{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E40004M5WBIN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E40004M5WBIN","canonicalUrl":"https://aoctrl.com/schneider/LC1E40004M5WBIN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E40004M5WBIN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control LC1E40004M5WBIN, 4-pole contactor, 75 A AC-1 at 415 V, 220 V AC 50 Hz coil, screw clamp terminals, IP20.","salesMarkdown":"The control circuit is a 220 V AC 50 Hz wide-range coil that pulls 160 VA inrush at cos φ 0.75. The contactor is supplied without auxiliary contact blocks, so any auxiliary switching (status feedback, interlocking) must be added externally. The main poles are 4 NO (normally open), meaning all four power paths close when the coil is energised. For motor loads (AC-3), this contactor is not rated — the evidence only lists AC-1 utilisation, so it should be specified only for resistive or low-inrush loads. The rated breaking capacity of 320 A at 440 V and making capacity of 400 A at 440 V confirm it can handle occasional overloads on closing and opening within the AC-1 duty cycle. Mechanical durability is 5 million cycles; electrical durability under AC-1 is 350,000 cycles. That electrical life figure is the practical limit for a continuously cycled resistive load — plan maintenance intervals around it. The maximum operating rate of 1200 cycles per hour at 60 °C means it can keep pace with a fast-cycling oven or packaging line heater bank. The IP20 finger-safe enclosure is standard for panel-mount gear — not for washdown or outdoor use without an additional enclosure. Power circuit terminals accept 2.5 to 25 mm² solid or flexible wire with cable ends; control circuit terminals take 1 to 4 mm². Tightening torques are 5 N·m for power and 1.2 N·m for control, so a torque screwdriver is needed for the power connections. Heat dissipation runs 6 to 10 W for the control circuit alone, plus 5.4 W per pole under AC-1 load. In a densely packed panel, that heat adds up — ensure adequate ventilation or derating if ambient exceeds 40 °C. The contactor complies with EN/IEC 60947-1, EN/IEC 60947-4-1, and EN/IEC 60947-5-1, plus the Chinese GB/T equivalents. It carries TH protective treatment per IEC 60068 for tropical environments. Operating altitude is rated to 3000 m without derating.","metaTitle":"Schneider Electric LC1E40004M5WBIN Easy TeSys Contactor, 75","metaDescription":"Schneider Electric LC1E40004M5WBIN Easy TeSys contactor, 4-pole, 75 A AC-1 at 415 V, 220 V AC 50 Hz coil. Active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"110 mm","Range":"Easy TeSys","Width":"85 mm","Height":"127 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Operating time":"20...26 ms on closing 8...12 ms on opening","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Heat dissipation":"6...10 W for control circuit","Mounting support":"DIN rail Plate","Pollution degree":"3","Range of product":"Easy TeSys Control","Average impedance":"1.5 mOhm - Ith 75 A 50 Hz for power circuit","Device short name":"LC1E","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 5 N.m","Inrush power in VA":"160 VA 50 Hz cos phi 0.75 (at 20 °C)","Operating altitude":"3000 m","Control circuit type":"AC at 50 Hz wide range","Overvoltage category":"III","Protective treatment":"TH conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Electrical durability":"350000 cycles AC-1","Mechanical durability":"5000000 cycles","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (6 Gn for 11 ms) Shocks contactor closed (7 Gn for 11 ms)","Associated fuse rating":"80 A gG at <= 690 V coordination type 1 for power circuit","Maximum operating rate":"1200 cyc/h 60 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 2 1...2.5 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 1 2.5...25 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 2 2.5...10 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: solid Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: solid Power circuit: screw clamp terminals 1 2.5...25 mm² - cable stiffness: solid Power circuit: screw clamp terminals 2 2.5...16 mm² - cable stiffness: solid","IP degree of protection":"IP20 conforming to IEC 60529","Rated breaking capacity":"320 A at 440 V for power circuit conforming to IEC 60947","Pole contact composition":"4 NO","Product or component type":"Contactor","Irms rated making capacity":"400 A at 440 V AC for power circuit conforming to IEC 60947-4-1","Power dissipation per pole":"5.4 W AC-1","[Uc] control circuit voltage":"220 V AC 50 Hz","Auxiliary contact composition":"Without","[Ui] rated insulation voltage":"690 V conforming to IEC 60947-4-1","Control circuit voltage limits":"0.3...0.6 Uc (-5...55 °C):drop-out 50 Hz 0.7...1.25 Uc (-5...55 °C):operational 50 Hz","[Ie] rated operational current":"75 A (at <40 °C) at <= 415 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: <= 690 V AC 50/60 Hz","Hold-in power consumption in VA":"15 VA 50 Hz cos phi 0.3 (at 20 °C)","[Uimp] rated impulse withstand voltage":"6 kV conforming to IEC 60947","[Icw] rated short-time withstand current":"320 A 40 °C - 10 s for power circuit 165 A 40 °C - 60 s for power circuit 72 A 40 °C - 600 s for power circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/in/en/product/LC1E40004M5WBIN/easy-tesys-contactor-4p-ctr-25a-ac14no220v-50hz-wb/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E40004M5WBIN/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"The LC1E40004M5WBIN is a 4-pole, 4 NO contactor rated 75 A AC-1 at up to 415 V AC with a 220 V AC 50 Hz coil. It has a mechanical durability of 5 million cycles and electrical durability of 350,000 cycles under AC-1. The IP20 enclosure is suitable for panel mounting."},{"question":"What compliance documentation does this contactor have?","answer":"The contactor complies with EN/IEC 60947-1, EN/IEC 60947-4-1, and EN/IEC 60947-5-1 standards, plus GB/T 14048.1, GB/T 14048.4, and GB/T 14048.5. It carries TH protective treatment per IEC 60068 and fire resistance tested to 850 °C per IEC 60695-2-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E40004M5WBIN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E40004M5WBIN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}