{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E32008P7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E32008P7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E32008P7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E32008P7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E32008P7IN, 4P (2NO+2NC) contactor, AC-1 55A at ≤415V, 230V coil, obsolete.","salesMarkdown":"It is rated for AC-1 utilisation category at 55 A up to 415 V, with a 230 V coil — meaning it is designed for switching resistive loads such as heaters or lighting banks, not motor starting. The permissible ambient air temperature around the device spans -20 to 70 °C at Uc, with storage from -60 to 80 °C and operation from -5 to 55 °C. Fire resistance is rated at 850 °C conforming to IEC 60695-2-1, and protective treatment is TH (pollution degree 3) per IEC 60068, so it handles typical industrial atmospheres with conductive dust or humidity. AC-1 covers non-inductive or slightly inductive loads — resistive heaters, incandescent lighting, or resistive banks — where the current inrush is minimal. This is not an AC-3 motor-switching contactor; if your application involves starting a motor, the AC-1 rating does not apply, and you would need a contactor rated for AC-3 duty at the motor's full-load current. The 4-pole configuration with 2NO+2NC gives flexibility for switching both phases and a neutral, or for interlocking control circuits on the NC poles. Mechanical robustness is specified for vibration and shock: 1.5 Gn (5-300 Hz) with the contactor open, 3 Gn (5-300 Hz) closed, and shock ratings of 10 Gn for 11 ms closed and 6 Gn for 11 ms open. These figures confirm the contactor can withstand typical industrial panel vibration from adjacent contactors or drives without nuisance dropout. Operating altitude is rated to 3000 m, which is standard for most installations below that elevation.","metaTitle":"Schneider Electric LC1E32008P7IN Easy TeSys Contactor, 4P, 5","metaDescription":"Obsolete Schneider Electric LC1E32008P7IN Easy TeSys Control contactor. 4P (2NO+2NC), 55A AC-1 at ≤415V, 230V coil. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"93 mm","Range":"Easy TeSys","Width":"56 mm","Height":"64 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3bc67a957b3ede7ce0f447ceb913a269.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E32008P7IN/contactoreasy-tesys-controllc1e4p2no+2ncac1415v55a230v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E32008P7IN/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to the LC1E32008P7IN?","answer":"No official successor order code is listed in the lifecycle record. Any replacement would need to be evaluated on form, fit, and function — matching the 4P (2NO+2NC) configuration, AC-1 55 A rating at ≤415 V, 230 V coil, and DIN-rail mounting. A cross-reference specialist can help identify a viable alternate from the current Easy TeSys or TeSys Deca range."},{"question":"What are the key specifications of the LC1E32008P7IN?","answer":"It is a 4-pole contactor (2NO+2NC) rated AC-1 at 55 A up to 415 V with a 230 V coil. It mounts on plate or DIN rail, has IP2X protection, and operates from -5 to 55 °C. Standards include EN/IEC 60947-1, -4-1, and -5-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E32008P7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E32008P7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}