{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E350BSCT1S260N","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E350BSCT1S260N","canonicalUrl":"https://aoctrl.com/schneider/LC1E350BSCT1S260N","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E350BSCT1S260N","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys, DC contactor, LC1E350BSCT1S260N, 1-pole, 350 A resistive, 1500 V DC max switching, 24 V DC coil.","salesMarkdown":"## What this Easy TeSys contactor does The LC1E350BSCT1S260N is a 1-pole DC contactor from the Easy TeSys range, built for switching resistive loads. Its continuous current rating of 350 A and maximum switching voltage of 1500 V DC set it apart from AC motor contactors. The 24 V DC coil with a pickup voltage range of 0.85 to 1.1 Uc and dropout between 0.1 and 0.75 Uc gives a clean control threshold. At 0.5 mOhm average impedance, power losses stay low even at full load. The contactor handles short-time overloads: 450 A for 30 minutes, 600 A for 120 seconds, up to 1000 A for 25 seconds – useful for capacitor charging or filament inrush. ## DC switching and resistive load only This is not a general-purpose AC-3 motor contactor. It is rated specifically for resistive loads per IEC 60947-4-1. The electrical durability figures reflect breaking tests on resistive circuits at 750 V, 1000 V, and 1500 V – all at 350 A. If you need to switch inductive or motor loads, pick a different Easy TeSys variant. Coil is DC, powered separately from the main circuit. The 55 W inrush drops to 6 W hold-in. Keep the control supply stable within the operational limits to avoid nuisance dropout. ## Mounting, environment, and life Dimensions: 4.1 in deep, 2.008 in wide, 3.9 in tall – single-pole so the profile fits a compact panel slot. Mount vertically per specification. IP60 enclosure means dust-tight; not rated for washdown. Operating temperature from -40°C to 85°C, storage same range. Vibration rated 5 g from 10 to 500 Hz, shock 20 g for 11 ms. Mechanical life 300,000 cycles, electrical life depends on load conditions (details in the spec table).","metaTitle":"Schneider LC1E350BSCT1S260N Easy TeSys DC Contactor, 350 A","metaDescription":"LC1E350BSCT1S260N DC contactor from Easy TeSys, rated 350 A resistive load, 1500 V DC switching, 24 V DC coil. Current production. RFQ to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"4.1 in (104.8 mm)","Range":"Easy TeSys","Width":"2.008 in (51 mm)","title":"LC1E350BSCT1S260N","Height":"3.9 in (98.2 mm)","Category":"US10I1122387","Polarity":"No main contact Yes coil","Standards":"IEC 60947-4-1 GB/T 14048.4","description":"Contactor for charging post,Easy TeSys Control,DC-1 <=1500V 350A,24V DC,double coils,1NO,ceramics,internal thread,without connector","Operating time":"50 ms on closing 30 ms on opening","lifecycle_stage":"current","Mounting Support":"Vertical support","Range of Product":"Easy TeSys Control","Average impedance":"0.5 mOhm - Ith 350 A","Device short name":"LC1E","Inrush power in W":"55 W","Poles description":"1P","Tightening torque":"Power circuit 70.8...88.5 lbf.in (8...10 N.m)","Operating altitude":"13123.36 ft (4000 m) without derating","End Connection Type":"Internal Thread","Control circuit type":"DC","Contactor application":"Resistive load","Electrical durability":"2000 cycles at 750 V, 350 A on resistive load for only breaking, 0.6s open, 5.4s break 1500 cycles at 1000 V, 350 A on resistive load for only breaking, 0.6s open, 5.4s break 1000 cycles at 1500 V, 350 A on resistive load for only breaking, 0.6s open, 5.4s break","Insulation resistance":"1000 MOhm at 1000 V DC","Mechanical durability":"300000 cycles","Mechanical robustness":"Vibrations 5 g, 10...500 Hz) Shocks 20 g for 11 ms)","Nbr. of units in pkg.":"1","Connections - terminals":"Power circuit M8 nut Power circuit flat washers Power circuit spring washers Control circuit 2-wire supply 11.8 in (30 cm)","IP degree of protection":"IP60","Pole contact composition":"1 NO","Maximum switching voltage":"1500 V DC","Minimum switching current":"0.1 A","Minimum switching voltage":"8 V for DC","Product or Component Type":"Contactor","[Uc] control circuit voltage":"24 V DC","Auxiliary contact composition":"1 NO","Permissible short-time rating":"350 A for continuous 450 A 30 min 600 A 120 s 800 A 40 s 1000 A 25 s","[Ui] rated insulation voltage":"1500 V IEC 60947-4-1 power circuit","Control circuit voltage limits":"0.85...1.1 Uc operational 0.1...0.75 Uc drop-out","Hold-in power consumption in W":"6 W","Ambient air temperature for operation":"-40...185 °F (-40...85 °C) operation -40...185 °F (-40...85 °C) storage","[Uimp] rated impulse withstand voltage":"8 kV coil not connected to the power circuit IEC 60947","[Ith] conventional free air thermal current":"350 A for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$625.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/24936acccfe508ad618cd0b0fd392be1.pdf","sourceUrl":"https://www.se.com/us/en/product/LC1E350BSCT1S260N/contactor-for-charging-posteasy-tesys-controldc1-1500v-350a24v-dcdouble-coils1noceramicsinternal-threadwithout-connector/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E350BSCT1S260N","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E350BSCT1S260N when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}