{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1504B7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1504B7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1504B7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1504B7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F1504B7, 4-pole contactor, 250 A rated operational current (AC-3 at ≤440 V), 75 kW motor power at 400 V AC, 24 V AC 40–400 Hz coil, plate mounting, IP2X front face.","salesMarkdown":"The LC1F1504B7 is a TeSys F 4-pole contactor from Schneider Electric, rated 250 A in AC-3 duty at ≤440 V — that is the motor-switching current, not the resistive-heater current. For a 400 V three-phase induction motor, it handles 75 kW (AC-3); at 415 V it carries 80 kW, and at 690 V it goes to 100 kW. The coil is 24 V AC, 40–400 Hz, with a pickup range of 0.85–1.1 Uc and dropout between 0.2–0.55 Uc at 55 °C. Closing time is 35 ms, opening 130 ms — fast enough for most motor-start sequences but not for a safety stop without a separate auxiliary contact block. The contactor is certified to IEC 60947-4-1 and IEC 60947-1, plus JIS C8201-4-1. That means the rated breaking capacity of 1200 A and the rated insulation voltage of 1000 V (1500 V per VDE 0110 group C) are verified under the standard's test conditions. Overvoltage category III suits fixed-installation distribution panels. Mounting is plate-mount (not DIN rail). Dimensions: 170 mm height, 163.5 mm width, 171 mm depth. The power circuit uses bolted connections or bar connections (25 x 3 mm busbar); control circuit uses screw-clamp terminals accepting 1–4 mm² flexible or solid wire. Tightening torque: 18 N·m on the power side, 1.2 N·m on the control side. The front face achieves IP2X with shrouds per IEC 60529 and VDE 0106 — basic finger protection, not washdown-rated. ## Environmental and durability Altitude rating is 3000 m without derating. Heat dissipation runs 5.9–7.2 W total; power dissipation per pole is 22 W in AC-1 and 8 W in AC-3. The coil hold-in consumption is 6.6–8.1 VA at 20 °C. Protective treatment is TH (tropicalized).","metaTitle":"Schneider Electric LC1F1504B7 TeSys F Contactor, 250 A AC-3,","metaDescription":"Schneider Electric LC1F1504B7 TeSys F 4-pole contactor. Rated 250 A AC-3, 75 kW at 400 V. 24 V AC 40-400 Hz coil. Certified to IEC 60947-4-1. End-of-life status; sourced to order a","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"163.5 mm","Height":"170 mm","Standards":"EN 60947-4-1 EN 60947-1 IEC 60947-4-1 JIS C8201-4-1 IEC 60947-1","Motor power kW":"75 kW at 380...400 V AC 50/60 Hz (AC-3) 80 kW at 415 V AC 50/60 Hz (AC-3) 80 kW at 440 V AC 50/60 Hz (AC-3) 90 kW at 500 V AC 50/60 Hz (AC-3) 100 kW at 660...690 V AC 50/60 Hz (AC-3) 40 kW at 220...230 V AC 50/60 Hz (AC-3) 22 kW at 400 V AC 50/60 Hz (AC-4)","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.35 mOhm - Ith 250 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 18 N.m","Compatibility code":"LC1F","Inrush power in VA":"690...855 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-3 AC-1 AC-4","Contactor application":"Resistive load Motor control","Mechanical durability":"10 Mcycles","Associated fuse rating":"160 A aM at 250 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 120 mm² Power circuit: connector 1 cable(s) 120 mm² Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"1200 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"22 W AC-1 8 W AC-3","[Uc] control circuit voltage":"24 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"250 A (at 150 A (at <55 °C) at <= 440 V AC-3","[Ue] rated operational voltage":"<= 690 V AC 50/60 Hz","Hold-in power consumption in VA":"6.6...8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 40 °C - 10 s 700 A 40 °C - 30 s 600 A 40 °C - 1 min 450 A 40 °C - 3 min 350 A 40 °C - 10 min","[Ith] conventional free air thermal current":"250 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b3e1e8397627910cbb0a13a42a45e685.pdf","sourceUrl":"https://www.se.com/be/en/product/LC1F1504B7/tesys-f-contactor-4p-4-no-ac3-440-v-150-a-coil-24-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1504B7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy LC1F1504B7?","answer":"This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time."},{"question":"What are the key ratings of LC1F1504B7?","answer":"Rated operational current 250 A AC-3 at ≤440 V; motor power 75 kW at 400 V AC (AC-3); coil 24 V AC 40–400 Hz; certified to IEC 60947-4-1."},{"question":"What compliance documentation is available for LC1F1504B7?","answer":"The contactor is certified to IEC 60947-4-1, IEC 60947-1, and JIS C8201-4-1. Rated insulation voltage 1000 V per IEC 60947-4-1, 1500 V per VDE 0110 group C. Overvoltage category III. Protective treatment TH (tropicalized)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1504B7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1504B7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}