{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1F6304FE7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1F6304FE7","canonicalUrl":"https://aoctrl.com/schneider/LC1F6304FE7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1F6304FE7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F series, LC1F6304FE7, 4-pole contactor, 1000 A AC-1, 115 V AC 50/60 Hz coil, plate mount.","salesMarkdown":"The Schneider Electric TeSys F LC1F6304FE7 is a 4-pole power contactor rated for 1000 A in AC-1 utilisation category (resistive load) at up to 440 V AC, with a 115 V AC 50/60 Hz control coil. This is a heavy-duty, plate-mounted contactor sized for large resistive heating banks, furnace control, or distribution switching where the load current is continuous and non-inductive. The 4 NO power pole configuration means all four poles close together — no built-in auxiliary contacts, so plan for an external auxiliary block if you need status feedback to the PLC. The headline number is 1000 A at ≤440 V AC in AC-1. AC-1 covers resistive loads — heaters, ovens, incandescent lighting — where the current inrush is near the steady-state value. Do not apply this contactor to motor starting (AC-3) or mixed loads without derating; the TeSys F range has separate AC-3 rated variants for that duty. The 115 V AC coil holds between 0.85 and 1.1 Uc and drops out between 0.25 and 0.5 Uc — verify your control transformer sizing, especially if the line voltage sags under heavy load. The 20 W heat dissipation at rated current means the panel ventilation must clear that thermal load; plate mounting on a steel backplate helps conduct heat away. Plate-mounted — no DIN rail clip. The power circuit uses bar-type terminals accepting up to 60 x 5 mm busbars, typical for 1000 A class switchgear. Control circuit wiring is screw-clamp, 1 to 4 mm² flexible or solid. Tightening torque: 58 N.m on the power connections, 1.2 N.m on the control circuit. The IP20 front face with shrouds meets IEC 60529 and VDE 0106 for finger-safe front-of-panel access, but the rear terminals are live when the contactor is closed — enclosure required. Designed and tested to IEC 60947-4-1, EN 60947-4-1, and JIS C8201-4-1. The rated insulation voltage is 1000 V per IEC 60947-4-1, 1500 V per VDE 0110 group C. Impulse withstand voltage is 8 kV, overvoltage category III — suitable for fixed-installation distribution panels. The TH protective treatment indicates tropicalisation for humid environments.","metaTitle":"Schneider TeSys F LC1F6304FE7 Contactor, 1000 A AC-1, 115 VA","metaDescription":"Schneider Electric TeSys F LC1F6304FE7 4-pole contactor, 1000 A rated operational current (AC-1), 115 VAC 50/60 Hz coil. End-of-life status; sourced to order against RFQ. IEC/EN 60","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"255 mm","Range":"TeSys","Width":"389 mm","Height":"304 mm","Standards":"EN 60947-4-1 JIS C8201-4-1 IEC 60947-4-1 EN 60947-1 IEC 60947-1","Operating time":"40...80 ms closing 100...200 ms opening","lifecycle_stage":"eol_hot","Heat dissipation":"20 W","Mounting support":"Plate","Range of product":"TeSys F","Average impedance":"0.12 mOhm - Ith 1000 A 50 Hz","Device short name":"LC1F","Poles description":"4P","Tightening torque":"Control circuit: 1.2 N.m Power circuit: 58 N.m","Compatibility code":"LC1F","Inrush power in VA":"1650 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Operating altitude":"3000 m without derating","Control circuit type":"AC at 40...400 Hz","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1","Contactor application":"Resistive load","Mechanical durability":"5 Mcycles","Associated fuse rating":"1000 A gG at 630 A aM at <= 440 V","Maximum operating rate":"1200 cyc/h 55 °C","Connections - terminals":"Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 60 x 5 mm","IP degree of protection":"IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106","Rated breaking capacity":"5040 A conforming to IEC 60947-4-1","Product or component type":"Contactor","Power dissipation per pole":"120 W AC-1","[Uc] control circuit voltage":"115 V AC 40...400 Hz","[Ui] rated insulation voltage":"1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.25...0.5 Uc 40...400 Hz (at 55 °C)","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"1000 A (at <40 °C) at <= 440 V AC AC-1","[Ue] rated operational voltage":"<= 460 V DC","Hold-in power consumption in VA":"22 VA, 40...400 Hz cos phi 0.9 (at 20 °C)","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-5...55 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"5050 A 40 °C - 10 s 4400 A 40 °C - 30 s 3400 A 40 °C - 1 min 2200 A 40 °C - 3 min 1600 A 40 °C - 10 min","[Ith] conventional free air thermal current":"1000 A (at 40 °C) 1250 A","Permissible ambient air temperature around the device":"-40...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7018a4002e873587613f2e8fd4b49a27.pdf","sourceUrl":"https://www.se.com/sg/en/product/LC1F6304FE7/tesys-f-contactor-4p-4-no-ac1-440-v-1000-a-coil-115-v-ac/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1F6304FE7/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy LC1F6304FE7 and what is the lead time?","answer":"We source this end-of-life contactor through our independent distribution network. It is quoted to order against an RFQ; availability and current pricing are confirmed at quote time. Submit an RFQ for a firm lead-time estimate."},{"question":"What is the rated operational current of LC1F6304FE7?","answer":"1000 A in AC-1 utilisation category at ≤440 V AC, at an ambient temperature below 40 °C. This is a resistive-load rating; do not apply at this current level for motor or inductive loads without consulting the AC-3 derating curve."},{"question":"What is the control coil voltage for LC1F6304FE7?","answer":"115 V AC, 40 to 400 Hz. The coil operates between 0.85 and 1.1 Uc and drops out between 0.25 and 0.5 Uc at 55 °C."},{"question":"What compliance standards does LC1F6304FE7 meet?","answer":"The contactor is designed to IEC 60947-4-1, EN 60947-4-1, and JIS C8201-4-1. Rated insulation voltage is 1000 V per IEC 60947-4-1 and 1500 V per VDE 0110 group C. Impulse withstand is 8 kV, overvoltage category III."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1F6304FE7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1F6304FE7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}