{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1154P5","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1154P5","canonicalUrl":"https://aoctrl.com/schneider/LC1F1154P5","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1154P5","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F, LC1F1154P5, 4-pole contactor, 200 A AC-1, 4 NO, 230 VAC 50 Hz coil, plate mount.","salesMarkdown":"## TeSys F 4-pole contactor — 200 A AC-1, 230 VAC coil The Schneider Electric LC1F1154P5 is a TeSys F 4-pole contactor rated for 200 A in AC-1 utilisation category (resistive loads) at ≤440 V, with 4 normally-open power poles and a 230 V AC 50 Hz control coil. This contactor is designed for plate mounting and handles resistive load switching — think heating banks, lighting stages, or transformer primary circuits where inrush is minimal and the load current stays continuous. The 200 A AC-1 rating means it can carry and break that current continuously under resistive conditions; the 4 NO pole configuration gives you four independent switching paths, each rated for the full 200 A when paralleled or split across separate load groups. Rated operational current of 200 A at ≤440 V in AC-1 duty — this is the resistive load rating. If your load is motor (AC-3) or mixed, the contactor's thermal current (Ith) of 200 A at 50 Hz gives a ceiling, but AC-3 derating applies; verify against your motor FLA. Control coil is 230 V AC 50 Hz, with a pick-up range of 0.85–1.1 Uc and drop-out at 0.35–0.55 Uc (at 55 °C). Inrush power is 550 VA at 50 Hz cos φ 0.3; hold-in drops to 45 VA. That matters for transformer-coupled control circuits — the inrush spike can sag a small control transformer. Mechanical durability is 10 million cycles; maximum operating rate is 2400 cycles/hour at 55 °C. For high-speed cycling applications like resistance welding or fast indexing conveyors, that rate sets the limit. Associated fuse recommendations: 125 A aM or 200 A gG at ≤440 V, for short-circuit coordination. IP2X front face with shrouds (IEC 60529 / VDE 0106) — finger-safe from the front when shrouds are fitted. Altitude rating is 3000 m without derating. Plate-mounted — no DIN-rail clip on this frame size. Dimensions: 162 mm height, 200.5 mm width, 171 mm depth. Power circuit accepts bar (20 x 3 mm), lugs (95 mm²), or bolted connections; control circuit uses screw-clamp terminals for 1–4 mm² flexible or solid. Tightening torque: power circuit 10 N·m, control circuit 1.2 N·m.","metaTitle":"Schneider LC1F1154P5 TeSys F Contactor, 200 A AC-1, 4 NO, 23","metaDescription":"Schneider Electric LC1F1154P5 TeSys F 4-pole contactor. 200 A rated operational current AC-1, 4 NO contacts, 230 VAC 50 Hz coil. EOL phase. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"162 mm","Standards":"IEC 60947-4-1 IEC 60947-1 EN 60947-1 EN 60947-4-1 JIS C8201-4-1","Operating time":"23...35 ms closing 5...15 ms opening","lifecycle_stage":"eol_hot","Heat dissipation":"12...16 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.37 mOhm - Ith 200 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Power circuit: 10 N.m Control circuit: 1.2 N.m","Compatibility code":"LC1F","Inrush power in VA":"550 VA, 50 Hz cos phi 0.3 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 50 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"125 A aM at 200 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Power circuit: bar 2 cable(s) - busbar cross section: 20 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 95 mm² Power circuit: connector 1 cable(s) 95 mm² Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"920 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"15 W AC-1","[Uc] control circuit voltage":"230 V AC 50 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 50/60 Hz (at 55 °C) Drop-out: 0.35...0.55 Uc 50/60 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"200 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"45 VA, 50 Hz cos phi 0.3 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1100 A 40 °C - 10 s 640 A 40 °C - 30 s 520 A 40 °C - 1 min 400 A 40 °C - 3 min 320 A 40 °C - 10 min","[Ith] conventional free air thermal current":"200 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8122584698f7275dae96039ba7b4aec3.pdf","sourceUrl":"https://www.se.com/za/en/product/LC1F1154P5/tesys-f-contactor-4p-4-no-ac1-440-v-200-a-coil-230-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1154P5/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy the LC1F1154P5 and how is it quoted?","answer":"The LC1F1154P5 is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock count or lead-time figure is published. Submit an RFQ for a real-time check on the aftermarket."},{"question":"What are the key ratings of the LC1F1154P5?","answer":"200 A rated operational current in AC-1 (resistive loads) at ≤440 V, 4 NO power poles, 230 V AC 50 Hz control coil. Mechanical durability 10 Mcycles, max operating rate 2400 cyc/h at 55 °C. Rated breaking capacity 920 A per IEC 60947-4-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1154P5","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1154P5 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}