{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1154P7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1154P7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1154P7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1154P7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F, LC1F1154P7, 4-pole power contactor, 200 A rated operational current (AC-1), 230 V AC 50/60 Hz coil, plate mount, EOL lifecycle.","salesMarkdown":"The Schneider Electric LC1F1154P7 is a TeSys F 4-pole power contactor rated for 200 A in AC-1 utilisation category (resistive loads) at up to 440 V, with a 230 V AC control coil. It switches resistive heating banks, lighting, or distribution loads — not motor starting, which would need an AC-3 rated contactor. The 4 NO pole configuration gives you four normally-open main contacts in one package, saving panel space over ganging two 2-pole units. The 230 V AC control coil draws 770 VA inrush and 8.1 VA holding at 20 °C. The control circuit voltage limits are 0.85 to 1.1 Uc for pickup and 0.2 to 0.55 Uc for dropout at 55 °C. Operating time is 35 ms closing and 130 ms opening at rated control voltage. Plate-mount only — no DIN-rail clip on this frame. The footprint is 200.5 mm wide by 162 mm tall by 171 mm deep, so plan for a backplate or sub-panel with clearance for the 171 mm projection. Power terminals accept bar (up to 20 x 3 mm busbar) or lugs/ring terminals for up to 95 mm² cable; control terminals are screw-clamp for 1 to 4 mm². Tightening torque is 10 N·m on the power circuit and 1.2 N·m on the control circuit. IP2X finger protection on the front face requires the shrouds. Designed to IEC 60947-4-1 and EN 60947-4-1 for contactors and motor-starters, plus IEC 60947-1 and JIS C8201-4-1. Rated insulation voltage is 1000 V per IEC 60947-4-1 or 1500 V per VDE 0110 group C. Impulse withstand voltage is 8 kV, overvoltage category III. The protective treatment is TH (tropicalised) for humid environments. Altitude rating is 3000 m without derating.","metaTitle":"Schneider LC1F1154P7 TeSys F Contactor, 200 A AC-1, 4 NO, EO","metaDescription":"Schneider Electric LC1F1154P7 TeSys F 4-pole contactor, 200 A AC-1 at ≤440 V, 230 V AC coil. EOL lifecycle — sourced to order. Compliant IEC 60947-4-1.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"162 mm","Standards":"IEC 60947-4-1 EN 60947-4-1 EN 60947-1 IEC 60947-1 JIS C8201-4-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.37 mOhm - Ith 200 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Power circuit: 10 N.m Control circuit: 1.2 N.m","Compatibility code":"LC1F","Inrush power in VA":"770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"125 A aM at 200 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Power circuit: bar 2 cable(s) - busbar cross section: 20 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 95 mm² Power circuit: connector 1 cable(s) 95 mm² Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"920 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"15 W AC-1","[Uc] control circuit voltage":"230 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"200 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1100 A 40 °C - 10 s 640 A 40 °C - 30 s 520 A 40 °C - 1 min 400 A 40 °C - 3 min 320 A 40 °C - 10 min","[Ith] conventional free air thermal current":"200 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5ed38ca1a1d1ac79c23b100a802901a7.pdf","sourceUrl":"https://www.se.com/ie/en/product/LC1F1154P7/tesys-f-contactor-4p-4-no-ac1-440-v-200-a-coil-230-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1154P7/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider provide for the LC1F1154P7?","answer":"The contactor is designed to IEC 60947-4-1, EN 60947-4-1, IEC 60947-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V (IEC) or 1500 V (VDE 0110 group C). The manufacturer typically provides a declaration of conformity covering these standards; request it with your RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1154P7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1154P7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}