{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E25004F7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E25004F7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E25004F7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E25004F7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys contactor, 4P(4 NO), AC-1 ≤415 V 100 A, 110 V AC coil, obsolete.","salesMarkdown":"The Schneider Electric LC1E25004F7IN is a 4-pole (4 NO) Easy TeSys contactor rated for AC-1 resistive loads up to 100 A at 415 V, with a 110 V AC coil. It's built to switch resistive heating elements, lighting banks, or other non-inductive loads in a control panel. If you're filling a BOM for a legacy panel or a line-down repair, this is the exact order code. For new designs, look at the current Easy TeSys or TeSys Deca range for a functional equivalent — but no pin-compatible drop-in is guaranteed without checking the coil voltage and mounting footprint. The AC-1 rating of 100 A at 415 V is the resistive load capacity — it's not for motor starting (AC-3) or inductive switching. If your load is a heater or resistive bank, this contactor handles it cleanly. The 4 NO configuration gives four normally-open power poles, so it's a straight make/break for each phase plus a neutral or spare pole. Coil is 110 V AC, so it's suited for North American or European control voltages where a 110 V control transformer is common. The contactor is certified to EN/IEC 60947-4-1 and GB/T 14048.4, covering contactor and motor-starter standards, plus fire resistance at 850 °C per IEC 60695-2-1. It fits standard DIN-rail enclosures, but check the depth clearance in your panel (93 mm plus wiring space).","metaTitle":"Schneider LC1E25004F7IN Easy TeSys Contactor, 4P 100A AC-1,","metaDescription":"Schneider Electric LC1E25004F7IN Easy TeSys contactor, 4P (4 NO), AC-1 100A at 415V, 110V AC coil. Obsolete — sourced to order against RFQ. DIN rail mount, IP2X.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"93 mm","Range":"Easy TeSys","Width":"56 mm","Height":"64 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/435f3a3fc53cd5cbf3e6db9940537276.pdf","sourceUrl":"https://www.se.com/in/en/product/LC1E25004F7IN/easy-tesys-contactor-4p4-no-ac1-415-v-100a-110-v-ac-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E25004F7IN/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to the LC1E25004F7IN?","answer":"There is no official pin-compatible drop-in replacement listed. For new designs, consider the current Easy TeSys or TeSys Deca range with matching pole count, coil voltage, and AC-1 rating. Verify the mounting footprint and terminal layout before ordering."},{"question":"What are the key ratings of the LC1E25004F7IN?","answer":"It is a 4-pole (4 NO) contactor rated for AC-1 resistive loads up to 100 A at 415 V, with a 110 V AC coil. It mounts on DIN rail, has IP2X protection, and measures 56 x 64 x 93 mm."},{"question":"What compliance documentation is available for this part?","answer":"The contactor is certified to EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T equivalents. It also meets 850 °C fire resistance per IEC 60695-2-1 and has protective treatment TH (pollution degree 3) per IEC 60068."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E25004F7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E25004F7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}