{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1K06106SLS207","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1K06106SLS207","canonicalUrl":"https://aoctrl.com/schneider/LC1K06106SLS207","factsUrl":"https://aoctrl.com/api/mcp/products/LC1K06106SLS207","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys LC1K, 3-pole contactor, AC-3 motor control, 57 mm depth, 45 mm width, 58 mm height.","salesMarkdown":"## Part identity and class It is rated for utilisation category AC-3, AC-3e, and AC-4, which means it is designed for switching squirrel-cage motors — making and breaking running loads — and for occasional plugging or inching duty under AC-4. The part carries a current lifecycle status, so it remains a qualified line item for serial production BOMs without an imminent end-of-life trigger. The AC-3 rating governs the motor-switching capability: this contactor handles the inductive load of a running motor up to its rated current, with the inrush already accounted for in the standard. The 1.8 W heat dissipation at 20 °C (both inrush and hold-in power) is the thermal load the panel must shed — relevant when grouping multiple contactors in a sealed enclosure. Mechanical durability of 30 Mcycles and electrical durability of 1.3 Mcycles at 6 A AC-3 (Ue ≤ 440 V) give a realistic service life for high-cycle packaging or material-handling lines. The 3 NO power pole configuration with a single instantaneous 1 NO auxiliary contact covers basic three-phase motor control with one feedback or status signal. The coil includes an integral suppression device, so no external flyback diode or RC snubber is needed across the coil terminals — one less component on the BOM and one less failure point during commissioning. Standards compliance spans EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, GB/T 14048.4, and JIS C8201-4-1, so the part is accepted in panels destined for North America, Europe, China, and Japan without a separate qualification step. Power circuit connections use lugs-ring terminals (external diameter 7 mm) tightened to 0.8...1.3 N·m with a 3.2 mm flat or Philips No 2 screwdriver. The 0.5 mm non-overlap distance between poles is the physical clearance to maintain — verify adjacent wiring doesn't bridge that gap. Operating altitude is 2000 m without derating — above that, consult the thermal derating curve for the coil hold-in voltage.","metaTitle":"Schneider Electric LC1K06106SLS207 TeSys Contactor, AC-3 Mot","metaDescription":"Schneider Electric TeSys LC1K06106SLS207 3-pole contactor. AC-3 rated for motor control, 57 mm depth. Current lifecycle. UL/CSA/IEC compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"57 mm","Range":"TeSys","Width":"45 mm","Height":"58 mm","Standards":"EN/IEC 60947-4-1 GB/T 14048.4 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1","Operating time":"10...20 ms coil de-energisation and NO opening 30...40 ms coil energisation and NO closing","Product weight":"0.235 kg","Coil technology":"With integral suppression device","lifecycle_stage":"current","Flame retardance":"V0 conforming to UL 94","Heat dissipation":"1.8 W","Mounting support":"Rail Plate","Device short name":"LC1K","Inrush power in W":"1.8 W (at 20 °C)","Poles description":"3P","Tightening torque":"Power circuit: 0.8...1.3 N.m - on lugs-ring terminals - with screwdriver 3.2 mm flat Ø 6 mm Power circuit: 0.8...1.3 N.m - on lugs-ring terminals - with screwdriver 3.2 mm Philips No 2","Device application":"Control","Operating altitude":"2000 m without derating","Non overlap distance":"0.5 mm","Protective treatment":"TC conforming to IEC 60068 TC conforming to DIN 50016","Utilisation category":"AC-3 AC-3e AC-4","Contactor application":"Motor control","Electrical durability":"1.3 Mcycles 6 A AC-3 at Ue <= 440 V","Mechanical durability":"30 Mcycles","Mechanical robustness":"Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6","Maximum operating rate":"3600 cyc/h","Auxiliary contacts type":"type instantaneous 1 NO","Connections - terminals":"Power circuit: lugs-ring terminals (external diameter: 7 mm)","IP degree of protection":"IP20 conforming to VDE 0106","Safety reliability level":"B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1","Minimum switching current":"5 mA for signalling circuit","Minimum switching voltage":"17 V for signalling circuit","Product or component type":"Contactor","Signalling circuit frequency":"<= 400 Hz","Control circuit voltage limits":"Operational: 0.7...1.3 Uc (at Drop-out: >= 0.10 Uc (at <50 °C)","Hold-in power consumption in W":"1.8 W at 20 °C","Power Pole Contact Composition":"3 NO","[Ue] rated operational voltage":"Power circuit: Signalling circuit: 10 MOhm for signalling circuit","Ambient air temperature for storage":"-50...80 °C","Permissible ambient air temperature around the device":"-40...70 °C at Uc"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d16ff320296199ed850680d4fc5ad4f4.pdf","sourceUrl":"https://www.se.com/vn/en/product/LC1K06106SLS207/contactor-tesys-k-3p-ac3-440v-6a-1no-aux-72v-dc-low-consumption-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/LC1K06106SLS207/alternatives.json"},"ai":{"faq":[{"question":"What standards does this contactor comply with?","answer":"It complies with EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, GB/T 14048.4, and JIS C8201-4-1. This covers panel acceptance in North America, Europe, China, and Japan without separate qualification."},{"question":"What are the key dimensions for panel layout?","answer":"Width is 45 mm, depth is 57 mm, height is 58 mm. The 45 mm width matches standard DIN-rail spacing for grouping multiple contactors."},{"question":"Does this contactor need an external coil suppression circuit?","answer":"No. The coil includes an integral suppression device, so no external flyback diode, RC snubber, or varistor is required across the coil terminals."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1K06106SLS207","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1K06106SLS207 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}