{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E80004M7IN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E80004M7IN","canonicalUrl":"https://aoctrl.com/schneider/LC1E80004M7IN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E80004M7IN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, LC1E80004M7IN, 4-pole contactor, AC-1 110 A at ≤415 V, 220 V coil, plate/DIN-rail mount.","salesMarkdown":"The Schneider Electric LC1E80004M7IN is a 4-pole contactor from the Easy TeSys Control range, rated for AC-1 resistive load duty at 110 A up to 415 V, with a 220 V coil. It switches resistive loads — heaters, lighting banks, or transformer primaries — where inrush is low and the current curve stays clean. The 4-pole arrangement gives you two normally-open and two normally-closed main contacts, which is useful for splitting a load across phases or for two-wire control circuits that need a break before make. The AC-1 utilisation category is the key rating: it certifies the contactor for resistive loads where the current is nearly in phase with voltage, so there is minimal arcing at break. That 110 A at ≤415 V is the full-load continuous current the main poles can carry and interrupt under those conditions. If your load is motor (AC-3) or inductive (AC-4), this contactor is not rated for that duty — the inrush and arc energy would exceed its design limits. The 220 V coil is a standard control voltage in many industrial panels, but it is not a dual-voltage coil — it pulls in and holds at 220 V nominal. The 850 °C glow-wire test (IEC 60695-2-1) confirms the housing material resists ignition under fault conditions.","metaTitle":"Schneider LC1E80004M7IN Easy TeSys Contactor, 4P, AC-1 110A,","metaDescription":"Obsolete Schneider LC1E80004M7IN Easy TeSys contactor, 4P (2NO+2NC), AC-1 110A at ≤415V, 220V coil. Sourced to order against RFQ. Standards EN/IEC 60947.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"120 mm","Range":"Easy TeSys","Width":"95 mm","Height":"127 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"Plate DIN rail","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"4P","Operating altitude":"3000 m","Protective treatment":"TH (pollution degree 3) conforming to IEC 60068","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (6 Gn for 11 ms) Shocks contactor closed (7 Gn for 11 ms)","IP degree of protection":"IP2X conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for control circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/010c382c72dc889bed5f64ea396a74f8.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E80004M7IN/contactoreasy-tesys-controllc1e4p2no+2ncac1415v110a220v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E80004M7IN/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings of the LC1E80004M7IN?","answer":"It is a 4-pole contactor (2NO+2NC) rated AC-1 at 110 A up to 415 V, with a 220 V coil. It mounts on a plate or DIN rail and has IP2X finger protection."},{"question":"What standards does the LC1E80004M7IN comply with?","answer":"It complies with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T equivalents. The housing passes the 850 °C glow-wire test per IEC 60695-2-1."},{"question":"How do I source the LC1E80004M7IN if it is obsolete?","answer":"Since it is obsolete, the part is sourced through surplus or independent channels. Submit an RFQ with your quantity and target price; we will check our network of new-old-stock and pulled-from-stock inventory."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E80004M7IN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E80004M7IN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}