{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E2501R5","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E2501R5","canonicalUrl":"https://aoctrl.com/schneider/LC1E2501R5","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E2501R5","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E2501R5, 3P contactor, 25 A AC-3/AC-3e at ≤440 V, 440 V AC 50 Hz coil, 1 NC auxiliary contact.","salesMarkdown":"The Schneider Electric LC1E2501R5 is a 3-pole contactor from the Easy TeSys Control range, rated for 25 A in AC-3 and AC-3e utilisation categories at voltages up to 440 V. The 440 V AC 50 Hz coil and single NC auxiliary contact make it a direct-fit replacement in legacy motor-control circuits that were built around this exact coil voltage and frequency. The 25 A AC-3 rating is the motor-switching current: it governs how large an induction motor this contactor can start and stop under full-load conditions. The AC-3e category adds an energy-efficiency variant for modern premium-efficiency motors. The 440 V AC coil means the contactor pulls in reliably on a 440 V line-to-line supply at 50 Hz — common in European and Asian industrial panels. The IP2X finger-protection rating on the contactor body meets basic touch-safety requirements inside an enclosed panel. It also meets GB/T 14048.1, GB/T 14048.4, and GB/T 14048.5 for the Chinese market. The 850 °C glow-wire test per IEC 60695-2-1 confirms flame-retardant behaviour. Full declarations of conformity for these standards are available from the manufacturer's documentation portal.","metaTitle":"Schneider Electric LC1E2501R5 Easy TeSys Contactor, 25A, 440","metaDescription":"Schneider Electric LC1E2501R5 Easy TeSys Control contactor, 3P, 25A AC-3/AC-3e at ≤440V, 440V AC 50Hz coil, 1NC aux. Obsolete — sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"85 mm","Range":"Easy TeSys","Width":"45 mm","Height":"74 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"3P","Operating altitude":"3000 m without derating","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068-2-30 test Db","Utilisation category":"AC-3 AC-3e AC-1","Contactor application":"Motor control Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8defa9ab4b43ace7e75fa1a95e171fa9.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E2501R5/contactoreasy-tesys-controllc1e3p3noac3-ac3e440v25a440v-ac-coil50hz1nc-auxiliary-contact/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E2501R5/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings of the LC1E2501R5?","answer":"It is a 3-pole contactor rated 25 A in AC-3 and AC-3e utilisation categories at ≤440 V, with a 440 V AC 50 Hz coil and one NC auxiliary contact. It mounts on DIN rail or plate and carries IP2X finger protection."},{"question":"What compliance certifications does the LC1E2501R5 carry?","answer":"It is certified to EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the corresponding GB/T standards. It also passes the 850 °C glow-wire test per IEC 60695-2-1 and has TH protective treatment per IEC 60068-2-30 for damp-heat resistance."},{"question":"How do I source the LC1E2501R5 if it is obsolete?","answer":"Since it is no longer in production, we source it through the independent surplus and broker network. Submit an RFQ with your quantity and target lead time, and we will search available inventory for you."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E2501R5","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E2501R5 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}