{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E25008U7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E25008U7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E25008U7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E25008U7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E25008U7IN, 4P (2NO+2NC) contactor, AC-1 50A at ≤415V, 240V coil, DIN rail / plate mount.","salesMarkdown":"It is rated for AC-1 utilisation category at 50 A on a ≤415 V power circuit, with a 240 V coil. This means it is designed for resistive loads — heaters, lighting banks, or other non-inductive circuits — where the switching current and the load current are essentially the same. The 4-pole arrangement gives you two normally-open and two normally-closed power poles, which is useful for applications needing both make and break contacts in the same device, such as changeover or reversing schemes on resistive loads. Mounting is via plate or DIN rail, and the contactor carries IP2X finger protection per IEC 60529, so it is suitable for enclosed panel installation where accidental contact with live parts is prevented. The operating temperature range is -5 to 55 °C, with storage from -60 to 80 °C, and it is rated for operation up to 3000 m altitude without derating. The IEC 60947-4-1 standard specifically covers contactors and motor-starters, so the AC-1 rating and resistive-load application are certified under that framework. ## Integration Notes The IP2X rating means the contactor body itself is finger-safe, but the power terminals still require shrouding or separation from live parts in the enclosure per the standard.","metaTitle":"Schneider LC1E25008U7IN Easy TeSys Contactor, 4P, AC-1 50A,","metaDescription":"Schneider Electric LC1E25008U7IN Easy TeSys Control contactor, 4P (2NO+2NC), AC-1 50A at 415V. Obsolete — sourced to order against RFQ. DIN rail mount, IP2X.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"93 mm","Range":"Easy TeSys","Width":"56 mm","Height":"64 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/50188f287707d576e065a2838a1aec67.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E25008U7IN/contactoreasy-tesys-controllc1e4p2no+2ncac1415v50a240v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E25008U7IN/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings I need to match for a replacement?","answer":"The critical specs are: AC-1 utilisation category at 50 A on a ≤415 V power circuit, 4-pole configuration (2NO+2NC), 240 V coil voltage, and DIN-rail or plate mounting. Any substitute must match these to avoid misapplication on resistive loads."},{"question":"What compliance documentation is available for this contactor?","answer":"The contactor is certified to EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T 14048 series. Fire resistance is tested to 850 °C per IEC 60695-2-1. Protective treatment meets TH (pollution degree 3) per IEC 60068."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E25008U7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E25008U7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}