{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F2654L7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F2654L7","canonicalUrl":"https://aoctrl.com/schneider/LC1F2654L7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F2654L7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F LC1F2654L7, 4-pole contactor, 350 A AC-1 at ≤440 V, 208 V AC 40-400 Hz coil, plate mount, IP20 front face with shrouds.","salesMarkdown":"The Schneider Electric LC1F2654L7 is a TeSys F 4-pole contactor rated for 350 A in AC-1 utilisation category (resistive load) at ≤440 V, 40 °C. The 208 V AC 40-400 Hz coil pulls 650 VA inrush, holds at 10 VA. This is a plate-mounted, open-style contactor — no enclosure, intended for panel integration where the installer provides the backplate and shrouds for IP20 front-face protection. The 350 A AC-1 rating governs resistive loads like heaters or lighting banks. For motor duty (AC-3), the contactor would derate — the evidence does not list an AC-3 figure, so size it from the motor full-load current and the manufacturer's AC-3 table for the TeSys F frame. The 8 W heat dissipation (37 W per pole in AC-1) needs to be factored into the panel thermal budget — at full load the contactor dumps about 148 W total into the enclosure. Control circuit is AC 40-400 Hz, with a drop-out range of 0.15 to 0.2 Uc — meaning the coil releases when voltage falls to about 31-42 V on a 208 V nominal. The operating limits (0.85-1.1 Uc) ensure reliable pick-up even with line sag. The coil is screw-clamp terminated, accepting 1-4 mm² flexible or solid wire. The contactor carries IEC 60947-1, IEC 60947-4-1, EN 60947-4-1, EN 60947-1, and JIS C8201-4-1 certification. Rated insulation voltage is 1000 V per IEC 60947-4-1 (1500 V per VDE 0110 group C). Overvoltage category III. Protective treatment TH (tropicalisation) is standard. Mounting is plate (not DIN rail). Power circuit termination uses bolted bars or lugs accepting up to 240 mm² cable; tightening torque is 35 N·m on the power side. Control circuit uses screw-clamp terminals, 1.2 N·m. Dimensions: 8.0 in (203 mm) high, 9.6 in (244.5 mm) wide, 8.4 in (213 mm) deep. The IP20 front face requires the supplied shrouds to be fitted.","metaTitle":"Schneider LC1F2654L7 TeSys F Contactor, 350 A AC-1, 208 V AC","metaDescription":"Schneider Electric LC1F2654L7 TeSys F 4-pole contactor. 350 A rated operational current (AC-1), 208 V AC 40-400 Hz coil. EOL lifecycle; sourced to order against RFQ. IEC/EN/JIS cer","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"8.4 in (213 mm)","Range":"TeSys","Width":"9.6 in (244.5 mm)","Height":"8.0 in (203 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","Standards":"IEC 60947-1 IEC 60947-4-1 JIS C8201-4-1 EN 60947-4-1 EN 60947-1","Operating time":"40...65 ms closing 100...170 ms opening","lifecycle_stage":"eol_hot","Heat dissipation":"8 W","Mounting Support":"Plate","Range of Product":"TeSys F","Average impedance":"0.3 mOhm - Ith 350 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit 10.6 lbf.in (1.2 N.m) Power circuit 309.8 lbf.in (35 N.m)","Compatibility code":"LC1F","Inrush power in VA":"650 VA, 40...400 Hz 0.9 68 °F (20 °C))","Operating altitude":"9842.52 ft (3000 m) without derating","Control circuit type":"AC 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"10 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"315 A aM at 400 A gG at <= 440 V","Maximum operating rate":"2400 cyc/h 131 °F (55 °C)","Connections - terminals":"Control circuit screw clamp terminals 1 0.002...0.006 in² (1...4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.002...0.006 in² (1...4 mm²)flexible without cable end Control circuit screw clamp terminals 1 0.002...0.006 in² (1...4 mm²)flexible with cable end Control circuit screw clamp terminals 2 0.002...0.004 in² (1...2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.002...0.006 in² (1...4 mm²)solid without cable end Control circuit screw clamp terminals 2 0.002...0.006 in² (1...4 mm²)solid without cable end Power circuit bar 2 32 x 4 mm Power circuit lugs-ring terminals 1 0.4 in² (240 mm²) Power circuit connector 1 0.4 in² (240 mm²) Power circuit bolted connection","IP degree of protection":"IP20 front face with shrouds IEC 60529 IP20 front face with shrouds VDE 0106","Rated breaking capacity":"2120 A conforming to IEC 60947-4-1","Product or Component Type":"Contactor","Power dissipation per pole":"37 W AC-1","[Uc] control circuit voltage":"208 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V IEC 60947-4-1 1500 V VDE 0110 group C","Control circuit voltage limits":"Operational 0.85...1.1 Uc 40...400 Hz 131 °F (55 °C)) Drop-out 0.15...0.2 Uc 40...400 Hz 131 °F (55 °C))","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"350 A (at <104 °F (40 °C)) at <= 440 V AC AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"10 VA, 40...400 Hz 0.9 68 °F (20 °C))","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"23...131 °F (-5...55 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"2200 A 104 °F (40 °C) - 10 s 1230 A 104 °F (40 °C) - 30 s 950 A 104 °F (40 °C) - 1 min 620 A 104 °F (40 °C) - 3 min 480 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"350 A (at 104 °F (40 °C))","Permissible ambient air temperature around the device":"-40...158 °F (-40...70 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/076d323956926cbdaca0616773202e61.pdf","sourceUrl":"https://www.se.com/be/en/product/LC1F2654L7/tesys-f-contactor-4p-4-no-ac1-440-v-350-a-coil-208-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F2654L7/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to LC1F2654L7?","answer":"The evidence does not list a direct pin-compatible replacement. A parametric substitute from the TeSys F family would need to match the 350 A AC-1 rating, 4-pole NO configuration, plate mount, and 208 V AC coil. Contact us with your BOM for cross-reference support."},{"question":"What compliance documentation does this brand provide for LC1F2654L7?","answer":"The contactor is certified to IEC 60947-1, IEC 60947-4-1, EN 60947-4-1, EN 60947-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V (IEC) / 1500 V (VDE 0110 group C). Protective treatment TH (tropicalisation) is standard. RoHS/REACH documentation is typically available from Schneider's product compliance portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F2654L7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F2654L7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}