{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E65008Q7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E65008Q7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E65008Q7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E65008Q7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control contactor, LC1E65008Q7IN, 4P (2NO+2NC), AC-1 ≤415V, 85A, 380V coil, IP2X, DIN rail/plate mount.","salesMarkdown":"## 85A resistive switching, 4P with mixed NO/NC The LC1E65008Q7IN: The pole configuration is 2 normally-open and 2 normally-closed, giving you both make and break contacts in one block for circuits that need a mix — like heater banks with a separate control interlock. The 380 V coil means this is a standard mains-voltage pickup, common in panels where the control transformer feeds 380 V directly. Mounting is either plate or DIN rail, so it fits retrofit into an existing panel layout without a different footprint. ## Obsolete — sourcing via independent channels Schneider lists this part as obsolete. For a line-down situation or a BOM freeze, the part is available through independent surplus and broker channels — quantities are lot-specific and confirmed at RFQ. If you are holding an installed base of Easy TeSys Control contactors and need a drop-in spare, this is the exact part. For new designs, look at the current TeSys range for a functional equivalent — but the pinout and footprint may differ, so a panel layout check is needed before committing. ## Environmental and mechanical ratings for plant-floor duty The contactor carries IP2X finger protection on the body, so it is safe for open-panel mounting where operators might reach in. The TH protective treatment (pollution degree 3) means it handles conductive dust and humidity common in industrial environments without conformal coating. Vibration rating is 3 Gn closed (5–300 Hz) and shock rating 7 Gn closed for 11 ms, so it stays pulled in on a conveyor line or near a press. Altitude rating to 3000 m — no derating needed for most installations except high-altitude mining or mountain sites above that ceiling. ## Compliance and standards coverage That covers most global installations — IEC for Europe/Asia, GB for China. The 850 °C glow-wire test per IEC 60695-2-1 is a further safety marker for the housing material.","metaTitle":"Schneider LC1E65008Q7IN Easy TeSys Contactor, 85A AC-1, 4P","metaDescription":"Schneider Electric LC1E65008Q7IN Easy TeSys Control contactor, 85A AC-1 at ≤415V, 4P (2NO+2NC), 380V coil. Obsolete; sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"125 mm","Range":"Easy TeSys","Width":"85 mm","Height":"127 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (6 Gn for 11 ms) Shocks contactor closed (7 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e4dd42e377a18e63e28003e7385b4b19.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E65008Q7IN/contactoreasy-tesys-controllc1e4p2no+2ncac1415v85a380v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E65008Q7IN/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to LC1E65008Q7IN in the Easy TeSys family?","answer":"The current TeSys range offers functionally similar 4-pole contactors with AC-1 ratings, but the footprint, coil voltage options, and terminal layout may differ. A panel layout check and coil voltage match is required before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E65008Q7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E65008Q7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}