{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E1210BD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E1210BD","canonicalUrl":"https://aoctrl.com/schneider/LC1E1210BD","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E1210BD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E1210BD, 3P(3NO) contactor, AC-3/AC-3e ≤440V 12A, 24V DC coil, 1 NO auxiliary contact.","salesMarkdown":"The LC1E1210BD is a 3-pole contactor from Schneider Electric's Easy TeSys Control range, rated 12 A in AC-3 (motor) and AC-3e duty at up to 440 V, with a 24 V DC coil and one normally open auxiliary contact built in. That AC-3 rating — 12 A — is the number that governs motor switching: it tells you this contactor can handle a standard three-phase induction motor drawing up to 12 A during starting and running, which typically corresponds to a motor around 5.5 kW at 400 V. The 24 V DC coil means it's intended for control circuits running on low-voltage DC, common in PLC-driven panels or safety circuits where you want to keep the control voltage away from line power. At 45 mm wide, 77 mm tall, and 93 mm deep, it fits a typical 8-module wide DIN-rail footprint — plan your backplane layout accordingly. The TH protective treatment per IEC 60068-2-30 means it's tested for damp heat, cyclic; not a guarantee for direct washdown, but it handles the humidity you'd see in a non-condensing panel. Operating temperature range of -5 to 55 °C covers most indoor plant-floor conditions, and it derates gracefully up to 3000 m altitude without needing to knock the current down.","metaTitle":"Schneider Electric LC1E1210BD Easy TeSys Contactor, 12A AC-3","metaDescription":"Active-production LC1E1210BD contactor from Schneider Electric's Easy TeSys Control range. 3-pole, 12A AC-3/AC-3e at ≤440V, 24V DC coil, 1 NO auxiliary. DIN-rail mount, IP20. Sourc","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"93 mm","Range":"Easy TeSys","Width":"45 mm","title":"LC1E1210BD","Height":"77 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","description":"Contactor,Easy TeSys Control,LC1E,3P(3NO),AC-3/AC-3e,<=440V,12A,24V DC coil,1 NO auxiliary contact","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"3P","Operating altitude":"3000 m without derating","Protective treatment":"TH conforming to IEC 60068-2-30 test Db","Utilisation category":"AC-3 AC-3e AC-1","Contactor application":"Motor control Resistive load","Mechanical robustness":"Shocks contactor open (5 Gn for 11 ms) conforming to IEC 60068-2-7 Shocks contactor closed (10 Gn for 11 ms) conforming to IEC 60068-2-7 Vibrations contactor open (1.5 Gn, 5...300 Hz) conforming to IEC 60068-2-6 Vibrations contactor closed (3 Gn, 5...300 Hz) conforming to IEC 60068-2-6","IP degree of protection":"IP20 conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for signalling circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/85e55dd74a9a7d65ca6424ef1200e3ee.pdf","sourceUrl":"https://www.se.com/mk/en/product/LC1E1210BD/contactoreasy-tesys-controllc1e3p3noac3-ac3e440v12a24v-dc-coil1-no-auxiliary-contact/"},"ai":{"faq":[{"question":"What is the closest alternative to LC1E1210BD in the same family?","answer":"Within the Easy TeSys Control range, the LC1E1210BD is a 12 A, 24 V DC coil variant with one NO auxiliary. The closest sibling is the LC1E1210B7 (same 12 A AC-3 rating but with a 24 V AC 50/60 Hz coil) — the coil voltage is the only difference. If your control circuit is AC rather than DC, that's the direct swap."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E1210BD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E1210BD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}