{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1E95BD","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1E95BD","canonicalUrl":"https://aoctrl.com/schneider/LC1E95BD","factsUrl":"https://aoctrl.com/api/mcp/products/LC1E95BD","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Easy TeSys Control, contactor, LC1E95BD, 3P(3NO), AC-3/AC-3e ≤440V 95A, 24V DC coil, DIN rail/plate mount, IP20.","salesMarkdown":"The Schneider Electric LC1E95BD is a 3-pole contactor from the Easy TeSys Control range, rated 95 A in AC-3 / AC-3e duty at ≤440 V with a 24 V DC coil. That AC-3 rating is what governs motor switching — it's the current the contactor can make and break across a typical squirrel-cage induction motor start, so 95 A lines up with a motor full-load current in that range. The coil holds at 24 V DC nominal; the guaranteed non-overlap time of 1.5 ms between NC and NO contacts on both energisation and de-energisation means the auxiliary contacts sequence cleanly for interlocking or safety circuits. It also carries an AC-1 rating for resistive loads, so it handles heater banks or lighting banks at the same current level, but the AC-3e rating is the one to watch for IEC motor-protection coordination — it's the enhanced version of AC-3 with tighter making-capacity requirements. The 24 V DC coil is a common control voltage in modern PLC-driven panels; just confirm your DC supply can deliver the inrush without dipping below the dropout threshold. Mounts on DIN rail or a backplate — the 85 mm width and 126 mm depth keep it within a standard 8-module DIN footprint. The operating ambient range is -5 to 55 °C, so if it's going into a non-ventilated panel near a heat source, check the thermal curve; storage range extends to -60 to 80 °C. Altitude derating kicks in above 3000 m — no change needed for most installations. The protective treatment is TH conforming to IEC 60068-2-30, which means it's tested for tropical humid conditions — condensation and cyclic humidity won't cause creepage failures. That's a useful detail if the panel lives in a non-conditioned space or near a washdown zone (even though the contactor itself isn't IP-rated for water ingress). The 850 °C glow-wire test per IEC 60695-2-1 means the thermoplastic body won't propagate a flame under fault conditions. Vibration resistance is 3 Gn closed (5 to 300 Hz) and 1.5 Gn open; shock resistance is 7 Gn closed, 5 Gn open — solid for machinery mounted on a frame or conveyor line. That means the BOM line stays stable, and the factory supports it with documentation and spares. No cross-reference needed for obsolescence; it's a straight order-code item.","metaTitle":"Schneider LC1E95BD Easy TeSys Contactor, 95A, 24V DC Coil, 3","metaDescription":"Schneider Electric LC1E95BD Easy TeSys Control contactor. 95A AC-3/AC-3e at ≤440V, 24V DC coil, 3P(3NO). Active production. DIN rail mount. IP20. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"126 mm","Range":"Easy TeSys","Width":"85 mm","Height":"181 mm","Standards":"EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 GB/T 14048.1 GB/T 14048.4 GB/T 14048.5","Fire resistance":"850 °C conforming to IEC 60695-2-1","lifecycle_stage":"current","Mounting support":"DIN rail Plate","Non-overlap time":"1.5 ms on energisation guaranteed between NC and NO contact 1.5 ms on de-energisation guaranteed between NC and NO contact","Range of product":"Easy TeSys Control","Device short name":"LC1E","Poles description":"3P","Operating altitude":"3000 m without derating","Protective treatment":"TH conforming to IEC 60068-2-30 test Db","Utilisation category":"AC-3 AC-3e AC-1","Contactor application":"Motor control Resistive load","Mechanical robustness":"Shocks contactor open (5 Gn for 11 ms) conforming to IEC 60068-2-7 Shocks contactor closed (7 Gn for 11 ms) conforming to IEC 60068-2-7 Vibrations contactor open (1.5 Gn, 5...300 Hz) conforming to IEC 60068-2-6 Vibrations contactor closed (3 Gn, 5...300 Hz) conforming to IEC 60068-2-6","IP degree of protection":"IP20 conforming to IEC 60529","Product or component type":"Contactor","[Ue] rated operational voltage":"Power circuit: 10 MOhm for signalling circuit","Permissible ambient air temperature around the device":"-20...70 °C at Uc -60...80 °C storage -5...55 °C operation"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/112d8d90d5f67f64219463696455df8b.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1E95BD/contactoreasy-tesys-controllc1e3p3noac3-ac3e440v95a24v-dc-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1E95BD/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for the LC1E95BD?","answer":"It's a 3-pole contactor rated 95 A in AC-3/AC-3e at ≤440 V, with a 24 V DC coil. It also carries an AC-1 resistive load rating. The coil holds at 24 V DC nominal."},{"question":"What mounting options does the LC1E95BD support?","answer":"It mounts on DIN rail or a plate. Dimensions are 85 mm wide, 126 mm deep, and 181 mm high."},{"question":"What standards does the LC1E95BD comply with?","answer":"It complies with EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, and the Chinese GB/T 14048 series. It also passes the 850 °C glow-wire test per IEC 60695-2-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1E95BD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1E95BD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}