{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E300PCH2S260N","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E300PCH2S260N","canonicalUrl":"https://aoctrl.com/schneider/LC1E300PCH2S260N","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E300PCH2S260N","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys LC1E300PCH2S260N, a DC-coil contactor rated for 300 A continuous resistive load at up to 1000 V DC.","salesMarkdown":"## Sourcing & Integration The Schneider LC1E300PCH2S260N is a single-pole normally-open contactor built for resistive DC loads. Coil holds at 12...32 V DC with 2.4 W holding power; dropout range 0.1...0.75 Uc ensures reliable release. Switching tested at 1000 V DC, with a minimum of 0.1 A at 8 V DC. Mechanical endurance rated at 300,000 cycles. Mount vertical only as per the support spec.","metaTitle":"Schneider LC1E300PCH2S260N Easy TeSys Contactor, 300 A, DC C","metaDescription":"Active-production Schneider LC1E300PCH2S260N DC-coil contactor rated 300 A at 1000 V DC resistive load. IEC 60947-4-1 compliant. Depth 3.2 in. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"3.2 in (81.3 mm)","Range":"Easy TeSys","Width":"2.6 in (66.5 mm)","title":"LC1E300PCH2S260N","Height":"2.9 in (74.3 mm)","Category":"US10I1222354","Polarity":"No main contact Yes coil","Standards":"IEC 60947-4-1 GB/T 14048.4","description":"Contactor for charging post,Easy TeSys Control,DC-1 <=1000V 300A,12-32V DC,PWM,NO,epoxy,external thread,without connector","Operating time":"30 ms on closing 10 ms on opening","lifecycle_stage":"current","Mounting Support":"Vertical support","Range of Product":"Easy TeSys Control","Average impedance":"0.5 mOhm - Ith 300 A","Device short name":"LC1E","Inrush power in W":"28 W","Poles description":"1P","Tightening torque":"Power circuit 70.8...88.5 lbf.in (8...10 N.m)","Operating altitude":"13123.36 ft (4000 m) without derating","End Connection Type":"External thread","Control circuit type":"DC","Contactor application":"Resistive load","Electrical durability":"1500 cycles at 750 V, 300 A on resistive load for only breaking, 0.6s open, 5.4s break 1000 cycles at 1000 V, 300 A on resistive load for only breaking, 0.6s open, 5.4s break","Insulation resistance":"1000 MOhm at 1000 V DC","Mechanical durability":"300000 cycles","Mechanical robustness":"Vibrations 5 g, 10...500 Hz) Shocks 20 g for 11 ms)","Nbr. of units in pkg.":"1","Connections - terminals":"Power circuit M8 Bolt Power circuit flat washers Power circuit spring washers Control circuit 2-wire supply 15.7 in (40 cm)","IP degree of protection":"IP60","Pole contact composition":"1 NO","Maximum switching voltage":"1000 V DC","Minimum switching current":"0.1 A","Minimum switching voltage":"8 V for DC","Product or Component Type":"Contactor","[Uc] control circuit voltage":"12...32 V DC","Auxiliary contact composition":"1 NO","Permissible short-time rating":"300 A for continuous 400 A 10 min 600 A 5 min 1000 A 30 s","[Ui] rated insulation voltage":"1500 V IEC 60947-4-1 power circuit","Control circuit voltage limits":"0.85...1.1 Uc operational 0.1...0.75 Uc drop-out","Hold-in power consumption in W":"2.4 W","Ambient air temperature for operation":"-40...185 °F (-40...85 °C) operation -40...185 °F (-40...85 °C) storage","[Uimp] rated impulse withstand voltage":"8 kV coil not connected to the power circuit IEC 60947","[Ith] conventional free air thermal current":"300 A for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$550.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/61c416cb3d10f2381b97c4d9c7b13c40.pdf","sourceUrl":"https://www.se.com/us/en/product/LC1E300PCH2S260N/contactor-for-charging-posteasy-tesys-controldc1-1000v-300a1232v-dcpwmnoepoxyexternal-threadwithout-connector/"},"ai":{"faq":[{"question":"What is the depth of this contactor?","answer":"The depth is 3.2 in (81.3 mm)."},{"question":"What series does the LC1E300PCH2S260N belong to?","answer":"It is part of the Easy TeSys range."},{"question":"What compliance standards does this contactor meet?","answer":"It complies with IEC 60947-4-1 and GB/T 14048.4."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E300PCH2S260N","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E300PCH2S260N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}