{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"LC1K06107F7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"LC1K06107F7","canonicalUrl":"https://aoctrl.com/schneider/LC1K06107F7","factsUrl":"https://aoctrl.com/api/mcp/products/LC1K06107F7","rawCanonicalId":null},"summary":{"shortDescription":"Square D TeSys[R] LC1K06107F7, IEC magnetic contactor, non-reversing, open enclosure, 3-pole, 110 VAC at 50/60 Hz coil, 6 A AC-3 inductive / 15 A AC-1 resistive, 1NO aux, slip-on terminals.","salesMarkdown":"The 110 VAC at 50/60 Hz coil pulls in cleanly across both line frequencies, so it lands in panels fed from either 50 Hz or 60 Hz mains without a coil swap. Rated 6 A in AC-3 duty (inductive motor loads) and 15 A in AC-1 (resistive loads), it covers small pumps, fans, conveyors, and heater banks up to those currents. The slip-on terminals accept push-on connectors for the coil and power wiring — speeds up panel wiring and replacement compared to screw-clamp terminations. The built-in 1NO auxiliary contact gives a feedback signal for PLC input or a holding-circuit interlock without bolting on a separate aux block. Motor horsepower coverage: 0.5 HP at 115 VAC single-phase, 1.5 HP at 230 VAC single-phase, 1.5 HP at 200/230 VAC three-phase, and 3 HP at 460/575 VAC three-phase. That 3 HP at 575 VAC rating is the one to check if the plant runs 575 V distribution — many contactors in this frame size top out at 460 V. The IEC construction standard means it follows IEC 60947-4-1 for contactors and motor starters, so it coordinates with IEC-rated overload relays and short-circuit protection devices.","metaTitle":"Square D LC1K06107F7 TeSys Contactor, 110VAC Coil, 6A AC-3,","metaDescription":"Square D LC1K06107F7 TeSys IEC contactor, 110 VAC 50/60 Hz coil, 6 A AC-3 / 15 A AC-1, 3-pole non-reversing, 1NO aux. Current production, sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Contactors"],"specifications":{"UPC":"78590164151","Type":"NON REVERSING","Model":"LC1K","title":"LC1K06107F7","Category":"Iec Contactors","Enclosure":"OPEN","Brand Name":"TeSys[R]","description":"Square D LC1K06107F7 Contactor 575VAC 6Amp Iec +Options (Nri)|SQUARE D LC1K06107F7: CONTACTOR 575VAC 6AMP IEC +OPTIONS","Coil Voltage":"110 VAC AT 50/60 HZ","Sub-Category":"Magnetic Contactor","UPC 12 Digit":"785901641513","Number of Poles":"3","Prop 65 warning":"THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING: ANTIMONY OXIDE & ANTIMONY TRIOXIDE WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CARCINOGEN HARM. FOR MORE INFORMATION GO TO WWW.P65WARNINGS.CA.GOV","lifecycle_stage":"current","Inductive Ampere":"6 AMPERE (AC-3)","Resistive Ampere":"15 AMPERE (AC-1)","Auxiliary Contact":"1NO","Manufacturer Brand":"Square D Co.","Product Description":"Square D LC1K06107F7 Contactor 575VAC 6Amp Iec +Options (Nri)","Power Rating/Voltage":"0.5 HP AT 115 VAC, 1.5 HP AT 230 VAC 1 PHASE; 1.5 HP AT 200/230 VAC, 3 HP AT 460/575 VAC 3 PHASE","Construction Standard":"IEC","Additional Information":"WITH SLIP ON TERMINAL","Full Technical Description":"Non Reversing Type; Open Enclosure; 3 Pole(S); IEC Construction Standard; 110 VAC at 50/60 Hz Coil Voltage; 1NO Auxiliary Contact; 0.5 HP at 115 VAC, 1.5 HP at 230 VAC 1 Phase; 1.5 HP at 200/230 VAC, 3 HP at 460/575 VAC 3 Phase Power Rating/Voltage; 6 Ampere (AC-3) Inductive Ampere; 15 Ampere (AC-1) Resistive Ampere; TESYS[R] Brand; With Slip on Terminal; LC1K Model","Proposition 65 Warning (CA)":"WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$59.09","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cc2ade12536e4db4432f29b54c804769.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is LC1K06107F7's UPC?","answer":"The listed UPC is 78590164151."},{"question":"What is the coil voltage on LC1K06107F7?","answer":"The coil is rated 110 VAC at 50/60 Hz, so it works on either 50 Hz or 60 Hz supply without modification."},{"question":"What are the AC-3 and AC-1 current ratings?","answer":"The inductive (AC-3) rating is 6 A and the resistive (AC-1) rating is 15 A. Use the AC-3 figure for motor switching and AC-1 for heater or resistive loads."},{"question":"Where can I buy LC1K06107F7 and how is it quoted?","answer":"The part is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/LC1K06107F7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/LC1K06107F7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}