{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F2600R7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F2600R7","canonicalUrl":"https://aoctrl.com/schneider/LC1F2600R7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F2600R7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F2600R7, 3-pole contactor, 2600 A AC-1, 440 V AC 40...400 Hz coil, plate mount, EOL hot stage.","salesMarkdown":"## What the 2600 A AC-1 rating means for fit AC-1 means the contacts close and open at near-unity power factor, so the switching duty is lighter than AC-3 (motor) or AC-4 (plugging/inching), but the continuous current is the headline number. At 2600 A, this is a big-frame contactor — plate-mounted, not DIN-rail — sized for main feeder or large resistive bank switching in industrial power distribution. The control circuit is AC at 40...400 Hz, 440 V nominal, with a pickup range of 0.85...1.1 Uc and dropout at 0.3...0.5 Uc. Inrush power hits 2500 VA at 20 °C; hold-in drops to 45 VA. That coil draw matters for control transformer sizing — expect a momentary surge on closure, then a light hold. ## Standards and approvals — what they certify The LC1F2600R7 carries certifications to EN 60947-4-1, IEC 60947-4-1, UL 60947-4-1, and CSA C22.2 No 60947-4-1 — the core contactor standards for industrial control equipment. These cover the rated operational current, breaking capacity, short-time withstand, and impulse voltage withstand. ## Mounting and integration — plate mount, big footprint Mounting support is plate — no DIN-rail clip on this frame. Dimensions: 519 mm wide, 382 mm high, 251 mm deep. Power circuit connections are via busbar, accepting three cables per pole with a busbar cross-section of 100 x 10 mm. Control circuit uses screw clamp terminals accepting 1...4 mm² flexible or solid. Tightening torque on the power circuit is 58 N.m — that's substantial, requiring a torque wrench. ## Short-time withstand and breaking capacity Rated breaking capacity is 3900 A per IEC 60947-4-1. Short-time withstand current (Icw) is 12 kA for 10 seconds, 9 kA for 30 seconds, 7 kA for 1 minute, 6 kA for 3 minutes, and 4 kA for 10 minutes — all at 40 °C. That Icw profile tells you the contactor can ride through a fault for coordination with upstream protection; the associated fuse recommendation is 2500 A gG at ≤ 440 V. Heat dissipation is 40 W total, with 250 W per pole in AC-1 duty — that's the heat you need to vent from the enclosure.","metaTitle":"Schneider Electric LC1F2600R7 TeSys F Contactor, 2600 A AC-1","metaDescription":"Schneider Electric LC1F2600R7 TeSys F contactor. 2600 A AC-1, 3-pole, 440 V AC coil. EOL hot stage. Sourced to order against RFQ. UL, CSA, IEC certified.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"251 mm","Range":"TeSys","Width":"519 mm","Height":"382 mm","Standards":"EN 60947-4-1 IEC 60947-1 IEC 60947-4-1 EN 60947-1 JIS C8201-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1","Operating time":"40...80 ms closing 100...200 ms opening","lifecycle_stage":"eol_hot","Heat dissipation":"40 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.1 mOhm - Ith 2600 A 50 Hz","Device short name":"LC1F","Poles description":"3P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 58 N.m","Compatibility code":"LC1F","Inrush power in VA":"2500 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Associated fuse rating":"2500 A gG at <= 440 V","Maximum operating rate":"600 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 3 cable(s) - busbar cross section: 100 x 10 mm","IP degree of protection":"IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106","Rated breaking capacity":"3900 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"250 W AC-1","[Uc] control circuit voltage":"440 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1000 V conforming to UL 60947-4-1","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.3...0.5 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"2600 A (at <60 °C) AC AC-1","[Ue] rated operational voltage":"<= 1000 V AC 50/60 Hz","Hold-in power consumption in VA":"45 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-5...40 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"12000 A 40 °C - 10 s 9000 A 40 °C - 30 s 7000 A 40 °C - 1 min 6000 A 40 °C - 3 min 4000 A 40 °C - 10 min","[Ith] conventional free air thermal current":"2600 A (at 60 °C)","Permissible ambient air temperature around the device":"-40...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4f7daa206d002f5fc2e478f547b6b66a.pdf","sourceUrl":"https://www.se.com/vn/en/product/LC1F2600R7/tesys-f-contactor-3p-3-no-ac1-1000-v-ac-2600-a-coil-440-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F2600R7/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for LC1F2600R7?","answer":"Submit an RFQ. The part is sourced to order through independent distribution channels; current pricing and stock position are confirmed at quote time. No online price or stock count is published for this EOL-stage part."},{"question":"What compliance documentation does Schneider provide for LC1F2600R7?","answer":"The contactor is certified to EN 60947-4-1, IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V (IEC and UL). The evidence does not list RoHS or REACH declarations; request those from the supplier at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F2600R7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F2600R7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}