{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E80008N5WB","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E80008N5WB","canonicalUrl":"https://aoctrl.com/schneider/LC1E80008N5WB","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E80008N5WB","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control contactor, 4-pole, LC1E80008N5WB, 100 A AC-1 at ≤440 V, 415 V AC 50 Hz coil, IP20, DIN-rail mount.","salesMarkdown":"The Schneider Electric LC1E80008N5WB is a 4-pole contactor from the Easy TeSys Control range, rated for resistive load switching (AC-1 utilisation category) at 100 A up to 440 V AC. It has 2 normally-open and 2 normally-closed main poles, with no built-in auxiliary contacts — you add those separately if needed. The 100 A AC-1 rating means this contactor is sized for resistive heater banks, lighting, or transformer primary switching — not for motor starts. That covers most industrial control applications globally. No UL or CSA mark is listed in the spec sheet, so if you need UL for a North American panel, double-check the specific variant or request the UL-marked version from the Easy TeSys family. The coil draws 200 VA inrush at 50 Hz (cos φ 0.75) and dissipates 6–10 W in the control circuit — enough to factor into your control transformer sizing if you're switching multiple contactors simultaneously. The drop-out voltage is 0.3–0.6 Uc, so it releases reliably down to about 125 V AC on a 415 V coil. Mechanical durability is 3 million cycles, electrical durability 350,000 cycles in AC-1 duty. That's typical for a contactor in this class — plenty for most resistive load applications. The maximum operating rate is 1200 cycles per hour at 60 °C, so it can handle frequent cycling in a process heater or oven control. The power circuit terminals accept solid or flexible cable up to 50 mm², with a tightening torque of 12 N.m. The associated fuse recommendation is 160 A gG at ≤690 V for type 1 coordination — that's the fuse size to spec in your panel for short-circuit protection. That's the peak current it can close onto or interrupt without welding or damage, giving you selectivity headroom in a fault scenario.","metaTitle":"Schneider Electric LC1E80008N5WB Easy TeSys Contactor, 100 A","metaDescription":"Schneider Electric LC1E80008N5WB Easy TeSys contactor, 4-pole, 100 A AC-1 at 440 V, 415 V 50 Hz coil. IP20, DIN-rail mount. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"120 mm","Range":"Easy TeSys","Width":"95 mm","Height":"127 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Operating time":"6...20 ms on opening 20...35 ms on closing","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Heat dissipation":"6...10 W for control circuit","Mounting support":"Plate DIN rail","Pollution degree":"3","Range of product":"Easy TeSys Control","Average impedance":"0.8 mOhm - Ith 100 A 50 Hz for power circuit","Device short name":"LC1E","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 12 N.m","Inrush power in VA":"200 VA 50 Hz cos phi 0.75 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 50 Hz wide range","Overvoltage category":"III","Protective treatment":"TH conforming to IEC 60068-2-30","Utilisation category":"AC-1","Contactor application":"Resistive load","Electrical durability":"350000 cycles AC-1","Mechanical durability":"3000000 cycles","Mechanical robustness":"Vibrations contactor open (1.5 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (6 Gn for 11 ms) Shocks contactor closed (7 Gn for 11 ms)","Associated fuse rating":"160 A gG at <= 690 V coordination type 1 for power circuit","Maximum operating rate":"1200 cyc/h 60 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 2 1...2.5 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 1 4...50 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 2 4...16 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1...4 mm² - cable stiffness: solid Control circuit: screw clamp terminals 2 1...4 mm² - cable stiffness: solid Power circuit: screw clamp terminals 1 4...50 mm² - cable stiffness: solid Power circuit: screw clamp terminals 2 4...50 mm² - cable stiffness: solid","IP degree of protection":"IP20 conforming to IEC 60529","Rated breaking capacity":"640 A at 440 V for power circuit conforming to IEC 60947","Pole contact composition":"2 NO + 2 NC","Product or component type":"Contactor","Irms rated making capacity":"800 A at 440 V AC for power circuit conforming to IEC 60947-4-1","Power dissipation per pole":"9.7 W AC-1","[Uc] control circuit voltage":"415 V AC 50 Hz","Auxiliary contact composition":"Without","[Ui] rated insulation voltage":"690 V conforming to IEC 60947-4-1","Control circuit voltage limits":"0.3...0.6 Uc (-5...55 °C):drop-out 50 Hz 0.7...1.25 Uc (-5...55 °C):operational 50 Hz","[Ie] rated operational current":"100 A (at <55 °C) at <= 440 V AC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: <= 690 V AC 50/60 Hz","Hold-in power consumption in VA":"20 VA 50 Hz cos phi 0.3 (at 20 °C)","[Uimp] rated impulse withstand voltage":"6 kV conforming to IEC 60947","[Icw] rated short-time withstand current":"640 A 40 °C - 10 s for power circuit 320 A 40 °C - 60 s for power circuit 135 A 40 °C - 600 s for power circuit","[Ith] conventional free air thermal current":"100 A (at 55 °C) for power circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/512e5ee2c505eed643ebb209dc194d65.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E80008N5WB/contactoreasy-tesys-controllc1e4p2no+2ncac1-100a415v50hz-wide-range/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E80008N5WB/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for this contactor?","answer":"The contactor is certified to EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, plus Chinese GB/T 14048.1, 14048.4, and 14048.5. It also carries TH protective treatment per IEC 60068-2-30 for humid environments. RoHS and REACH declarations are typically available from Schneider's documentation portal for the Easy TeSys range."},{"question":"What is the depth of the LC1E80008N5WB?","answer":"The depth is 120 mm, with a width of 95 mm and height of 127 mm. That fits standard DIN-rail or plate-mount spacing in most enclosures."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E80008N5WB","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E80008N5WB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}