{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F2254V7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F2254V7","canonicalUrl":"https://aoctrl.com/schneider/LC1F2254V7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F2254V7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F series, LC1F2254V7, 4-pole contactor, 315 A AC-1 at ≤440 V, 400 V AC 40–400 Hz coil, plate mount.","salesMarkdown":"The Schneider Electric TeSys F LC1F2254V7 is a 4-pole contactor rated for 315 A in AC-1 utilisation category (resistive load) at ≤440 V, 50/60 Hz. The 400 V AC control coil operates at 40–400 Hz with a closing time of 35 ms and opening time of 130 ms at rated control voltage. It is designed for plate mounting and carries IEC 60947-4-1, EN 60947-4-1, and JIS C8201-4-1 compliance. The 315 A AC-1 rating governs resistive loads — heaters, lighting banks, or transformer primaries where inrush is minimal. The 4 NO (normally open) power pole configuration means all four poles switch the load; there are no built-in auxiliary contacts. The 400 V AC coil is a non-standard control voltage in many panels (common are 110 V, 230 V, or 24 V DC), so verify the control transformer or PLC output matches before specifying. The plate-mount form factor (181 mm depth, 208.5 mm width, 197 mm height) requires a dedicated backplate or sub-panel — not a standard DIN rail. ## Deployment Context This contactor is sized for industrial control panels switching resistive loads up to 315 A. The plate-mount design and IP20 front face (with shrouds) suit enclosed panel installation where personnel access is limited to qualified electricians. Power circuit connections accept bar, lug-ring, or bolted terminations up to 185 mm² cable or 32×4 mm busbar — typical for main feeder or large heater bank switching. The 8–9.8 W heat dissipation (32 W per pole in AC-1 duty) must be factored into the panel thermal budget to avoid derating at elevated ambient temperatures.","metaTitle":"Schneider TeSys F LC1F2254V7 Contactor, 315 A AC-1, 4 NO, 40","metaDescription":"Schneider Electric TeSys F LC1F2254V7 4-pole contactor. 315 A rated operational current AC-1, 400 V AC coil. EOL hot — sourced to order. IEC 60947-4-1. Request quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"181 mm","Range":"TeSys","Width":"208.5 mm","Height":"197 mm","Standards":"IEC 60947-1 EN 60947-4-1 IEC 60947-4-1 JIS C8201-4-1 EN 60947-1","Operating time":"35 ms closing (at Uc) 130 ms opening (at Uc)","lifecycle_stage":"eol_hot","Heat dissipation":"8...9.8 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.32 mOhm - Ith 315 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 35 N.m","Compatibility code":"LC1F","Inrush power in VA":"1070 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Associated fuse rating":"315 A gG at 250 A aM at <= 440 V","Maximum operating rate":"2400 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 32 x 4 mm Power circuit: lugs-ring terminals 1 cable(s) 185 mm² Power circuit: connector 1 cable(s) 185 mm² Power circuit: bolted connection","IP degree of protection":"IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106","Rated breaking capacity":"1800 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"32 W AC-1","[Uc] control circuit voltage":"400 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"315 A (at <40 °C) at <= 440 V AC-1","[Ue] rated operational voltage":"<= 690 V AC 50/60 Hz","Hold-in power consumption in VA":"9.9 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-5...55 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1800 A 40 °C - 10 s 1000 A 40 °C - 30 s 850 A 40 °C - 1 min 560 A 40 °C - 3 min 440 A 40 °C - 10 min","[Ith] conventional free air thermal current":"315 A (at 40 °C)","Permissible ambient air temperature around the device":"-40...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a5c7b9d0d2ba38ceee4606d3c526cf32.pdf","sourceUrl":"https://www.se.com/th/en/product/LC1F2254V7/tesys-f-contactor-4p-4-no-ac1-440-v-315-a-coil-400-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F2254V7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy LC1F2254V7 and how do I get a price?","answer":"The LC1F2254V7 is sourced and quoted to order through independent distribution. Submit an RFQ for current availability and pricing — confirmed at quote time, not from a shelf count."},{"question":"What is the closest alternative to LC1F2254V7 in the TeSys F family?","answer":"Within the TeSys F family, a functionally similar 4-pole contactor with the same 315 A AC-1 rating but a different control voltage (e.g., 230 V AC or 24 V DC coil) would be the closest parametric match. No pin-compatible drop-in replacement is confirmed; verify the coil voltage and mounting footprint before substituting."},{"question":"What compliance documentation does Schneider provide for LC1F2254V7?","answer":"The LC1F2254V7 is certified to IEC 60947-4-1, EN 60947-4-1, JIS C8201-4-1, and carries a rated impulse withstand voltage of 8 kV (overvoltage category III). The front face with shrouds achieves IP20 per IEC 60529 and VDE 0106."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F2254V7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F2254V7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}