{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E18008P7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E18008P7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E18008P7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E18008P7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E, 4P (2NO+2NC), AC-1 ≤415V 40A, 230V coil.","salesMarkdown":"It is rated for AC-1 utilisation category at 40 A up to 415 V, with a 230 V coil. This makes it suited for switching resistive loads in control panels where the contactor's main job is to close and open power circuits under normal load conditions, not motor inrush. The AC-1 rating is 40 A at ≤415 V for resistive loads. For motor loads (AC-3), this contactor is not rated. The 4-pole configuration with 2NO+2NC gives flexibility for switching multiple circuits or implementing interlocking. That covers the general rules, contactor-specific performance, and control-circuit device requirements. Because there is no official replacement part number, a cross-reference to a current Easy TeSys or TeSys Deca contactor would need to be validated against the original application's coil voltage (230 V), pole count (4P), contact configuration (2NO+2NC), and AC-1 current rating (40 A). That is a form-fit-function check the buyer must run against their own panel layout and load specs. The depth of 80 mm means it will clear most 100 mm deep enclosures, but check your panel's internal clearance if you are retrofitting into a shallow box.","metaTitle":"Schneider Electric LC1E18008P7IN Easy TeSys Contactor, 4P, 4","metaDescription":"Obsolete Schneider Electric LC1E18008P7IN Easy TeSys contactor, 4P (2NO+2NC), AC-1 40A at ≤415V, 230V coil. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"80 mm","Range":"Easy TeSys","Width":"45 mm","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"DIN rail Plate","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0b18bc65e68718e2e4941f443b766013.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E18008P7IN/contactoreasy-tesys-controllc1e4p2no+2ncac1415v40a230v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E18008P7IN/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to the LC1E18008P7IN?","answer":"No official successor order code is provided in the available records. A replacement would need to match the 4-pole (2NO+2NC) configuration, 230 V coil, and AC-1 40 A rating at ≤415 V. A current Easy TeSys or TeSys Deca contactor with those specs would be the starting point for a cross-reference check."},{"question":"What are the key specifications of the LC1E18008P7IN?","answer":"It is a 4-pole contactor (2NO+2NC) rated AC-1 at 40 A up to 415 V, with a 230 V coil. It mounts on DIN rail, measures 45 x 74 x 80 mm, and complies with EN/IEC 60947 series standards."},{"question":"What compliance documentation is available for the LC1E18008P7IN?","answer":"The contactor is certified to EN/IEC 60947-1, -4-1, and -5-1, plus GB/T 14048.1, -4, and -5. It also meets IEC 60695-2-1 for fire resistance at 850 °C and IEC 60068 for TH protective treatment (pollution degree 3)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E18008P7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E18008P7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}