{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F2600W7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F2600W7","canonicalUrl":"https://aoctrl.com/schneider/LC1F2600W7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F2600W7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F2600W7, 3-pole contactor, 2600 A AC-1, 277 V AC 40-400 Hz coil, plate mount, IP20 front face.","salesMarkdown":"## What the 2600 A AC-1 rating means for fit The Schneider Electric LC1F2600W7 is a 3-pole contactor from the TeSys F range, rated 2600 A in AC-1 utilisation category — that is the resistive-load current it can make and break continuously at up to 60 °C ambient. AC-1 covers heaters, ovens, and non-inductive loads; for motor duty (AC-3) this contactor is not the right fit. The 277 V AC control coil operates across 40-400 Hz, with a hold-in draw of 45 VA and an inrush of 2500 VA. Plate-mounted, it occupies 519 mm width by 382 mm height by 251 mm depth — sized for a large panel or enclosure backplate. Rated insulation voltage 1000 V, impulse withstand 8 kV, overvoltage category III. Complies with EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1. The front face with shrouds achieves IP20 per IEC 60529 and VDE 0106. Protective treatment TH is applied for tropical environments. Mounts on a plate (not DIN rail). Power circuit connections use bars accepting up to 3 cables with a busbar cross-section of 100 x 10 mm. Control circuit terminals are screw clamp, accepting 1 to 4 mm² flexible or solid wire. Tightening torque: 1.2 N·m for control, 58 N·m for power. The 251 mm depth must be accounted for in enclosure depth planning, especially with cable bending radius behind the contactor. ## Short-circuit and withstand coordination Associated fuse rating is 2500 A gG at ≤ 440 V. Rated short-time withstand current (Icw) is 12,000 A for 10 s, 9000 A for 30 s, 7000 A for 1 min, 6000 A for 3 min, and 4000 A for 10 min — all at 40 °C. Rated breaking capacity is 3900 A per IEC 60947-4-1. These figures guide the upstream protection device selection.","metaTitle":"Schneider Electric LC1F2600W7 TeSys F Contactor, 2600 A AC-1","metaDescription":"Schneider Electric LC1F2600W7 TeSys F contactor, 2600 A AC-1 rated operational current, 277 V AC 40-400 Hz coil. EOL hot status. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"251 mm","Range":"TeSys","Width":"519 mm","Height":"382 mm","Standards":"EN 60947-4-1 IEC 60947-1 IEC 60947-4-1 EN 60947-1 JIS C8201-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1","Operating time":"40...80 ms closing 100...200 ms opening","lifecycle_stage":"eol_hot","Heat dissipation":"40 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.1 mOhm - Ith 2600 A 50 Hz","Device short name":"LC1F","Poles description":"3P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 58 N.m","Compatibility code":"LC1F","Inrush power in VA":"2500 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Associated fuse rating":"2500 A gG at <= 440 V","Maximum operating rate":"600 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 3 cable(s) - busbar cross section: 100 x 10 mm","IP degree of protection":"IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106","Rated breaking capacity":"3900 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"250 W AC-1","[Uc] control circuit voltage":"277 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1000 V conforming to UL 60947-4-1","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.3...0.5 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"2600 A (at <60 °C) AC AC-1","[Ue] rated operational voltage":"<= 1000 V AC 50/60 Hz","Hold-in power consumption in VA":"45 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-5...40 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"12000 A 40 °C - 10 s 9000 A 40 °C - 30 s 7000 A 40 °C - 1 min 6000 A 40 °C - 3 min 4000 A 40 °C - 10 min","[Ith] conventional free air thermal current":"2600 A (at 60 °C)","Permissible ambient air temperature around the device":"-40...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d982ffcf592983f8dc946d48f6240396.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1F2600W7/tesys-f-contactor-3p-3-no-ac1-1000-v-ac-2600-a-coil-277-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F2600W7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy LC1F2600W7 and how do I get a price?","answer":"The LC1F2600W7 is sourced to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm quote."},{"question":"What is the closest alternative to LC1F2600W7 in the TeSys F family?","answer":"No official successor order code is listed. For a current-production alternative, evaluate a TeSys F contactor with similar AC-1 current rating and 277 V AC coil voltage. A parametric cross-reference is recommended to confirm mounting, terminal, and performance match."},{"question":"What is LC1F2600W7's depth?","answer":"The LC1F2600W7 has a depth of 251 mm."},{"question":"What compliance documentation does Schneider Electric provide for LC1F2600W7?","answer":"The LC1F2600W7 complies with EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1. The front face with shrouds meets IP20 per IEC 60529 and VDE 0106. Protective treatment TH is applied. RoHS/REACH documentation should be available from the manufacturer or distributor upon request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F2600W7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F2600W7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}