{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1504G7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1504G7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1504G7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1504G7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F1504G7, 4-pole contactor, 250 A AC-1, 120 V AC 50/60 Hz coil, plate mount, end-of-life status.","salesMarkdown":"The Schneider Electric LC1F1504G7 is a TeSys F 4-pole contactor rated 250 A in AC-1 utilisation category (resistive load) at ≤ 440 V, 40 °C ambient. That 250 A figure governs the continuous current the main poles can carry when switching resistive loads like heaters or lighting banks — not motor starting. For motor duty (AC-3), the contactor would derate; the spec table lists AC-1 only, so this unit is sized for resistive switching, not inductive motor loads. The 120 V AC control coil (40–400 Hz) pulls 770 VA inrush, holds at 8.1 VA. Coil drop-out range is 0.2–0.55 Uc, so it releases reliably on a sagging line. Mounting is plate-only — no DIN-rail clip. The 171 mm depth and 200.5 mm width mean it occupies a panel footprint comparable to a small frame breaker; plan for bolted power connections (bar or lug, up to 120 mm² cable). Control wiring uses screw-clamp terminals accepting 1–4 mm² flexible or solid. The contactor carries approvals to EN 60947-1, IEC 60947-4-1, and JIS C8201-4-1, with rated insulation voltage 1000 V per IEC 60947-4-1 and 1500 V per VDE 0110 group C. Impulse withstand is 8 kV. ## Integration notes Plate-mount the contactor on a flat panel surface; the 170 mm height and 200.5 mm width leave clearance for power busbars (25 x 3 mm bar or ring terminals). Tighten power circuit connections to 18 N·m, control circuit to 1.2 N·m. The IP2X front face with shrouds meets IEC 60529 and VDE 0106 for finger protection — no additional guarding needed in a closed panel. Heat dissipation runs 5.9–7.2 W total; each pole dissipates 22 W in AC-1 duty. At 55 °C ambient, the maximum operating rate is 2400 cycles per hour. Mechanical durability is 10 million cycles. For fuse protection, use 160 A aM or 250 A gG at ≤ 440 V.","metaTitle":"Schneider LC1F1504G7 TeSys F Contactor, 250 A AC-1, 4P, 120","metaDescription":"Schneider Electric LC1F1504G7 TeSys F 4-pole contactor, 250 A AC-1, 120 VAC coil. End-of-life (EOL) — sourced to order against RFQ. IEC 60947-4-1, 1000 V insulation.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"170 mm","Standards":"EN 60947-1 IEC 60947-4-1 JIS C8201-4-1 IEC 60947-1 EN 60947-4-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.35 mOhm - Ith 250 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 18 N.m","Compatibility code":"LC1F","Inrush power in VA":"770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"160 A aM at 250 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 120 mm² Power circuit: connector 1 cable(s) 120 mm² Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"1200 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"22 W AC-1","[Uc] control circuit voltage":"120 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"250 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 40 °C - 10 s 700 A 40 °C - 30 s 600 A 40 °C - 1 min 450 A 40 °C - 3 min 350 A 40 °C - 10 min","[Ith] conventional free air thermal current":"250 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4e31bbe7f17812aa2f02e09fd5de3f61.pdf","sourceUrl":"https://www.se.com/th/en/product/LC1F1504G7/tesys-f-contactor-4p-4-no-ac1-440-v-250-a-coil-120-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1504G7/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1504G7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1504G7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}