{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1154M7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1154M7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1154M7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1154M7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F, LC1F1154M7, 4-pole contactor, 200 A AC-1, 220 V AC 40-400 Hz coil, plate mount.","salesMarkdown":"The 4 NO configuration gives you four independent normally-open poles, each rated for the full 200 A in AC-1. The coil pulls 770 VA inrush and holds at 8.1 VA, so your control transformer needs to handle that surge. Mechanical durability is 10 million cycles, and the contactor is rated for 2400 operations per hour at 55 °C — fine for frequent switching in a process heater or oven. The control circuit is AC only (40-400 Hz), with a drop-out range of 20-55% of Uc and an operating range of 85-110% of Uc at 55 °C. That means the coil will drop out reliably between 44 and 121 V AC on a 220 V nominal supply — good for brownout ride-through on a resistive load bank. The rated impulse withstand voltage is 8 kV, and the insulation voltage is 1000 V per IEC 60947-4-1, so it's comfortable in 480 V panels with proper overvoltage category III coordination. Plate-mounted only — no DIN-rail adapter. The dimensions are 162 mm high, 200.5 mm wide, and 171 mm deep, so it needs a solid backplate with clearance for the power circuit bolted connections. Power terminals accept bar (up to 20 x 3 mm busbar), ring lugs up to 95 mm², or connectors for 95 mm² cable. Control wiring uses screw clamp terminals accepting 1 to 4 mm² solid or flexible (with or without ferrule). Tighten power connections to 10 N·m and control connections to 1.2 N·m. The front face with shrouds is IP2X per IEC 60529 and VDE 0106 — finger-safe once shrouded, but not sealed against dust or moisture.","metaTitle":"Schneider Electric LC1F1154M7 TeSys F Contactor, 200 A AC-1,","metaDescription":"Schneider Electric LC1F1154M7 TeSys F contactor, 200 A rated operational current (AC-1), 4 NO poles, 220 V AC 40-400 Hz coil. EOL hot status; sourced to order against RFQ. Standard","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"162 mm","Standards":"EN 60947-1 JIS C8201-4-1 EN 60947-4-1 IEC 60947-4-1 IEC 60947-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.37 mOhm - Ith 200 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Power circuit: 10 N.m Control circuit: 1.2 N.m","Compatibility code":"LC1F","Inrush power in VA":"770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"125 A aM at 200 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Power circuit: bar 2 cable(s) - busbar cross section: 20 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 95 mm² Power circuit: connector 1 cable(s) 95 mm² Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"920 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"15 W AC-1","[Uc] control circuit voltage":"220 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"200 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1100 A 40 °C - 10 s 640 A 40 °C - 30 s 520 A 40 °C - 1 min 400 A 40 °C - 3 min 320 A 40 °C - 10 min","[Ith] conventional free air thermal current":"200 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5d2637435e24a25f75b21533a6231b31.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1F1154M7/tesys-f-contactor-4p-4-no-ac1-440-v-200-a-coil-220-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1154M7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy LC1F1154M7?","answer":"This part is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm position."},{"question":"What is the rated operational current of LC1F1154M7?","answer":"The LC1F1154M7 is rated for 200 A in AC-1 duty (resistive loads) at up to 440 V and below 40 °C ambient."},{"question":"What compliance standards does LC1F1154M7 meet?","answer":"It complies with IEC 60947-4-1, IEC 60947-1, EN 60947-4-1, EN 60947-1, and JIS C8201-4-1. The rated insulation voltage is 1000 V per IEC 60947-4-1 and 1500 V per VDE 0110 group C."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1154M7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1154M7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}