{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1504F7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1504F7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1504F7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1504F7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F series, LC1F1504F7 contactor, 4-pole, 250 A AC-1 at ≤440 V, 110 V AC 40-400 Hz coil, plate mount.","salesMarkdown":"The Schneider Electric LC1F1504F7 is a TeSys F series 4-pole contactor rated for 250 A in AC-1 utilisation category (resistive load) at ≤440 V, with a 110 V AC 40-400 Hz control coil. It switches resistive loads like heaters or lighting banks, not motor starts — the AC-1 rating means it handles steady-state current without the inrush a motor draws. The 4 NO power poles give you four independent make contacts in one package, useful for switching multiple load circuits or a three-phase plus neutral. The 8 kV impulse withstand voltage (Uimp) and overvoltage category III rating tell you it's designed for fixed-installation distribution panels, not sensitive electronics. Mechanical durability of 10 million cycles gives a long service life in lightly cycled applications; at the maximum operating rate of 2400 cycles/hour at 55 °C, that's over 4000 hours of continuous switching if you push it that hard. Plate-mounted, not DIN-rail — the 200.5 mm width and 171 mm depth mean it needs a backplate or sub-panel with clearance for the power circuit bolted connections (bar, lugs, or connector up to 120 mm² cable). Control wiring uses screw clamp terminals accepting 1 to 4 mm² flexible or solid. Torque the power connections to 18 N·m and control connections to 1.2 N·m. The IP2X front face with shrouds meets finger-probe protection per IEC 60529 and VDE 0106, so it's safe for open-panel mounting with the shrouds fitted. Operates from -40 to 60 °C ambient, stores from -60 to 80 °C, and runs at altitudes up to 3000 m without derating. The TH protective treatment means it's tropicalised for humid environments. Standards compliance covers IEC 60947-4-1, EN 60947-4-1, and JIS C8201-4-1 — the core contactor standard for switching and protection. Rated insulation voltage is 1000 V per IEC 60947-4-1, with a 1500 V rating per VDE 0110 group C.","metaTitle":"Schneider TeSys F LC1F1504F7 Contactor, 250 A AC-1, 110 VAC","metaDescription":"Schneider Electric TeSys F LC1F1504F7 4-pole contactor, 250 A rated operational current (AC-1), 110 VAC 40-400 Hz coil. End-of-life status; sourced to order against RFQ. IEC/EN 609","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"170 mm","Standards":"IEC 60947-4-1 JIS C8201-4-1 EN 60947-1 IEC 60947-1 EN 60947-4-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.35 mOhm - Ith 250 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 18 N.m","Compatibility code":"LC1F","Inrush power in VA":"770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"160 A aM at 250 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 120 mm² Power circuit: connector 1 cable(s) 120 mm² Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"1200 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"22 W AC-1","[Uc] control circuit voltage":"110 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"250 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 40 °C - 10 s 700 A 40 °C - 30 s 600 A 40 °C - 1 min 450 A 40 °C - 3 min 350 A 40 °C - 10 min","[Ith] conventional free air thermal current":"250 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e6fa6d3aafc210570785d09fd19349ce.pdf","sourceUrl":"https://www.se.com/ae/en/product/LC1F1504F7/tesys-f-contactor-4p-4-no-ac1-440-v-250-a-coil-110-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1504F7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy the LC1F1504F7?","answer":"We can source and quote the LC1F1504F7 to order against an RFQ through our independent distribution network. Availability and current pricing are confirmed at quote time."},{"question":"What is the rated operational current of the LC1F1504F7?","answer":"The LC1F1504F7 is rated for 250 A at ≤440 V in AC-1 utilisation category (resistive load). This is the steady-state current it can carry, not a motor-starting rating."},{"question":"What compliance documentation does the LC1F1504F7 meet?","answer":"The LC1F1504F7 complies with IEC 60947-4-1, EN 60947-4-1, JIS C8201-4-1, IEC 60947-1, and EN 60947-1. It carries a rated insulation voltage of 1000 V per IEC 60947-4-1 and 1500 V per VDE 0110 group C."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1504F7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1504F7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}