{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E18008Q7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E18008Q7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E18008Q7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E18008Q7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E18008Q7IN, 4P (2NO+2NC) contactor, AC-1 40A at ≤415V, 380V coil.","salesMarkdown":"Its AC-1 utilisation category rates it for 40 A at ≤415 V, making it suited for resistive load switching in control panels. The 380 V coil matches standard three-phase line voltages in many industrial installations. This part is marked obsolete by the manufacturer. No official successor order code is listed, so any replacement would need to be qualified against the customer's approved manufacturer list (AML) before substitution. The contactor carries compliance with EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents — covering the main standard for low-voltage switchgear and controlgear, the specific contactor standard, and control circuit devices. Fire resistance is tested to 850 °C per IEC 60695-2-1. The protective treatment (TH) meets pollution degree 3 per IEC 60068, so it handles typical industrial atmospheres without derating. The IP2X degree of protection means the contactor body is finger-safe but not sealed against moisture; install inside a panel with at least IP54 enclosure for washdown or outdoor areas. Operating altitude is rated to 3000 m without derating. The AC-1 rating of 40 A at ≤415 V is the resistive load current — this is the current the contactor can make and break for heaters, lighting, or resistive banks. For motor loads (AC-3), the rating would be lower; no AC-3 figure is listed, so this part is not suited for motor switching.","metaTitle":"Schneider Electric LC1E18008Q7IN Easy TeSys Contactor, 4P, 4","metaDescription":"Schneider Electric LC1E18008Q7IN Easy TeSys Control contactor, 4P (2NO+2NC), AC-1 rated 40A at ≤415V, 380V coil. Obsolete — sourced to order against RFQ. EN/IEC 60947 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"80 mm","Range":"Easy TeSys","Width":"45 mm","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (7 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a66e747c16312ede9ae8b9efe59f6804.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E18008Q7IN/contactoreasy-tesys-controllc1e4p2no+2ncac1415v40a380v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E18008Q7IN/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"AC-1 rated 40 A at ≤415 V for resistive loads, with a 380 V coil. It is a 4-pole contactor configured 2NO+2NC."},{"question":"How is this contactor mounted?","answer":"It mounts on a plate or DIN rail. The 45 mm width fits standard enclosure rail spacing, and the IP2X body is finger-safe for panel installation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E18008Q7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E18008Q7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}