{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1G800XXEN","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1G800XXEN","canonicalUrl":"https://aoctrl.com/schneider/LC1G800XXEN","factsUrl":"https://aoctrl.com/api/mcp/products/LC1G800XXEN","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Giga LC1G800XXEN, 3-pole contactor, 335 kW at 400 V AC (AC-3e), 800 A frame, plate mount.","salesMarkdown":"The LC1G800XXEN is a 3-pole contactor from the TeSys Giga range, rated for motor switching at 335 kW on a 400 V AC line in AC-3e duty — that's the utilisation category for standard squirrel-cage motors with occasional inrush. The same frame carries 700 hp at 460/480 V 60 Hz for North American installs, so the part covers both IEC and NEMA motor tables from one BOM line. That matters when you're stacking contactors in a panel — the heat load adds up, and the 2.8 in (70 mm) connection pitch gives you room to route busbars without crowding the gland plate. The LC1G800XXEN is in its current lifecycle stage — still an active catalogue number, not a last-time-buy or NRND flag. That means you can spec it into a BOM freeze without worrying about a PCN-driven substitution mid-build. It carries approvals across EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1, so it passes inspection for panels shipping into Europe, North America, and Japan without a separate compliance review. Mounts on a plate — not a DIN rail — so plan for a drilled backplate or a mounting channel. The power circuit accepts bar connections up to 52 x 20 mm busbar or lugs for 185 mm² cable; the control circuit uses push-in terminals for 0.2 to 2.5 mm² solid or stranded with ferrules. Tightening torque on the main connections is 58 N.m (513.3 lbf.in). The built-in bidirectional peak limiting coil holds at 600 V AC/DC control voltage and draws 400 W inrush DC. That's a DC-powered coil, so if your control transformer is AC, you'll need a rectifier module or a separate DC supply. The closing time is 40 to 70 ms; opening is 15 to 50 ms. Auxiliary contacts are 1 NO + 1 NC built in — enough for a feedback loop to a PLC input or a seal-in circuit. For more aux contacts, you add a side-mount block from the TeSys Giga family.","metaTitle":"Schneider TeSys Giga LC1G800XXEN Contactor, 335 kW at 400 V","metaDescription":"Schneider Electric TeSys Giga LC1G800XXEN 3-pole contactor. Rated 335 kW at 400 V AC (AC-3e). Current lifecycle stage. UL/CSA/IEC certified. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Color":"Dark grey","Depth":"10.5 in (266 mm)","Range":"TeSys","Width":"8.3 in (211 mm)","title":"LC1G800XXEN","Height":"11.2 in (284 mm)","Category":"US10I1222329","Standards":"EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1 JIS C8201-5-1","description":"High power contactor,TeSys Giga,3P(3NO),AC-3 <=440V 800A,standard version,600V AC/DC coil","Motor power kW":"200 kW at 230 V AC 50/60 Hz (AC-3e) 335 kW at 400 V AC 50/60 Hz (AC-3e) 355 kW at 415 V AC 50/60 Hz (AC-3e) 375 kW at 440 V AC 50/60 Hz (AC-3e) 425 kW at 500 V AC 50/60 Hz (AC-3e) 560 kW at 690 V AC 50/60 Hz (AC-3e) 450 kW at 1000 V AC 50/60 Hz (AC-3e) 250 kW at 230 V AC 50/60 Hz (AC-3) 450 kW at 400 V AC 50/60 Hz (AC-3) 450 kW at 415 V AC 50/60 Hz (AC-3) 450 kW at 440 V AC 50/60 Hz (AC-3) 500 kW at 500 V AC 50/60 Hz (AC-3) 560 kW at 690 V AC 50/60 Hz (AC-3) 450 kW at 1000 V AC 50/60 Hz (AC-3) 200 kW at 230 V AC 50/60 Hz (AC-4) 375 kW at 400 V AC 50/60 Hz (AC-4) 355 kW at 415 V AC 50/60 Hz (AC-4) 375 kW at 440 V AC 50/60 Hz (AC-4) 400 kW at 500 V AC 50/60 Hz (AC-4) 475 kW at 690 V AC 50/60 Hz (AC-4) 400 kW at 1000 V AC 50/60 Hz (AC-4)","Operating time":"40...70 ms closing 15...50 ms opening","Coil technology":"Built-in bidirectional peak limiting","lifecycle_stage":"current","Connection pitch":"2.8 in (70 mm)","Mounting Support":"Plate","Range of Product":"TeSys Giga","Average impedance":"0.000065 Ohm","Device short name":"LC1G","Poles description":"3P","Tightening torque":"513.3 lbf.in (58 N.m)","Compatibility code":"LC1G","Overvoltage category":"III","Protective treatment":"TH","Utilisation category":"AC-1 AC-3 AC-3e AC-4 AC-5a AC-5b AC-6a AC-6b AC-8a AC-8b DC-1 DC-3 DC-5","Contactor application":"Power