{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E150ASCH2S260N","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E150ASCH2S260N","canonicalUrl":"https://aoctrl.com/schneider/LC1E150ASCH2S260N","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E150ASCH2S260N","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, Easy TeSys Control, DC contactor, 1-pole, LC1E150ASCH2S260N, 150 A continuous, 1000 V DC switching, 12 V DC coil, IP60.","salesMarkdown":"## DC furnace contactor, built for resistive loads The coil pulls in at 12 V DC with a 30 ms closing time and holds at 3.5 W. That closing time and contact composition (1 NO main, 1 NO auxiliary) suit direct on-off control of heating elements, not soft-start or switching inductive loads like motors. Mounts vertically on a flat surface (no DIN rail). Power terminals accept M8 bolts with flat and spring washers; torque to 8–10 N·m. The control circuit is delivered as two wires, 40 cm length, pre-stripped for a DC supply. Overall depth of 81.3 mm and width of 66.5 mm keep it compact for a 150 A contactor.","metaTitle":"Schneider Electric LC1E150ASCH2S260N Easy TeSys Contactor, 1","metaDescription":"Schneider Electric LC1E150ASCH2S260N Easy TeSys 1-pole DC contactor. Rated 150 A continuous, switching up to 1000 V DC. IP60, -40 to 85°C. Active production. For resistive load fur","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"3.2 in (81.3 mm)","Range":"Easy TeSys","Width":"2.6 in (66.5 mm)","Height":"2.9 in (74.3 mm)","Category":"US10I1222354","Polarity":"No main contact Yes coil","Standards":"IEC 60947-4-1 GB/T 14048.4","Operating time":"30 ms on closing 15 ms on opening","lifecycle_stage":"current","Mounting Support":"Vertical support","Range of Product":"Easy TeSys Control","Average impedance":"0.5 mOhm - Ith 150 A","Device short name":"LC1E","Inrush power in W":"32 W","Poles description":"1P","Tightening torque":"Power circuit 70.8...88.5 lbf.in (8...10 N.m)","Operating altitude":"13123.36 ft (4000 m) without derating","End Connection Type":"External thread","Control circuit type":"DC","Contactor application":"Resistive load","Electrical durability":"1500 cycles at 750 V, 150 A on resistive load for only breaking, 0.6s open, 5.4s break 1000 cycles at 1000 V, 150 A on resistive load for only breaking, 0.6s open, 5.4s break","Insulation resistance":"1000 MOhm at 1000 V DC","Mechanical durability":"300000 cycles","Mechanical robustness":"Vibrations 5 g, 10...500 Hz) Shocks 20 g for 11 ms)","Nbr. of units in pkg.":"1","Connections - terminals":"Power circuit M8 Bolt Power circuit flat washers Power circuit spring washers Control circuit 2-wire supply 15.7 in (40 cm)","IP degree of protection":"IP60","Pole contact composition":"1 NO","Maximum switching voltage":"1000 V DC","Minimum switching current":"0.1 A","Minimum switching voltage":"8 V for DC","Product or Component Type":"Contactor","[Uc] control circuit voltage":"12 V DC","Auxiliary contact composition":"1 NO","Permissible short-time rating":"150 A for continuous 225 A 60 min 300 A 20 min 600 A 30 s 1500 A 0.6 s","[Ui] rated insulation voltage":"1500 V IEC 60947-4-1 power circuit","Control circuit voltage limits":"0.85...1.1 Uc operational 0.1...0.75 Uc drop-out","Hold-in power consumption in W":"3.5 W","Ambient air temperature for operation":"-40...185 °F (-40...85 °C) operation -40...185 °F (-40...85 °C) storage","[Uimp] rated impulse withstand voltage":"8 kV coil not connected to the power circuit IEC 60947","[Ith] conventional free air thermal current":"150 A for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$325.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/79e5ee27797b3123c1c9d7ec9ccaa9b7.pdf","sourceUrl":"https://www.se.com/us/en/product/LC1E150ASCH2S260N/contactor-for-charging-posteasy-tesys-controldc1-1000v-150a12v-dc-double-coilsepoxyexternal-threadwithout-connector/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E150ASCH2S260N/alternatives.json"},"ai":{"faq":[{"question":"What is the depth of the LC1E150ASCH2S260N?","answer":"The depth is 3.2 inches (81.3 mm). Overall dimensions: width 2.6 in (66.5 mm), height 2.9 in (74.3 mm)."},{"question":"What range does the LC1E150ASCH2S260N belong to?","answer":"It falls under the Easy TeSys Control range from Schneider Electric."},{"question":"What switching voltage and current can this contactor handle for DC resistive loads?","answer":"Maximum switching voltage is 1000 V DC. Rated continuous current is 150 A for resistive loads, with short-term overloads as detailed in the spec (e.g., 225 A for 60 minutes)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E150ASCH2S260N","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E150ASCH2S260N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}