{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1154U7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1154U7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1154U7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1154U7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F1154U7, 4-pole contactor, 200 A AC-1 at ≤440 V, 240 VAC 40-400 Hz coil, plate mount.","salesMarkdown":"## TeSys F 4-pole contactor, 200 A AC-1 — EOL sourcing note The Schneider Electric LC1F1154U7 is a TeSys F 4-pole contactor rated 200 A in AC-1 utilisation category at ≤440 V, making it suited for switching resistive loads like heater banks or lighting in industrial panels. The coil is 240 V AC 40-400 Hz, with a closing time of 35 ms and opening at 130 ms at nominal voltage. This part is in end-of-life (EOL) phase per the manufacturer lifecycle status. The 200 A AC-1 rating at ≤440 V governs resistive loads — this is not a motor-starting (AC-3) contactor. For motor duty, the AC-1 figure would derate significantly; use the part only for the utilisation category stated. The 4 NO pole configuration (4 normally open power poles) suits applications requiring four independent load circuits, each rated for the full 200 A under AC-1 conditions. Heat dissipation runs 5.9 to 7.2 W total, with 15 W per pole in AC-1 duty — factor this into enclosure thermal calculations. The contactor is plate-mounted, not DIN-rail, so panel layout must accommodate bolted fixing. Rated insulation voltage is 1000 V per IEC 60947-4-1, with an impulse withstand of 8 kV. Overvoltage category III means it is suitable for fixed-installation distribution boards. The IP2X front-face protection (with shrouds) meets IEC 60529 and VDE 0106 for finger-safe touch protection. The LC1F1154U7 is certified to IEC 60947-4-1, EN 60947-1, EN 60947-4-1, and JIS C8201-4-1. It carries protective treatment TH for tropical environments. Ambient operating range is -40 to 60 °C, storage -60 to 80 °C, and altitude up to 3000 m without derating.","metaTitle":"Schneider Electric LC1F1154U7 TeSys F Contactor, 200 A AC-1,","metaDescription":"Schneider Electric LC1F1154U7 TeSys F 4-pole contactor. 200 A AC-1 at ≤440 V, 240 VAC coil. EOL phase; sourced to order against RFQ. IEC 60947-4-1.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"162 mm","Standards":"IEC 60947-4-1 EN 60947-1 JIS C8201-4-1 EN 60947-4-1 IEC 60947-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.37 mOhm - Ith 200 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Power circuit: 10 N.m Control circuit: 1.2 N.m","Compatibility code":"LC1F","Inrush power in VA":"770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"125 A aM at 200 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Power circuit: bar 2 cable(s) - busbar cross section: 20 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 95 mm² Power circuit: connector 1 cable(s) 95 mm² Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"920 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"15 W AC-1","[Uc] control circuit voltage":"240 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"200 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1100 A 40 °C - 10 s 640 A 40 °C - 30 s 520 A 40 °C - 1 min 400 A 40 °C - 3 min 320 A 40 °C - 10 min","[Ith] conventional free air thermal current":"200 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c718ea4c7b3c113f0ee6b90a5f2fcf31.pdf","sourceUrl":"https://www.se.com/vn/en/product/LC1F1154U7/tesys-f-contactor-4p-4-no-ac1-440-v-200-a-coil-240-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1154U7/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Schneider Electric provide for LC1F1154U7?","answer":"The contactor is certified to IEC 60947-4-1, EN 60947-1, EN 60947-4-1, and JIS C8201-4-1. It carries protective treatment TH for tropical environments and is rated IP2X front-face with shrouds per IEC 60529 and VDE 0106."},{"question":"Where can I buy LC1F1154U7?","answer":"The LC1F1154U7 is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commitment."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1154U7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1154U7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}