{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1154Q7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1154Q7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1154Q7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1154Q7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F1154Q7, 4-pole contactor, 200 A rated operational current in AC-1 utilisation category at ≤ 440 V, 380 V AC 40-400 Hz control circuit voltage, plate mount.","salesMarkdown":"The Schneider Electric LC1F1154Q7 is a TeSys F 4-pole contactor rated for 200 A in AC-1 utilisation category (resistive loads) at ≤ 440 V, with a 380 V AC 40-400 Hz coil. This is a heavy-duty power contactor for switching resistive heating elements, lighting banks, or transformer primaries where the AC-1 rating governs — not for motor starting (that would be AC-3). The 4 NO power pole configuration and 200 A continuous current mean it handles substantial resistive loads without derating up to 40 °C ambient. Mounts to a plate — not DIN rail, so factor in panel drilling and hardware. The power circuit uses bolted connections; terminals accept bar (20 x 3 mm busbar), lugs (1 x 95 mm² cable), or connectors (1 x 95 mm²). Control circuit uses screw clamp terminals accepting 1-4 mm² flexible or solid. Tightening torque: 10 N·m on power circuit, 1.2 N·m on control circuit. Dimensions: 200.5 mm wide, 162 mm high, 171 mm deep. IP2X front face with shrouds — basic finger protection, not washdown-rated. Rated breaking capacity is 920 A per IEC 60947-4-1. Mechanical durability is 10 million cycles. Operating time: 35 ms closing, 130 ms opening at rated control voltage. Heat dissipation is 5.9-7.2 W total, with 15 W per pole in AC-1 duty. Average impedance is 0.37 mΩ at Ith 200 A, 50 Hz. Inrush power consumption is 770 VA, hold-in is 8.1 VA at 20 °C. Control voltage limits: pick-up 0.85-1.1 Uc, drop-out 0.2-0.55 Uc at 55 °C. Rated insulation voltage is 1000 V per IEC 60947-4-1, 1500 V per VDE 0110 group C. Impulse withstand voltage is 8 kV. Operating altitude: 3000 m without derating. Ambient temperature range: -40 to 60 °C operating, -60 to 80 °C storage. Overvoltage category III. Protective treatment TH. Associated fuse ratings: 125 A aM or 200 A gG at ≤ 440 V. Maximum operating rate: 2400 cycles/hour at 55 °C.","metaTitle":"Schneider LC1F1154Q7 TeSys F Contactor, 4P 200A AC-1, 380V C","metaDescription":"Schneider LC1F1154Q7 TeSys F 4-pole contactor, 200A AC-1, 380V AC coil. EOL lifecycle. Sourced to order against RFQ. IEC/EN/JIS rated. Plate mount.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"162 mm","Standards":"JIS C8201-4-1 EN 60947-1 EN 60947-4-1 IEC 60947-1 IEC 60947-4-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.37 mOhm - Ith 200 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Power circuit: 10 N.m Control circuit: 1.2 N.m","Compatibility code":"LC1F","Inrush power in VA":"770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"125 A aM at 200 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Power circuit: bar 2 cable(s) - busbar cross section: 20 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 95 mm² Power circuit: connector 1 cable(s) 95 mm² Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"920 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"15 W AC-1","[Uc] control circuit voltage":"380 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"200 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1100 A 40 °C - 10 s 640 A 40 °C - 30 s 520 A 40 °C - 1 min 400 A 40 °C - 3 min 320 A 40 °C - 10 min","[Ith] conventional free air thermal current":"200 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f4c50c03e532c63643ef95afccf1bae0.pdf","sourceUrl":"https://www.se.com/za/en/product/LC1F1154Q7/tesys-f-contactor-4p-4-no-ac1-440-v-200-a-coil-380-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1154Q7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy LC1F1154Q7?","answer":"The LC1F1154Q7 is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm position."},{"question":"What are the key ratings of LC1F1154Q7?","answer":"The LC1F1154Q7 is a 4-pole contactor rated 200 A in AC-1 (resistive loads) at ≤ 440 V, with a 380 V AC 40-400 Hz coil. It has a rated breaking capacity of 920 A per IEC 60947-4-1 and mechanical durability of 10 million cycles."},{"question":"What is LC1F1154Q7's mounting and dimensions?","answer":"The LC1F1154Q7 mounts to a plate (not DIN rail). Dimensions are 200.5 mm wide, 162 mm high, and 171 mm deep. Power circuit uses bolted connections; control circuit uses screw clamp terminals."},{"question":"What standards does LC1F1154Q7 comply with?","answer":"The LC1F1154Q7 complies with JIS C8201-4-1, EN 60947-1, EN 60947-4-1, IEC 60947-1, and IEC 60947-4-1. It carries an IP2X front face protection rating with shrouds."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1154Q7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1154Q7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}