{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E38004M7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E38004M7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E38004M7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E38004M7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys contactor, LC1E38004M7IN, 4P 4NO, AC-1 20A ≤415V, 220V AC coil, DIN rail mount.","salesMarkdown":"The LC1E38004M7IN is a 4-pole (4 NO) Easy TeSys contactor from Schneider Electric, rated for AC-1 resistive loads at 20 A up to 415 V, with a 220 V AC coil. It's the straightforward choice for switching resistive loads like heaters or lighting banks in a control panel — no derating gymnastics for inductive kickback. That AC-1 rating means it's sized for resistive duty where inrush is minimal. If you're switching motor loads (AC-3), this isn't the contactor you want — the inductive break current would be lower. Stick to the spec: resistive loads only, up to 20 A continuous. No special cutouts needed. IP2X finger protection on the contactor body means it's safe for open-panel mounting where incidental contact is possible, but it's not sealed against washdown. Keep it inside the enclosure. Operates from -5 °C to 55 °C ambient, stores from -60 °C to 80 °C. Good for a heated plant floor or a cold warehouse — just don't try to switch it below -5 °C. Rated for altitudes up to 3000 m — no derating needed for most installations outside high-mountain sites.","metaTitle":"Schneider Electric LC1E38004M7IN Easy TeSys Contactor, 4P 4N","metaDescription":"Schneider Electric LC1E38004M7IN Easy TeSys contactor, 4P 4NO, rated 20A AC-1 at ≤415V, 220V AC coil. Active production. DIN rail mount. EN/IEC 60947 compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"93 mm","Range":"Easy TeSys","Width":"56 mm","Height":"64 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor closed (10 Gn for 11 ms) Shocks contactor open (6 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/LC1E38004M7IN/easy-tesys-contactor-4p4-no-ac1-415-v-20a-220-v-ac-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E38004M7IN/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative in the Easy TeSys family?","answer":"Within the same Easy TeSys range, the closest sibling would be a 4-pole contactor with a different coil voltage or a 3-pole variant if you don't need the fourth pole. The LC1E38004M7IN is the 4 NO, 20 A AC-1, 220 V AC coil version — any alternative would differ on coil voltage or pole count. No direct pin-compatible drop-in with different ratings exists in this family; you'd need to match the coil and pole configuration exactly."},{"question":"What compliance documentation is available for this contactor?","answer":"It's certified to EN/IEC 60947-1, -4-1, and -5-1, plus GB/T 14048.1.4, and.5. Fire resistance per IEC 60695-2-1 at 850 °C. Protective treatment TH (pollution degree 3) per IEC 60068. RoHS and REACH declarations are standard for Schneider's Easy TeSys line — request those with your RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E38004M7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E38004M7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}