switching Motor control","Mechanical durability":"5 Mcycles","Mechanical robustness":"Vibrations 5...300 Hz 2 gn contactor open Vibrations 5...300 Hz 4 gn contactor closed Shocks 10 gn 11 ms contactor open Shocks 15 gn 11 ms contactor closed","Nbr. of units in pkg.":"1","Associated fuse rating":"800 A aM at 630 A aM at 1250 A gG at 1200 A UL Type L at <= 600 V","Maximum operating rate":"600 cyc/h AC-3 600 cyc/h AC-3e 300 cyc/h AC-1 150 cyc/h AC-4","inrush power in W (DC)":"400 W","Connections - terminals":"Power circuit: bar 2 - busbar cross section: 52 x 20 mm Power circuit: lugs-ring terminals 1 0.3 in² (185 mm²) Power circuit: bolted connection Control circuit: push-in 1 0.0003...0.004 in² (0.2...2.5 mm²) - cable stiffness: solid stranded without cable end Control circuit: push-in 1 0.0004...0.004 in² (0.25...2.5 mm²) - cable stiffness: flexible with cable end Control circuit: push-in 2 0.0008...0.002 in² (0.5...1.0 mm²) with cable end Control circuit: push-in 0.001...0.004 in² (0.75...2.5 mm²) - cable stiffness: solid stranded without cable end Control circuit: push-in 0.001...0.004 in² (0.75...2.5 mm²) - cable stiffness: flexible with cable end","IP degree of protection":"IP2X front face with shrouds IEC 60529 IP2X front face with shrouds VDE 0106","Rated breaking capacity":"5870 A at 440 V","Pole contact composition":"3 NO","Safety reliability level":"B10d = 100000 cycles contactor with nominal load EN/ISO 13849-1 B10d = 1800000 cycles contactor with mechanical load EN/ISO 13849-1","Product or Component Type":"Contactor","Irms rated making capacity":"7640 A at 440 V","Maximum Horse Power Rating":"300 hp at 200/208 V 60 Hz 350 hp at 230/240 V 60 Hz 700 hp at 460/480 V 60 Hz 800 hp at 575/600 V 60 Hz","Power dissipation per pole":"70 W AC-1 - Ith 1050 A 42 W AC-3 - Ith 800 A","[Uc] control circuit voltage":"600 V AC 50/60 Hz 600 V DC","Auxiliary contact composition":"1 NO + 1 NC","[Ui] rated insulation voltage":"1000 V","Control circuit voltage limits":"Operational: 0.8 Uc Min...1.1 Uc Max (at Drop-out: 0.1 Uc Max...0.45 Uc Min (at <140 °F (60 °C))","[Ie] rated operational current":"1050 A (at 800 A (at <140 °F (60 °C)) at <= 440 V AC-3","[Ue] rated operational voltage":"<= 460 V DC","inrush power in VA (50/60 Hz, AC)":"700 VA","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","hold-in power consumption in W (DC)":"11 W","Ambient Air Temperature for Operation":"-13...140 °F (-25...60 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"5.5 kA - 10 s 4.6 kA - 30 s 3.6 kA - 1 min 2.6 kA - 3 min 1.7 kA - 10 min","[Ith] conventional free air thermal current":"1050 A (at 104 °F (40 °C))","Permissible ambient air temperature around the device":"-40...158 °F (-40...70 °C) at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4,500.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/163334f4772e4f4a4fbead4291b115e0.pdf","sourceUrl":"https://www.se.com/us/en/product/LC1G800XXEN/high-power-contactortesys-giga3p3noac3-440v-800astandard-version600v-ac-dc-coil/"},"ai":{"faq":[{"question":"What compliance documentation does this contactor carry?","answer":"It is certified to EN/IEC 60947-4-1, EN/IEC 60947-5-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, and JIS C8201-4-1 / JIS C8201-5-1, covering European, North American, and Japanese regulatory requirements."},{"question":"What is the motor power rating at 400 V?","answer":"In AC-3e duty (standard motor starts), it is rated 335 kW at 400 V AC 50/60 Hz. In AC-3 duty the same voltage yields 450 kW."},{"question":"What are the physical dimensions?","answer":"Height 11.2 in (284 mm), width 8.3 in (211 mm), depth 10.5 in (266 mm). Color is dark grey."},{"question":"What is the closest alternative in the same family?","answer":"Within the TeSys Giga range, the LC1G800XXEN is the 800 A frame size. A smaller frame (e.g., 630 A) or larger frame (e.g., 1000 A) would be the parametric siblings, but pin compatibility depends on the mounting plate and busbar pattern — the 800 A frame has its own bolt-hole layout."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1G800XXEN","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1G800XXEN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}