety circuits."},{"question":"What compliance documentation is available for the LC1E1201F7?","answer":"The contactor is certified to EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus GB/T 14048.1/4/5 for China. It also meets EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for household/HVAC appliance safety. Fire resistance is tested to 850 °C per IEC 60695-2-1. RoHS and REACH declarations are standard from Schneider Electric for this series."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E1201F7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E1201F7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}