{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E150ADCH2S260N","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E150ADCH2S260N","canonicalUrl":"https://aoctrl.com/schneider/LC1E150ADCH2S260N","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E150ADCH2S260N","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control LC1E150ADCH2S260N, 1-pole DC contactor, Ith 150 A, coil 12 VDC.","salesMarkdown":"## DC contactor with 150 A thermal current, 12 VDC coil Coil is 12 V DC (Uc), with operational limits of 0.85 to 1.1 Uc and drop-out between 0.1 and 0.75 Uc. Hold-in power is 7.2 W. This variant is designed for resistive load switching at up to 1000 V DC maximum switching voltage. Ambient operating temperature span is -40 to 85 °C, with no derating up to 4000 m altitude. Rated insulation voltage (Ui) on the power circuit is 1500 V, impulse withstand (Uimp) 8 kV (coil not connected to power circuit). Compliance per IEC 60947-4-1 and GB/T 14048.4. ## Mounting and termination notes Mounts vertically on a support (vertical mounting support is specified). Overall dimensions: 3.2 in deep, 2.3 in wide, 2.9 in tall. Power circuit terminations use M8 bolt with flat and spring washers; tighten to 8–10 N·m (70.8–88.5 lbf·in). Control circuit comes with a 15.7 in (40 cm) two-wire pigtail. The contactor carries IP60 protection — dust-tight but not sealed against water ingress. Single-pole (1P) configuration: main pole is 1 NO, auxiliary contact is also 1 NO. Minimum switching conditions: 0.1 A and 8 V DC. Permissible short-time ratings: 150 A continuous, 170 A for 1000 s, 200 A for 360 s, 300 A for 60 s. On closing, operating time is 50 ms; on opening, 30 ms.","metaTitle":"Schneider Electric LC1E150ADCH2S260N Easy TeSys Contactor, 1","metaDescription":"Schneider Electric LC1E150ADCH2S260N 1-pole DC contactor, 150 A Ith, 12 VDC coil. IEC 60947-4-1. Active production, sourced to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"3.2 in (81.3 mm)","Range":"Easy TeSys","Width":"2.3 in (58 mm)","title":"LC1E150ADCH2S260N","Height":"2.9 in (74.3 mm)","Category":"US10I1222354","Polarity":"No main contact No coil","Standards":"IEC 60947-4-1 GB/T 14048.4","description":"Contactor for charging post,Easy TeSys Control,DC-1 <=1000V 150A,12V DC, single coil,epoxy,external thread,without connector","Operating time":"50 ms on closing 30 ms on opening","lifecycle_stage":"current","Mounting Support":"Vertical support","Range of Product":"Easy TeSys Control","Average impedance":"0.5 mOhm - Ith 150 A","Device short name":"LC1E","Poles description":"1P","Tightening torque":"Power circuit 70.8...88.5 lbf.in (8...10 N.m)","Operating altitude":"13123.36 ft (4000 m) without derating","End Connection Type":"External thread","Control circuit type":"DC","Contactor application":"Resistive load","Electrical durability":"1500 cycles at 750 V, 150 A on resistive load for only breaking, 0.6s open, 5.4s break 1000 cycles at 1000 V, 150 A on resistive load for only breaking, 0.6s open, 5.4s break","Insulation resistance":"1000 MOhm at 1000 V DC","Mechanical durability":"300000 cycles","Mechanical robustness":"Vibrations 5 g, 10...500 Hz) Shocks 20 g for 11 ms)","Nbr. of units in pkg.":"1","Connections - terminals":"Power circuit M8 Bolt Power circuit flat washers Power circuit spring washers Control circuit 2-wire supply 15.7 in (40 cm)","IP degree of protection":"IP60","Pole contact composition":"1 NO","Maximum switching voltage":"1000 V DC","Minimum switching current":"0.1 A","Minimum switching voltage":"8 V for DC","Product or Component Type":"Contactor","[Uc] control circuit voltage":"12 V DC","Auxiliary contact composition":"1 NO","Permissible short-time rating":"150 A for continuous 170 A 1000 s 200 A 360 s 300 A 60 s","[Ui] rated insulation voltage":"1500 V IEC 60947-4-1 power circuit","Control circuit voltage limits":"0.85...1.1 Uc operational 0.1...0.75 Uc drop-out","Hold-in power consumption in W":"7.2 W","Ambient air temperature for operation":"-40...185 °F (-40...85 °C) operation -40...185 °F (-40...85 °C) storage","[Uimp] rated impulse withstand voltage":"8 kV coil not connected to the power circuit IEC 60947","[Ith] conventional free air thermal current":"150 A for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$325.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3492600cb8d158fad15dede0ed1e3852.pdf","sourceUrl":"https://www.se.com/us/en/product/LC1E150ADCH2S260N/contactor-for-charging-posteasy-tesys-controldc1-1000v-150a12v-dc-single-coilepoxyexternal-threadwithout-connector/"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"The LC1E150ADCH2S260N is a 1-pole DC contactor rated for 150 A conventional free-air thermal current (Ith), with a 12 V DC coil and maximum switching voltage of 1000 V DC. Power circuit insulation voltage is 1500 V, impulse withstand 8 kV. Ambient operating temperature -40 to 85°C."},{"question":"What are the mounting dimensions of the LC1E150ADCH2S260N?","answer":"Depth is 3.2 in (81.3 mm), width 2.3 in (58 mm), height 2.9 in (74.3 mm). It mounts vertically with M8 bolt terminations on the power circuit."},{"question":"What compliance standards does this contactor meet?","answer":"It complies with IEC 60947-4-1 and GB/T 14048.4. Rated impulse withstand voltage is 8 kV (coil not connected to power circuit) and insulation resistance is 1000 MOhm at 1000 V DC."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E150ADCH2S260N","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E150ADCH2S260N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}