{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F2254P7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F2254P7","canonicalUrl":"https://aoctrl.com/schneider/LC1F2254P7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F2254P7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F2254P7, 4-pole contactor, 315 A AC-1 at ≤440 V, 230 V AC 40–400 Hz coil, plate mount, end-of-life status.","salesMarkdown":"The Schneider Electric LC1F2254P7 is a TeSys F contactor with four normally-open power poles, rated for 315 A in AC-1 utilisation category (resistive load) at ≤440 V, 50/60 Hz. The 230 V AC control coil (40–400 Hz) draws 1070 VA inrush and 9.9 VA hold. It's a plate-mount part, not a DIN-rail snap-on — plan for bolted or busbar connections on the power side and screw-clamp terminals on the control side. The 315 A AC-1 rating is the resistive-load current at ≤440 V and <40 °C. The 4 NO poles are all make-and-break; there are no NC auxiliary poles built in. The 35 ms closing / 130 ms opening times (at rated control voltage) are typical for a contactor this size — expect a longer drop-out delay than a smaller frame, which matters if you're coordinating with fast-acting protection. Standards compliance to IEC 60947-4-1 and EN 60947-4-1 means the part is certified for contactor duty under those international norms. Rated insulation voltage is 1000 V (IEC 60947-4-1) and impulse withstand is 8 kV, so it can live in a 690 VAC panel with proper clearances. Mounts to a plate (not DIN rail). Dimensions: 197 mm high, 208.5 mm wide, 181 mm deep. Power circuit connections accept bar (busbar cross-section up to 32 x 4 mm), ring-lug terminals up to 185 mm², or bolted connection. Control circuit uses screw-clamp terminals for 1–4 mm² flexible or solid wire. Tightening torque: 35 N·m on the power side, 1.2 N·m on the control side. The TH protective treatment means it's suitable for tropical environments (humid, warm).","metaTitle":"Schneider Electric LC1F2254P7 TeSys F Contactor, 315 A AC-1,","metaDescription":"Schneider Electric LC1F2254P7 TeSys F contactor, 315 A AC-1 at 440 V, 4 NO poles, 230 V AC coil. End-of-life (EOL hot). Sourced to order against RFQ. Standards IEC/EN 60947-4-1.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"181 mm","Range":"TeSys","Width":"208.5 mm","Height":"197 mm","Standards":"EN 60947-4-1 IEC 60947-4-1 JIS C8201-4-1 IEC 60947-1 EN 60947-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"8...9.8 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.32 mOhm - Ith 315 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 35 N.m","Compatibility code":"LC1F","Inrush power in VA":"1070 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"315 A gG at 250 A aM at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 32 x 4 mm Power circuit: lugs-ring terminals 1 cable(s) 185 mm² Power circuit: connector 1 cable(s) 185 mm² Power circuit: bolted connection","IP degree of protection":"IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106","Rated breaking capacity":"1800 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"32 W AC-1","[Uc] control circuit voltage":"230 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"315 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 690 V AC 50/60 Hz","Hold-in power consumption in VA":"9.9 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-5...55 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1800 A 40 °C - 10 s 1000 A 40 °C - 30 s 850 A 40 °C - 1 min 560 A 40 °C - 3 min 440 A 40 °C - 10 min","[Ith] conventional free air thermal current":"315 A (at 40 °C)","Permissible ambient air temperature around the device":"-40...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4e349dc5e2388b42c27a264c14c0153b.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1F2254P7/tesys-f-contactor-4p-4-no-ac1-440-v-315-a-coil-230-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F2254P7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy LC1F2254P7?","answer":"This part is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock or price figures are published here."},{"question":"What is the AC-1 rating of LC1F2254P7?","answer":"315 A at ≤440 V, <40 °C, for resistive loads. That is the rated operational current in AC-1 utilisation category per IEC 60947-4-1."},{"question":"What compliance standards does LC1F2254P7 meet?","answer":"It complies with IEC 60947-4-1, EN 60947-4-1, IEC 60947-1, EN 60947-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V (IEC) / 1500 V (VDE 0110 group C); impulse withstand 8 kV."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F2254P7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F2254P7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}