{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E25004M5WB","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E25004M5WB","canonicalUrl":"https://aoctrl.com/schneider/LC1E25004M5WB","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E25004M5WB","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control series, contactor LC1E25004M5WB, 4 NO poles, 40 A AC-1 at ≤440 V, 220 V AC 50 Hz coil, IP20, DIN rail/plate mount.","salesMarkdown":"Its 40 A rated operational current at ≤440 V AC (AC-1) defines the continuous resistive load it can carry — think heater banks, lighting, or other non-inductive circuits where inrush is minimal. The 4 NO pole configuration means all four contacts are normally open, so the contactor bridges the load when the coil pulls in. The control circuit is a 220 V AC 50 Hz wide-range coil, with operational limits of 0.7 to 1.25 Uc and drop-out between 0.3 and 0.6 Uc across -5 to 55 °C. Inrush power at pickup is 95 VA at 50 Hz, cos φ 0.75, so factor that into transformer sizing if the panel runs multiple contactors on one control supply. Depth is 93 mm, height 84 mm — check enclosure depth clearance, especially in shallow gland-plate areas. IP20 finger-safe protection means it belongs inside a locked panel, not exposed to washdown. Power circuit terminals accept 1 to 6 mm² flexible with cable end (or 1.5 to 6 mm² solid), torqued to 1.5 N·m. Control circuit terminals take 1 to 4 mm² flexible without cable end, torqued to 1.2 N·m. The screw-clamp design is standard for panel builders — no special tooling needed. Designed and certified to EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus the Chinese GB/T equivalents. Protective treatment TH per IEC 60068-2-30 means it withstands damp heat, so it can live in non-conditioned plant environments. ## Sourcing reality No last-time-buy or phase-out notice applies. For BOM-line commitment, the 40 A AC-1 rating and 4 NO pole count are the fit-determining specs — confirm your load is resistive and within that current envelope.","metaTitle":"Schneider Electric LC1E25004M5WB Easy TeSys Contactor, 40 A","metaDescription":"Schneider Electric LC1E25004M5WB Easy TeSys contactor, 40 A rated operational current AC-1, 4 NO poles, 220 V AC 50 Hz coil. Current lifecycle stage. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"93 mm","Range":"Easy TeSys","Width":"56 mm","Height":"84 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Operating time":"12...22 ms on closing 4...19 ms on opening","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Heat dissipation":"2...3 W for control circuit","Mounting support":"DIN rail Plate","Pollution degree":"3","Range of product":"Easy TeSys Control","Average impedance":"2.5 mOhm - Ith 40 A 50 Hz for power circuit","Device short name":"LC1E","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 1.5 N.m","Inrush power in VA":"95 VA 50 Hz cos phi 0.75 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 50 Hz wide range","Overvoltage category":"III","Protective treatment":"TH conforming to IEC 60068-2-30 test Db","Utilisation category":"AC-1","Contactor application":"Resistive load","Electrical durability":"350000 cycles AC-1","Mechanical durability":"10000000 cycles","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)","Associated fuse rating":"40 A gG at <= 690 V coordination type 1 for power circuit","Maximum operating rate":"1800 cyc/h 60 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 2 1...2.5 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 1 1...6 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: solid Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: solid Power circuit: screw clamp terminals 1 1.5...6 mm² - cable stiffness: solid Power circuit: screw clamp terminals 2 1.5...6 mm² - cable stiffness: solid","IP degree of protection":"IP20 conforming to IEC 60529","Rated breaking capacity":"200 A at 440 V for power circuit conforming to IEC 60947","Pole contact composition":"4 NO","Product or component type":"Contactor","Irms rated making capacity":"250 A at 440 V AC for power circuit conforming to IEC 60947-4-1","Power dissipation per pole":"3.2 W AC-1","[Uc] control circuit voltage":"220 V AC 50 Hz","Auxiliary contact composition":"Without","[Ui] rated insulation voltage":"690 V conforming to IEC 60947-4-1","Control circuit voltage limits":"0.3...0.6 Uc (-5...55 °C):drop-out 50 Hz 0.7...1.25 Uc (-5...55 °C):operational 50 Hz","[Ie] rated operational current":"40 A (at <55 °C) at <= 440 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: <= 690 V AC 50/60 Hz","Hold-in power consumption in VA":"8.3 VA 50 Hz cos phi 0.3 (at 20 °C)","[Uimp] rated impulse withstand voltage":"6 kV conforming to IEC 60947","[Icw] rated short-time withstand current":"240 A 40 °C - 10 s for power circuit 120 A 40 °C - 60 s for power circuit 50 A 40 °C - 600 s for power circuit","[Ith] conventional free air thermal current":"40 A (at 55 °C) for power circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/632d884204b8d9d745db26638d2be26a.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E25004M5WB/easypact-tvs-contactor-4p-ctr-40a-ac14no220v-50hz-wb/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E25004M5WB/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"Rated operational current is 40 A at ≤440 V AC under utilisation category AC-1 (resistive load). Control circuit voltage is 220 V AC 50 Hz. It has 4 NO poles, rated insulation voltage of 690 V, and mechanical durability of 10 million cycles."},{"question":"What compliance documentation does this contactor carry?","answer":"It is certified to EN/IEC 60947-1, 60947-4-1, and 60947-5-1, plus GB/T 14048.1, 14048.4, and 14048.5. Protective treatment is TH per IEC 60068-2-30, and fire resistance is 850 °C per IEC 60695-2-1."},{"question":"What is the mounting footprint of the LC1E25004M5WB?","answer":"Width is 56 mm (three 18 mm DIN modules), depth is 93 mm, height is 84 mm. It mounts on DIN rail or plate with screw-clamp terminals."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E25004M5WB","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E25004M5WB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}