{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E65R5","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E65R5","canonicalUrl":"https://aoctrl.com/schneider/LC1E65R5","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E65R5","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control series, LC1E65R5, 3P(3NO) contactor, AC-3/AC-3e ≤440V 65A, 440V AC 50Hz coil.","salesMarkdown":"The Schneider Electric LC1E65R5 is a three-pole contactor from the Easy TeSys Control line, rated for 65 A in AC-3/AC-3e duty at up to 440 V. It is sized for motor switching on conveyors, pumps, and compressors. It also carries an AC-1 resistive load rating, which covers heater banks or lighting where the inrush is lower. The contactor is rated for 3 poles, all normally open (3P(3NO)), and mounts on either a DIN rail or a plate — gives you flexibility in panel layout. The 65 A AC-3 rating means the contactor is tested to make and break motor loads. If your motor's full-load amps are 60 A or less, this contactor has headroom. The coil is 440 V AC 50 Hz. Verify your control transformer matches this voltage. That means there is a brief moment where both sets of contacts are open during transition — important if you are using the NC contact for a safety interlock or a mechanical brake that must not overlap with the motor run signal. It prevents a momentary short-circuit condition between the two circuits. It also meets the Chinese GB/T equivalents and the glow-wire test for household appliances (EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ). Mount it inside an enclosure with at least IP54 to keep debris and moisture off the contacts.","metaTitle":"Schneider Electric LC1E65R5 Easy TeSys Contactor, 65A, 440V","metaDescription":"Obsolete Schneider Electric LC1E65R5 contactor from Easy TeSys Control series. 3P, AC-3/AC-3e, 65A at ≤440V, 440V AC 50Hz coil. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"114 mm","Range":"Easy TeSys","Width":"75 mm","Height":"127 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5 EN/IEC 60335-1:Clause 30.2 EN/IEC 60335-2-40:Annex JJ","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"DIN rail Plate","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"3P","Operating altitude":"3000 m without derating","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068-2-30 test Db","Utilisation category":"AC-3 AC-3e AC-1","Contactor application":"Motor control Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (6 Gn for 11 ms) Shocks contactor closed (7 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/24723e2ed36d442a9b99f7a39a29db41.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E65R5/contactoreasy-tesys-controllc1e3p3noac3-ac3e440v65a440v-ac-coil50hz/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E65R5/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to the LC1E65R5?","answer":"There is no official successor listed in the lifecycle record. A parametric search for a 3-pole contactor with a 65 A AC-3 rating and a 440 V AC 50 Hz coil would be the starting point, but pin-compatibility and footprint would need to be verified against the existing panel layout."},{"question":"What are the key specifications of the LC1E65R5?","answer":"It is a 3-pole (3NO) contactor rated for AC-3/AC-3e duty at 65 A up to 440 V, with a 440 V AC 50 Hz coil. It mounts on DIN rail or plate, measures 127 mm high by 75 mm wide by 114 mm deep, and operates from -5 to 55 °C."},{"question":"What standards does the LC1E65R5 comply with?","answer":"It is certified to EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T equivalents. It also meets the glow-wire test for household appliances (EN/IEC 60335-1 Clause 30.2 and EN/IEC 60335-2-40 Annex JJ) and has fire resistance of 850 °C per IEC 60695-2-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E65R5","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E65R5 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}