{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F2600F7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F2600F7","canonicalUrl":"https://aoctrl.com/schneider/LC1F2600F7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F2600F7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F2600F7, 3-pole contactor, 2600 A AC-1, 110 V AC 40-400 Hz coil, plate mount, IP20 front face with shrouds.","salesMarkdown":"The 110 V AC control coil operates across 40-400 Hz and pulls 2500 VA inrush, holding at 45 VA. Mounts to a plate, not a DIN rail — at 519 mm wide and 382 mm tall, this is a panel-floor or backplate install, sized for the busbar connection (power circuit bar accepts up to 100 x 10 mm bus). AC-1 at 2600 A is the headline number — this contactor is not for motor starting (that would be AC-3, which would be lower). The associated fuse recommendation is 2500 A gG at ≤440 V — size that accordingly. Coil hold-in voltage drops out between 0.3 and 0.5 Uc (33-55 V AC for a 110 V coil) — that's a wide dropout band, typical for large contactors, but means you need clean control power to avoid nuisance drop. Operating time is 40-80 ms close, 100-200 ms open — not a fast-switching device; sequence timing in a control scheme should account for that. Heat dissipation is 40 W total, but each pole dissipates 250 W under AC-1 load — that's 750 W total across three poles. The panel ventilation must handle that; the -5 to 40 °C operating ambient is the limit, and altitude derating starts above 3000 m. Certified to EN 60947-4-1, IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1. Rated insulation voltage 1000 V, impulse withstand 8 kV, overvoltage category III. IP20 front face with shrouds per IEC 60529 and VDE 0106 — protected against finger contact from the front, but the terminals are live; panel door interlock is standard practice. ## Integration notes Plate mount only — no DIN-rail adapter. Control circuit screw terminals accept 1-4 mm² flexible or solid, one or two cables, with or without ferrule. Power circuit uses bar connection: three cables or busbar up to 100 x 10 mm. Tightening torque: control circuit 1.2 N·m, power circuit 58 N·m — that is a high torque; use a torque wrench and the correct hex bit. Storage temperature range -60 to 80 °C covers warehouse extremes.","metaTitle":"Schneider LC1F2600F7 TeSys F Contactor, 2600 A AC-1, 110 V A","metaDescription":"Schneider Electric LC1F2600F7 TeSys F contactor, 2600 A AC-1, 110 V AC coil, 3-pole. EOL hot — sourced to order against RFQ. UL/CSA/IEC certified.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"251 mm","Range":"TeSys","Width":"519 mm","Height":"382 mm","Standards":"EN 60947-4-1 IEC 60947-1 IEC 60947-4-1 EN 60947-1 JIS C8201-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1","Operating time":"40...80 ms closing 100...200 ms opening","lifecycle_stage":"eol_hot","Heat dissipation":"40 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.1 mOhm - Ith 2600 A 50 Hz","Device short name":"LC1F","Poles description":"3P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 58 N.m","Compatibility code":"LC1F","Inrush power in VA":"2500 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Associated fuse rating":"2500 A gG at <= 440 V","Maximum operating rate":"600 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 3 cable(s) - busbar cross section: 100 x 10 mm","IP degree of protection":"IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106","Rated breaking capacity":"3900 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"250 W AC-1","[Uc] control circuit voltage":"110 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1000 V conforming to UL 60947-4-1","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.3...0.5 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"2600 A (at <60 °C) AC AC-1","[Ue] rated operational voltage":"<= 1000 V AC 50/60 Hz","Hold-in power consumption in VA":"45 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-5...40 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"12000 A 40 °C - 10 s 9000 A 40 °C - 30 s 7000 A 40 °C - 1 min 6000 A 40 °C - 3 min 4000 A 40 °C - 10 min","[Ith] conventional free air thermal current":"2600 A (at 60 °C)","Permissible ambient air temperature around the device":"-40...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a8e17c6b76562ef255010bd507810f8b.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1F2600F7/tesys-f-contactor-3p-3-no-ac1-1000-v-ac-2600-a-coil-110-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F2600F7/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for LC1F2600F7?","answer":"Submit an RFQ through this listing. We confirm current pricing and availability at quote time from independent distribution channels — no stock or price is shown on the page because the market moves daily on an EOL part."},{"question":"What compliance documentation does this brand provide for LC1F2600F7?","answer":"The contactor carries UL, CSA, IEC, EN, and JIS certifications per the standards listed. RoHS and REACH compliance are standard for Schneider TeSys products, though the specific declaration for this order code should be requested at quote time."},{"question":"What is LC1F2600F7's listed depth?","answer":"The depth is 251 mm. Combined with the 519 mm width and 382 mm height, plan for a large backplate footprint — not a crowded enclosure fit."},{"question":"What is the closest alternative to LC1F2600F7 in the TeSys F family?","answer":"The official successor within the TeSys F range uses the same LC1F mechanical platform but with a different suffix for the control voltage and coil type. The exact cross-reference depends on whether you need the same 110 V AC 40-400 Hz coil or can adapt to a different control voltage. We can help identify the right current-production order code against an RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F2600F7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F2600F7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}