{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E2501P7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E2501P7","canonicalUrl":"https://aoctrl.com/schneider/LC1E2501P7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E2501P7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E2501P7, 3P(3NO) contactor, AC-3/AC-3e ≤440V 25A, 230V AC coil, 1NC auxiliary contact.","salesMarkdown":"## Part identity and key ratings The LC1E2501P7 is a 3-pole contactor from Schneider Electric's Easy TeSys Control range, rated 25 A in AC-3 and AC-3e utilisation categories at ≤440 V. That AC-3 rating means it's sized for starting and stopping squirrel-cage motors under full load — the standard duty for general-purpose motor control. The coil is 230 V AC, and the built-in auxiliary is 1 NC. It also carries an AC-1 rating for resistive loads, so the same contactor can switch heaters or lighting banks where inrush is minimal. The 3P(3NO) pole configuration gives you three normally-open main poles, which is the typical arrangement for three-phase motor circuits. The 85 mm depth and 74 mm height leave clearance for wiring ducts and adjacent components. IP2X finger protection on the front means it's safe for open-panel installations where accidental contact is a concern. The non-overlap time of 1.5 ms on both energisation and de-energisation is guaranteed between NC and NO contacts — important when you're interlocking a motor starter with a bypass contactor and need to avoid a momentary short across poles during transition. Rated for operation from -5 to 55 °C, storage from -60 to 80 °C, and altitude up to 3000 m without derating. The TH protective treatment (pollution degree 3) per IEC 60068-2-30 means it's treated for tropical humidity environments — relevant if the panel ships to a coastal or high-humidity site.","metaTitle":"Schneider Electric LC1E2501P7 Easy TeSys Contactor, 25A, 3P,","metaDescription":"Active production LC1E2501P7 contactor from Schneider Electric Easy TeSys Control series. 25A AC-3/AC-3e, 3P(3NO), 230V AC coil, 1NC auxiliary. DIN rail mount. EN/IEC 60947 complia","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"85 mm","Range":"Easy TeSys","Width":"45 mm","title":"LC1E2501P7","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ","description":"Contactor,Easy TeSys Control,LC1E,3P(3NO),AC-3/AC-3e,<=440V,25A,230V AC coil,1NC auxiliary contact","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"DIN rail Plate","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"3P","Operating altitude":"3000 m without derating","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068-2-30 test Db","Utilisation category":"AC-3 AC-3e AC-1","Contactor application":"Motor control Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5ade414c996b0c829afd3fdbd7be2639.pdf","sourceUrl":"https://www.se.com/ae/en/product/LC1E2501P7/contactoreasy-tesys-controllc1e3p3noac3-ac3e440v25a230v-ac-coil1nc-auxiliary-contact/"},"ai":{"faq":[{"question":"What compliance documentation does this contactor carry?","answer":"The LC1E2501P7 is certified to EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T 14048.1, 14048.4, and 14048.5. It also references EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ for appliance applications. Fire resistance is tested to 850 °C per IEC 60695-2-1."},{"question":"What is the depth of the LC1E2501P7?","answer":"The depth is 85 mm. Combined with a width of 45 mm and height of 74 mm, it fits standard DIN-rail spacing and leaves room for wiring in a typical control panel."},{"question":"What loads can this contactor switch?","answer":"Rated for AC-3 and AC-3e motor duty at 25 A up to 440 V, and AC-1 resistive load duty. The application is listed as motor control and resistive load. The 3P(3NO) configuration handles three-phase circuits."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E2501P7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E2501P7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}