{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F150D5","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F150D5","canonicalUrl":"https://aoctrl.com/schneider/LC1F150D5","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F150D5","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F contactor, LC1F150D5, 3-pole, 250 A rated operational current, 42 V AC 50 Hz coil, plate mount, end-of-life phase.","salesMarkdown":"It carries a rated operational current of 250 A (AC-3 at ≤ 440 V) and switches motors up to 75 kW at 400 V AC (AC-3 duty). The coil pulls 42 V AC at 50 Hz, with an inrush of 550 VA and a hold-in draw of 45 VA — standard for this frame size. That 250 A AC-3 rating is the number that matters for motor starting: it governs the contactor's ability to make and break inductive loads under full locked-rotor current. For resistive loads (AC-1), the thermal current Ith is also 250 A, so the same contactor handles heater banks or lighting without derating. Rated breaking capacity sits at 1200 A per IEC 60947-4-1, and the contactor complies with EN 60947-4-1, IEC 60947-4-1, and JIS C8201-4-1 — so it's accepted across European and Japanese panel standards. If you're sourcing for a BOM line that needs a drop-in replacement, the closest functional match would be a TeSys F contactor with the same 250 A AC-3 rating and a 42 VAC 50 Hz coil — but verify the mounting footprint and auxiliary wiring before committing the line. Mounts to a plate — no DIN rail adapter on this frame. The contactor measures 170 mm high, 163.5 mm wide, and 171 mm deep. Power connections accept bar (25 x 3 mm busbar), ring-terminal lugs (120 mm² cable), or bolted connection. Control wiring uses screw-clamp terminals accepting 1 to 4 mm² flexible or solid. Tighten power terminals to 18 N·m, control terminals to 1.2 N·m. Front face achieves IP2X with shrouds fitted (per IEC 60529 and VDE 0106). The TH protective treatment means it's suitable for tropical environments — no extra conformal coating needed for high-humidity panels. ## Operating conditions and derating Runs from -40 to 60 °C ambient, stores from -60 to 80 °C. No derating required up to 3000 m altitude. Maximum operating rate is 2400 cycles per hour at 55 °C. Heat dissipation runs 12 to 16 W total; per-pole dissipation is 22 W in AC-1 and 8 W in AC-3.","metaTitle":"Schneider Electric LC1F150D5 TeSys F Contactor, 250 A, 42 VA","metaDescription":"Schneider Electric LC1F150D5 TeSys F contactor. 250 A rated operational current, 75 kW motor power at 400 V AC-3. 42 VAC 50 Hz coil. End-of-life phase — sourced to order against RF","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"163.5 mm","title":"LC1F150D5","Height":"170 mm","Standards":"JIS C8201-4-1 EN 60947-4-1 EN 60947-1 IEC 60947-4-1 IEC 60947-1","description":"TeSys F contactor - 3P (3 NO) - AC-3 - <= 440 V 250 A - coil 42 V AC","Motor power kW":"75 kW at 380...400 V AC 50/60 Hz (AC-3) 80 kW at 415 V AC 50/60 Hz (AC-3) 80 kW at 440 V AC 50/60 Hz (AC-3) 90 kW at 500 V AC 50/60 Hz (AC-3) 100 kW at 660...690 V AC 50/60 Hz (AC-3) 40 kW at 220...230 V AC 50/60 Hz (AC-3) 22 kW at 400 V AC 50/60 Hz (AC-4)","Operating time":"23...35 ms closing 5...15 ms opening","lifecycle_stage":"eol_hot","Heat dissipation":"12...16 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.35 mOhm - Ith 250 A 50 Hz","Device short name":"LC1F","Poles description":"3P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 18 N.m","Compatibility code":"LC1F","Inrush power in VA":"550 VA, 50 Hz cos phi 0.3 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 50 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-3 AC-1 AC-4","Contactor application":"Motor control Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"160 A aM at 250 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 120 mm² Power circuit: connector 1 cable(s) 120 mm² Power circuit: bolted connection","IP degree of protection":"IP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106","Rated breaking capacity":"1200 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"22 W AC-1 8 W AC-3","[Uc] control circuit voltage":"42 V AC 50 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 50/60 Hz (at 55 °C) Drop-out: 0.35...0.55 Uc 50/60 Hz (at 55 °C)","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"250 A (at 150 A (at <55 °C) at <= 440 V AC-3","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"45 VA, 50 Hz cos phi 0.3 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 40 °C - 10 s 700 A 40 °C - 30 s 600 A 40 °C - 1 min 450 A 40 °C - 3 min 350 A 40 °C - 10 min","[Ith] conventional free air thermal current":"250 A (at 40 °C)","Permissible ambient air temperature around the device":"60...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c8e472b80cdfafa485776fad396a71a0.pdf","sourceUrl":"https://www.se.com/be/en/product/LC1F150D5/tesys-f-contactor-3p-3-no-ac3-440-v-250-a-coil-42-v-ac/"},"ai":{"faq":[{"question":"Where can I buy the LC1F150D5?","answer":"The LC1F150D5 is available to quote to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock count or price can be stated here."},{"question":"What are the key ratings for the LC1F150D5?","answer":"Rated operational current is 250 A at ≤ 440 V AC-3. Motor power reaches 75 kW at 400 V AC (AC-3). Coil is 42 V AC 50 Hz. Rated breaking capacity is 1200 A per IEC 60947-4-1."},{"question":"What standards does the LC1F150D5 comply with?","answer":"It complies with IEC 60947-4-1, EN 60947-4-1, IEC 60947-1, EN 60947-1, and JIS C8201-4-1. The front face with shrouds meets IP2X per IEC 60529 and VDE 0106."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F150D5","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F150D5 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}