{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F1504P7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F1504P7","canonicalUrl":"https://aoctrl.com/schneider/LC1F1504P7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F1504P7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F1504P7, 4-pole contactor, 250 A AC-1, 230 VAC 50/60 Hz coil, plate mount, EOL lifecycle.","salesMarkdown":"## TeSys F LC1F1504P7 — 250 A Resistive-Load Contactor, 4 NO, 230 VAC Coil The Schneider Electric TeSys F LC1F1504P7 is a 4-pole contactor rated for 250 A in AC-1 duty (resistive loads) at up to 440 VAC, with a 230 VAC 50/60 Hz control coil. It carries four normally-open power poles and is designed for plate mounting in industrial control panels. Rated breaking capacity is 1200 A per IEC 60947-4-1, and the contactor is certified to IEC 60947-4-1, IEC 60947-1, EN 60947-1, EN 60947-4-1, and JIS C8201-4-1. The rated insulation voltage is 1000 V (IEC) or 1500 V (VDE 0110 group C), with an impulse withstand voltage of 8 kV. The contactor dissipates 5.9 to 7.2 W total heat, with 22 W per pole in AC-1 service. ## Lifecycle & Sourcing — EOL Notice Active For a direct replacement, a parametric cross-reference within the TeSys F family should be evaluated based on the required AC-1 current rating, pole count, and control voltage. The LC1F1504P7 uses a 230 VAC 50/60 Hz coil; any substitute must match this coil voltage and the 4 NO pole configuration. ## AC-1 Duty & Application Context Rated at 250 A in AC-1 utilisation category, this contactor is specified for resistive loads — heating elements, lighting banks, or transformer primary switching where inrush is minimal. The AC-1 rating is the thermal current (Ith) at 50 Hz, with an average impedance of 0.35 mOhm per pole. For motor loads (AC-3 duty), a different TeSys F variant would be required; this unit is not rated for inductive motor starting. Associated fuse protection is specified at 160 A aM (motor-circuit) or 250 A gG (general-purpose) at up to 440 V. Mounting is by plate (not DIN rail), with dimensions of 171 mm depth, 200.5 mm width, and 170 mm height. Power circuit connections accept bar (25 x 3 mm busbar), ring-terminal lugs up to 120 mm², or bolted connections. Control circuit wiring uses screw-clamp terminals accepting 1 to 4 mm² flexible or solid wire. Front-face protection is IP2X with shrouds fitted (per IEC 60529 and VDE 0106). The contactor is treated with TH protective coating for tropical/humid environments. Control circuit operates on AC at 40 to 400 Hz. Inrush power is 770 VA at cos φ 0.9 (20 °C), dropping to 8.1 VA hold-in power. The coil drops out between 20% and 55% of rated control voltage, ensuring reliable opening on undervoltage conditions.","metaTitle":"TeSys F LC1F1504P7 Contactor, 250 A AC-1, 4 NO, 230 VAC Coil","metaDescription":"Schneider Electric TeSys F LC1F1504P7 contactor, 250 A rated operational current (AC-1), 4 NO poles, 230 VAC 50/60 Hz coil. EOL notice active — sourced to order against RFQ. IEC 60","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"200.5 mm","Height":"170 mm","Standards":"IEC 60947-4-1 IEC 60947-1 EN 60947-1 EN 60947-4-1 JIS C8201-4-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"5.9...7.2 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.35 mOhm - Ith 250 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 18 N.m","Compatibility code":"LC1F","Inrush power in VA":"770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"160 A aM at 250 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 120 mm² Power circuit: connector 1 cable(s) 120 mm² Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"1200 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"22 W AC-1","[Uc] control circuit voltage":"230 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"250 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 40 °C - 10 s 700 A 40 °C - 30 s 600 A 40 °C - 1 min 450 A 40 °C - 3 min 350 A 40 °C - 10 min","[Ith] conventional free air thermal current":"250 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/85f562bd15b81cc310e94211a97d5692.pdf","sourceUrl":"https://www.se.com/th/en/product/LC1F1504P7/tesys-f-contactor-4p-4-no-ac1-440-v-250-a-coil-230-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F1504P7/alternatives.json"},"ai":{"faq":[{"question":"What is the closest alternative to LC1F1504P7?","answer":"No official successor order code is listed. A direct replacement would need to match the 250 A AC-1 rating, 4 NO poles, 230 VAC 50/60 Hz coil, and plate-mount form factor within the TeSys F family. A parametric cross-reference should be evaluated for the specific application."},{"question":"What are the key ratings of LC1F1504P7?","answer":"Rated operational current is 250 A in AC-1 (resistive load) at up to 440 VAC, with a 230 VAC 50/60 Hz control coil. It has 4 NO power poles, rated breaking capacity of 1200 A per IEC 60947-4-1, and mechanical durability of 10 million cycles."},{"question":"How do I get pricing and availability for LC1F1504P7?","answer":"The LC1F1504P7 is sourced through independent distribution channels. Submit an RFQ for current pricing and availability — both are confirmed at quote time. No stock or price figures are published on this listing."},{"question":"What compliance standards does LC1F1504P7 meet?","answer":"Certified to IEC 60947-4-1, IEC 60947-1, EN 60947-1, EN 60947-4-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V per IEC (1500 V per VDE 0110 group C), with impulse withstand voltage of 8 kV. Front-face protection is IP2X with shrouds."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F1504P7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F1504P7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}