{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E20BDAT1S260N","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E20BDAT1S260N","canonicalUrl":"https://aoctrl.com/schneider/LC1E20BDAT1S260N","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E20BDAT1S260N","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control LC1E20BDAT1S260N DC contactor, 1-pole 1 NO, 20 A Ith, 1500 V DC switching, 24 V DC coil, IP60, ceramic arc chamber.","salesMarkdown":"## Switching life and electrical endurance The LC1E20BDAT1S260N: Electrical endurance is specified for DC-1 resistive breaking: 2000 cycles at 750 V / 20 A, 1500 cycles at 1000 V / 20 A, and 1000 cycles at 1500 V / 20 A, with a 0.6 s open time and 5.4 s break interval. Mechanical durability is rated at 300,000 cycles. The ceramic arc chamber handles the DC arc without external blowout magnets — the arc is forced into the ceramic grid where it splits and extinguishes. This is the same arc-management approach used in higher-current DC contactors, scaled for the 20 A / 1500 V envelope. Mounts vertically on a flat panel — the dimensions are 1.5 in (37 mm) wide, 1.9 in (47 mm) high, and 2.6 in (67 mm) deep. The power circuit terminals accept M4 nuts with flat and spring washers; torque to 22.1–31.0 lbf·in (2.5–3.5 N·m). Operating ambient temperature spans -40 to 185 °F (-40 to 85 °C), with no derating up to 4000 m altitude. Designed and tested to IEC 60947-4-1 and GB/T 14048.4 for contactors and motor-starters. Insulation resistance measures 1000 MΩ at 1000 V DC. The contactor withstands 5 g vibration from 10 to 500 Hz and 20 g shock for 11 ms — figures that cover the mechanical environment inside an EV charging station cabinet or industrial control panel.","metaTitle":"Schneider Electric LC1E20BDAT1S260N Easy TeSys DC Contactor","metaDescription":"Schneider Electric LC1E20BDAT1S260N Easy TeSys DC contactor, 20A thermal current (Ith), 1500V DC switching, 24V DC coil. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"2.6 in (67 mm)","Range":"Easy TeSys","Width":"1.5 in (37 mm)","title":"LC1E20BDAT1S260N","Height":"1.9 in (47 mm)","Category":"US10I1122387","Polarity":"No main contact No coil","Standards":"IEC 60947-4-1 GB/T 14048.4","description":"Contactor for charging post,Easy TeSys Control,DC-1 <=1500V 20A,24V DC,single coil,ceramics,internal thread,without connector","Operating time":"30 ms on closing 15 ms on opening","lifecycle_stage":"current","Mounting Support":"Vertical support","Range of Product":"Easy TeSys Control","Average impedance":"5 mOhm - Ith 20 A","Device short name":"LC1E","Poles description":"1P","Tightening torque":"Power circuit 22.1...31.0 lbf.in (2.5...3.5 N.m)","Operating altitude":"13123.36 ft (4000 m) without derating","End Connection Type":"Internal Thread","Control circuit type":"DC","Contactor application":"Resistive load","Electrical durability":"2000 cycles at 750 V, 20 A on resistive load for only breaking, 0.6s open, 5.4s break 1500 cycles at 1000 V, 20 A on resistive load for only breaking, 0.6s open, 5.4s break 1000 cycles at 1500 V, 20 A on resistive load for only breaking, 0.6s open, 5.4s break","Insulation resistance":"1000 MOhm at 1000 V DC","Mechanical durability":"300000 cycles","Mechanical robustness":"Vibrations 5 g, 10...500 Hz) Shocks 20 g for 11 ms)","Nbr. of units in pkg.":"1","Connections - terminals":"Power circuit M4 nut Power circuit flat washers Power circuit spring washers Control circuit 2-wire supply 11.8 in (30 cm)","IP degree of protection":"IP60","Pole contact composition":"1 NO","Maximum switching voltage":"1500 V DC","Product or Component Type":"Contactor","[Uc] control circuit voltage":"24 V DC","Auxiliary contact composition":"Without","Permissible short-time rating":"20 A for continuous 75 A 10 min 400 A 2 s","[Ui] rated insulation voltage":"1500 V IEC 60947-4-1 power circuit","Control circuit voltage limits":"0.85...1.1 Uc operational 0.1...0.75 Uc drop-out","Hold-in power consumption in W":"2.6 W","Ambient air temperature for operation":"-40...185 °F (-40...85 °C) operation -40...185 °F (-40...85 °C) storage","[Uimp] rated impulse withstand voltage":"6 kV coil not connected to the power circuit IEC 60947","[Ith] conventional free air thermal current":"20 A for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$140.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d5b8ce55fd942cf058671032d2227d55.pdf","sourceUrl":"https://www.se.com/us/en/product/LC1E20BDAT1S260N/contactor-for-charging-posteasy-tesys-controldc1-1500v-20a24v-dcsingle-coilceramicsinternal-threadwithout-connector/"},"ai":{"faq":[{"question":"What compliance documentation is available for the LC1E20BDAT1S260N?","answer":"The contactor is designed to IEC 60947-4-1 and GB/T 14048.4. Standard compliance documentation (declaration of conformity, test reports) is available from the manufacturer or through your sourcing channel."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E20BDAT1S260N","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E20BDAT1S260N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}